nbf Signature Series CH51999 User manual

TABLET
RIGHT ARM
QTY: 1
ASSEMBLY INSTRUCTIONS
NEX NESTING CHAIR w TABLET / 2 PACK
CUSTOMER SERVICE HOTLINE
800-626-6060
Congratulations on the purchase of your new Signature Series chairs!
1
2
3
4
5
6 7
PARTS –
CHAIR BODY
QTY: 1
LONG BOLTS
QTY: 2
SHORT BOLTS
QTY: 2
TABLET
BOLTS
QTY: 2
ALLEN WRENCH
QTY: 1
BOLT COVERS
QTY: 4
(2 per chair)
WWW.NBF.COM
TIP: Do not tighten bolts one at a time. Instead, tighten each a little, alternating a few turns at a time until all are tight..
remove all the parts from the carton and verify part quantities as indicated on this parts list.
51053-b
STEP 1 Fasten the TABLET RIGHT ARM 7and a standard
LEFT ARM 2to the CHAIR BODY 1using the
ALLEN WRENCH 4and both LONG 6and
SHORT 6BOLTS.(short bolts at the top, long bolts at
the bottom).
STEP 2 Fasten the TABLET 3to the TABLET RIGHT ARM 2
using the ALLEN WRENCH 4and both of the two
TABLET BOLTS 7.
SHORT BOLT
TABLET ARM
TABLET ARM
LONG BOLT
TABLET BOLT
TABLET BOLT
BOLT COVER
Once all bolts are tight, insert BOLT COVERS 5
over the bottom bolts in the arms.
STANDARD
LEFT ARM
QTY: 1
TABLET
QTY: 1

NESTING AND FUNCTIONS
NEX NESTING CHAIR w TABLET
CUSTOMER SERVICE HOTLINE
800-626-6060
WWW.NBF.COM 51053-b
CHAIR WITH TABLET NESTING