Naxa NPB-262 User manual

Page 2 Naxa Electronics
Table of Contents
Location of Controls..................................................... 3
Main Unit......................................................................................... 3
Remote Control.............................................................................. 5
Power Source................................................................. 6
AC Operation................................................................................... 6
DC Operation ...................................................................................7
Basic Functions..............................................................7
Turning the Unit On/Off.................................................................7
Setting the Function Mode ...........................................................7
Adjusting the Volume....................................................................8
Equalizer (EQ) Function ................................................................8
ID3 (show tag) System...................................................................8
Headphone Jack .............................................................................8
Party Light....................................................................................... 8
FM & AM Tuning Modes (Radio) ................................... 9
Tuning to a Radio Station ............................................................. 9
Auto Preset Memory / Scan......................................................... 9
Manual Preset Memory ................................................................ 9
CD Mode (CD and MP3 Discs).......................................10
Supported Disc Formats............................................................. 10
Loading a Disc............................................................................... 10
Playing a Disc...........................................................................11
Programming Tracks .................................................................... 11
Repeat/Random/Intro Play (P-mode)......................................12
USB Mode .....................................................................12
Playing MP3s From USB Memory...............................................12
Bluetooth® Mode........................................................13
Connecting a Device for the rst time (Pairing) ......................13
Playing Connected Devices ........................................................ 14
Aux Mode......................................................................14
MIC Jack Operation......................................................14
Guitar Jack Operation .................................................15
Warnings and Precautions..........................................15
Specications ..............................................................18
Support ........................................................................19

www.naxa.com Page 3
Location of Controls
Main Unit
1. Display 4. DIR/MEM/10 +
button
2. USB Port 5. DIR/MEM/10 -
button
3. Remote control
compartment
6. PROG/P-MODE
button
7. 6.3mm MIC input
jack
18. 6.3mm guitar
input jack
8. 3.5mm AUX IN jack 19. PREVIOUS/RE-
VERSE button
9. MIC Volume +
button
20. VOLUME dial
10 MIC Volume –
button
21. TUNING dial
11. Speaker guard 22. STOP button
12. Left/Right speakers 23. ID3 button
13. NEXT/FORWARD
button
24. Telescopic
antenna
14. PLAY/PAIR button 25. EQ button
15. GUITAR Volume +
button
26. LIGHT button
16. GUITAR Volume –
button 27. FUNCTION button
17. 3.5mm headphone
jack
28. POWER/STANDBY
button

Page 4 Naxa Electronics
29. Left/Right Subwoofer
30. Battery compartment door
31. Carrying strap
32. Heat emission vents
33. AC power cable socket

www.naxa.com Page 5
Remote Control
1. Function
2. Mute
3. Memory
4. Equalizer
5. Directory/Memory/10 Up & Down
6. Previous/Reverse and Tuning-
7. Play/Pause
8. P-Mode (Play mode)
9. Stop
10. Pair
11. Next/Forward and Tuning +
12. ID3 (show MP3 info tags)
13. Volume Up & Down
14. Light
15. Program
16. Standby (Power)
17. Remote Transmitter
18. Battery Compartment
 Please remove the plastic protector from the bat-
tery compartment before using for the rst time.

Page 6 Naxa Electronics
Remote Control Operation
To operate the unit with the remote control, point the
remote transmitter [17] of the remote control at the IR
sensor on the front display panel of the unit. Press the
buttons on the remote control to use it.
The remote works best at a
distance of no further than 20
to 23 feet and within 30 de-
grees to eitherside ofthe sen-
sor. Bright sunlight or other
lighting conditions inthe room
can interfere with the remote
control. If remote operation is
unsatisfactory or stops work-
ing entirely, try using a new
battery in the remote or try
darkening the room.
Replacing the Remote Control Battery
The remote control includes one CR2025 (3V) lithium
battery. Remove the plastic protector from the bat-
tery compartment before using the remote for the rst
time.
•To replace the battery,
gently push the clasp to
the right and then slide
the battery compartment
tray out. Remove the old
battery and install a new
lithium battery (type CR-
2025) in the tray. The posi-
tive side of the battery
should face up.
•Slide the tray back into
the compartment until the
clasp clicks into place.
6~7METER
30
0
30
0

www.naxa.com Page 7
Power Source
This unit is designed to operate on or AC/DC electrical
systems.
AC Operation
Plug one end of the power cord into the AC power in-
put on the unit; plug the other end into a household AC
outlet. (Battery operation will be disabled automati-
cally when AC power is used).
DC Operation
Open the battery compartment door [30]. Load 10
pieces of UM-1/D size batteries (not included) into the
compartment, taking care to match the +/– polarities
marked inside the compartment.
ѥRemove batteries if they are empty or not
being used for a long period of time.
Batteries contain chemical substances and
should be disposed of properly. Check your
local regulations before throwing batteries
in the trash.
Basic Functions
Turning the Unit On/O
Press the POWER button [28] to turn the unit on or off.
Setting the Function Mode
There are 5 function modes; press the FUNCTION but-
ton [27] to change modes. The 5 modes are:
1. FM: Listen to FM radio broadcasts. (This is the de-
fault mode when you turn the unit on.)
2. AM: Listen to AM radio broadcasts.
3. CD: Play compact discs (CD-audio or CD-MP3).
4. USB: Play MP3s from USB memory sticks.
5. BLUETOOTH: Stream audio from wireless players
with Bluetooth®.

Page 8 Naxa Electronics
The current function mode will be shown on the display
[1] when you turn on the boombox.
 The unit will automatically switch to AUX
mode when a 3.5mm AUX cable is connect-
ed to the AUX input jack [8]. Disconnect the
cable to exit AUX mode.
Adjusting the Volume
Turn the VOLUME dial [20] on the unit to increase or
decrease volume. You may also use the remote control
to adjust the system volume.
Equalizer (EQ) Function
Press the EQ button [25] during playback to change
equalizer presets. The presets are: FLAT, CLASSIC,
ROCK, POP, JAZZ, and 3D.
Choose a preset that best matches the style of music
that is playing; the presets have been calibrated to en-
hance your audio enjoyment.
ID3 (show tag) System
Some MP3 les are encoded with information such as
the name of the song, the artist, and the album. To-
gether, this information is called an “ID3 tag”.
Press the ID3 button [23] to cycle through which infor-
mation to display when playing an MP3 le, or choose
not to show any ID3 information at all.
Headphone Jack
To use headphones with your Boombox, lower the vol-
ume before connecting them to the 3.5mm Headphone
jack [17]. Once connected, slowly adjustthe volumeto a
comfortable level. The speakers will be disabled when
headphones are connected.
ѥCaution: Listening with headphones at high
volume levels may cause permanent hear-
ing loss.

www.naxa.com Page 9
Party Light
To change the party light effects, press the LIGHT but-
ton [26]. You can choose from ve different preset
modes.
To disable the party light, press the LIGHT button [26]
until the lights turn off and the display [1] reads “LIGHT
OFF”.
FM & AM Tuning Modes
(Radio)
Listen to FM or AM radio broadcasts. Press the FUNC-
TION button [27] until the display [1] reads FM or AM,
respectively.
•To optimize reception when listening to stations on
the FM band, extend the telescopic antenna to its
full length. To optimize reception for AM band sta-
tions, gently move the unit around, or position the
unit in an open place.
Tuning to a Radio Station
If you know the station frequency that you want to
tune to directly:
•Tune to a station by turning the TUNING dial [21].
The station frequency is shown on the display [1].
•To tune to a preset station:
•To tune to the next preset station, press the DIR/
MEM/10+ button [4].
•To tune to the previous preset, press the DIR/
MEM/10– button [5].
Auto Preset Memory / Scan
To scan for stations within reception range and save
them to preset memory automatically, press the PLAY/
PAUSE/PAIR button [14]. After the unit is nished scan-
ning, the unit will automatically tune to preset number
1 (P01).

Page 10 Naxa Electronics
Manual Preset Memory
Choose which stations to save in preset memory in-
stead of scanning automatically.
1. Turn the TUNING dial [21] to tune to the station
that you want to save as a preset (e.g., 93.10).
2. Press the PROG/P-MODE button [6]. “P01” will
ash on the display to indicate that you are sav-
ing the station as Preset Memory 01. (To change the
preset memory number, press the DIR/MEM/10+
[4] or DIR/MEM/10– [5] buttons.)
3. Press the PROG/P-MODE button [6] to nish saving
the station (e.g., P01 is now set to 93.10).
4. To save another station, repeat steps 1 to 3. You
may save up to 30 FM stations and 10 AM stations.
CD Mode (CD and MP3
Discs)
Play CDs with audio or MP3 les. Press the FUNCTION
button [27] to select “CD” mode.
Supported Disc Formats
This unit can play all digital audio CD/MP3, nalized
digital audio CD-Recordable (CD-R) discs, nalized
digital audio CD-Rewritable (CD-RW) discs, and CD-DA
formatted digital audio CD/CD-R/CD-RW discs.
Loading a Disc
1. Press PUSH TO OPEN on the CD door to open it; the
display [1] will read “OPEN”.
2. Place the compact disc into the tray with the label
side facing up.
3. Close the CD door; the display will ash “TOC READ”,
and then show the total number of playable tracks
on the disc. Playback will start automatically.