Naxa NAS-3106D User manual

Dual TWS Bluetooth® Speaker
Combo
NAS-3106D
Instruction Manual
Please read before operating product

2
Thank You
We know you have many choices when it comes
to technology; thank you for choosing us here at
Naxa Electronics. Established in 2001 in Los An-
geles, California, we are dedicated to delivering
products that entertain and delight. We trust that
you will be happy with your purchase. Please
read this manual carefully and save it for refer
and other product material at our website. Come
visit us on the web at www.naxa.com and see all
that we have to o󰀨er!

3
In The Box
Please take a moment to make sure that you
have everything in the list below. Although we
make every e󰀨ort to ensure that each Naxa
device is securely packed and sealed, we know
a lot can happen in between us and you. If
anything is missing, check back with your local
retailer to get immediate assistance. If they can
not help you, please contact our Naxa Support
team at www.naxa.com/supportcenter/.
• NAS-3106D (Two Speakers)
• USB charging cable

4
Features
• Stereo speakers deliver outstanding power
and sound (5W x 1)
• Play music wirelessly from your Bluetooth®
enabled smartphone, tablet, or laptop
• TWS function allows you to connect speakers
and seamlessly stream music from both across
rooms
• Manually connect to external devices to stream
music via memory card,AUX IN, or USB
• Use as a speakerphone with a connected
smartphone
• Built-in rechargeable battery

5
At A Glance
1
2
3 4
5
6
7
8
9
1. Charge Indicator
(Red when Charging,
o󰀨 when full)
2. Charge Port
3. AUX Port
4. USB Slot
5. TF Card Slot
6. Power Switch
7. Volume Down
8. Pause/Play/Mode
9. Volume Up

6
Connecting Power
Your speakers has an integrated rechargeable
battery. Upon initial use, the battery should be
charged fully to ensure optimal performance
and battery life. Use the included USB charging
cable to connect the speakers to a USB power
source to charge the battery.
• Connect the small end of the cable to the DC
5V USB charge port of the unit.
• Connect the large end of the cable to a
high-power USB port of a computer. The com-
puter should be powered on.
The Status LED will light red when the battery
is charging. When charging is complete, the
Status LED will turn o󰀨.

7
Bluetooth® Mode
This speaker allows you to listen to music
wirelessly via Bluetooth® mode. To do so, follow
these steps:
1. Turn on speaker (slide the button to “On”), the
Speaker will sound a voice prompt “BT Mode”.
in BT mode.
2. Turn on BT mode in Mobile/Device Bluetooth
menu. Next, search the model name “NAS-
3106D” click to connect. Then, after a few
seconds, the speaker will sound an audio “Ding”
to notify you of a successful connection.
If connection fails, restart device and do steps
1 & 2 again.
During Playback:
• Hold the Volume Up/Down button to control
volume.
to the next/previous track.

8
USB Mode
This speaker allows you to listen to music from
USB ash drives. To do so, follow these steps:
1. Turn on speaker (slide the button to “On”), the
Speaker will sound a voice prompt “BT Mode”.
Then, press the mode button to cycle through
modes until you are in “USB Mode”.
2. Insert the USB ash drive you wish to listen to
into the USB port.
3. Press play to begin media playback.
During Playback:
• Hold the Volume Up/Down button to control
volume.
• Briey press the Volume Up/Down button to go
to the next/previous track.

9
TF Mode
This speaker allows you to listen to music from
TF memory cards. To do so, follow these steps:
1. Turn on speaker (slide the button to “On”), the
Speaker will sound a voice prompt “BT Mode”.
Then, press the mode button to cycle through
modes until you are in “TF Mode”.
2. Insert the memory card you wish to listen to
into the TF card slot.
3. Press play to begin media playback.
During Playback:
• Hold the Volume Up/Down button to control
volume.
• Briey press the Volume Up/Down button to go
to the next/previous track.

10
AUX Mode
This speaker allows you to listen to music from
external devices via 3.5mm auxiliary connection.
To do so, follow these steps:
1. Turn on speaker (slide the button to “On”), the
Speaker will sound a voice prompt “BT Mode”.
Then, press the mode button to cycle through
modes until you are in “AUX IN” mode.
2. Insert one end of an auxiliary cable (not
included) into the 3.5mm AUX port on the
speaker.
3. Insert the other end of the auxiliary cable into
the external media device you wish to listen to
music from.
4. Press play to begin media playback.
During Playback:
• Hold the Volume Up/Down button to control
volume.
• Briey press the Volume Up/Down button to go
to the next/previous track.