Naxa NAS-3097 User manual

Instruction Manual
Please read carefully before use and keep for future reference.
Portable Bluetooth®Speaker
NAS-3097
with LED Flashing Lights

Important Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
an equilateral triangle, is intended to alert the user
to the presence of uninsulated “dangerous volt-
age” within the product’s enclosure that maybe of
shock to persons.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of impor-
tant operating and maintenance (servicing) instruc-
tions in the literature accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR
MOISTURE.
WARNING: This product contains lead, a chemical known
to the State of California to cause cancer and birth defects
or other reproductive harm. Wash hands after handling.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accor-
dance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including am-
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has
two blades and a third grounding prong. The wide blade
or the third prong are provided for your safety. If the pro-
-
trician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
Page 2 Naxa Electronics

11. -
ufacturer.
12. Use only with the cart, stand, tripod,
-
facturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination
to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
14. -
ing is required when the apparatus has been damaged in
any way, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the ap-
paratus, the apparatus has been exposed to rain or mois-
ture, does not operate normally, or has been dropped.
FCC NOTICE
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must ac-
cept any interference received, including interference that
may cause undesired operation.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reason-
able protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accor-
dance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and
receiver.
•Connect the equipment into an outlet on a circuit differ-
ent from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician
for help.
CAUTION ON MODIFICATIONS
grantee of this device may void the authority granted by the
FCC to operate the equipment.
www.naxa.com Page 3

Page 4 Naxa Electronics
At a Glance
8. SD Card Slot
Hold to turn the speaker on or off.
Press to change the LED light.
3. Skip Backward
Volume -
Hold to decrease the volume.
Press to skip back a track.
1. Mode Button
DC 5V USB charge port
Press to switch between inputs.
(Bluetooth®/USB-MicroSD/FM/AUX)
2. Play/Pause Press to play or pause playback.
6. AUX-In Jack 3.5mm auxiliary input for connecting
external devices.
USB port to stream music from a
flash drive.
4. Power Button
LED Light 9. USB Charge
Port
7. USB Port
5. Skip Forward
Volume +
Hold to increase the volume.
Press to skip forward a track.
Micro SD Card slot for audio files.

www.naxa.com Page 5
Connecting to Power
Your speaker has an integrated rechargeable
battery. Upon initial use, the battery should be
fully charged to ensure optimal performance
and battery life.
Use the included USB charging cable to connect
the speaker to a USB power source to charge the
battery.
In order to extend the life of the battery, please do
not charge more than 6 hours. Over charging the
speaker can adversely impact the battery life.
Bluetooth® Mode
Your Bluetooth®speaker can wirelessly stream
audio from any Bluetooth®enabled device within
the distance of 26-33 ft. Please follow the steps
below to setup connection.
1. Plug the included Micro USB cable into the
Micro USB port on the back of the speaker
(under the detachable casing). Connect the
other end of the cable with any compatible
charger or wall outler.
2. When charging, the LED indicator on the
front of the speaker will illuminate and turn red.
When the speaker is fully charged, the LED
indicator light will turn off.
1. Ensure that the speaker is turned on.
2. Ensure that your external device is set to
Bluetooth mode.
3. Turn the speaker on by pressing the power
button. After a few seconds, the LED indicator will
begin flashing as the speaker enters pairing mode.
4. On your Bluetooth-enabled external device,
navigate to the Bluetooth settings menu and
initiate a device search.
5. After a few seconds, “NAXA NAS-3097” will
appear on the devices list. Select it to connect and
pair.
6. If a password prompt appears, please enter
“0000” to continue pairing.
NOTE: If your external device’s Bluetooth version
is below 2.1, you may be asked for a password.

Page 6 Naxa Electronics
6. You will hear a tone once you have paired
successfully.
7. If pairing was unsuccessful, please repeat the
steps above.
AUX-IN Mode
Connect devices without Bluetooth®by using the
AUX connection. The inlcuded 3.5mm auxiliary
cable is required to make this connection.
Listening to Music Wirelessly
Function
Increase Volume
Decrease Volume
Pause
Operation
Playing Music
Button
Playing Music
Playing Music
Play
Previous Track
Next Track
Pause
Playing Music
Playing Music
Press and hold the + button to
increase the volume.
A tone indication will alert you once volume has
reached maximum level.
Press and hold the - button to
decrease the volume.
Press the button to
pause playback.
Press the button to
play or resume playback.
Press the - button to go back to
the previous track.
Press the + button to skip to the
next track.
Once you’ve successfully paired your external
device with the speaker, you can stream all of your
favorite music through the speaker in high-quality
audio. Simply open your desired music app and
press play.
You can control the music, track, and volume of
what you listen to from either your external device
or via the controls on the speaker itself.
All audio, including music, games, videos, notifica-
tions, and calls will be routed through the speaker.
NOTE: Volume levels on your device and on the
speaker are controlled separately.
1. Turn the unit on.
2. Press the MODE button to select the AUX
input.
3. Take one end of the 3.5mm aux cable and insert
it into the speaker.

Listening to FM Radio
www.naxa.com Page 7
4. Take the other end of the included auxililary
cable and insert it into the aux-in port on the
desired external device.
5. Select the song you wish to play on your external
device and press play.
Using USB & Card Mode
1. Turn the unit on.
Insert a USB drive or Micro SD card and music
will automatically begin playback.
2. Insert a USB flash drive or a Micro SD card
into the respective port or slot on the speaker
and the audio files will automatically play.
3. Press + or - to skip forward or skip back
through the tracks.
4. Briefly press the Play/Pause button to pause
or resume playback.
1. Turn the unit on.
2. Press the MODE button until you hear
the FM Radio input.
3. Press the button for searching and
storing preset radio stations within the
frequency range of 87.5-108Mhz.
4. Press the + or - buttons to listen to the
next and previous preset radio stations.
5. Hold the + or - buttons to adjust the
volume up or down.
If you insert a USB drive or MicroSD card while in
Bluetooth®Mode, the unit will disconnect from
Bluetooth®and begin playback in USB or MicroSD
mode. Press the Mode button to return back to BT.
While playing the FM Radio, plug in the FM
c
3.5mm auxiliary cable (included) into the Aux-in
port in order to establish a better reception.
Both cables can serve as an antenna, while the
auxiliary cable can search for more stations than
the Micro USB.
able (included) into the Micro USB port or the

Page 8 Naxa Electronics
Press and hold the MODE button to switch between
different inputs on the unit. The inputs are as
follows: Bluetooth®/ USB - MicroSD / FM / AUX.
When the unit is not in use, please turn off the unit
to save battery life.
Do notovercharge the unit. Every charge should
not exceed 4 hours.
NOTES
Bluetooth Version
FM Frequency
Playtime
Specifications are subject to change without prior
notice.
Speaker Output
4.1
100Hz~20KHz
Between 1-2 Hours
Charge Voltage DC 5V (USB)
26-33 Feet
Bluetooth Range
Built-in Rechargeable battery 1500 mAh Li-Polymer
Accessories
1 x Bluetooth Portable Speaker
1 x Owner’s Manual
1 x USB Charging Cable
1 x 3.5 mm AUX cable
1 x FM Cable
5W x 2
Symptom
Low sound level
Audio distorted
No Sound at all
Possible Cause
Source (Tablet, Mobile Phone,
laptop, etc) volume too low.
Battery dead
Troubleshooting Guide
Solution
Adjust source volume
Charge battery
Battery nearly drained/ dead Charge battery
Source (Tablet, Mobile Phone,
Source Volumed turned down.
Media paused on source.
Turn the
source on.
Turn on Speaker.
Adjust volume source.
Play media from source
This guide lists common problems and their solutions.
solutions. Please refer to this guide before requesting
service. If you need further assistance, please contact
Naxa Technical Support @ www.naxa.com/naxa_support/

www.naxa.com Page 9
Support
If you have problems with your device, please re-
viewthe instructions in this manual. Please also visit
us on the web at www.naxa.com to get the latest
news, alerts, and documentation for your device.
For additional assistance, please contact Naxa
Technical Support.
NAXA Technical Support
2320 East 49th St.
Vernon, CA 90058
866-411-6292
http://www.naxa.com/naxa_support/