NBS-Cam MH961 User manual

UserGuide
MH961&MH995
HD Color LCD Monitor
Split-view（7”）/（10.1”）
Please read this manual thoroughly before operating the unit,
and keep it for future reference.
V1711.01
1.855.730.5555
www.nbs-cam.com

CONTENT
1. Precautions 3
2. Accessories 5
3. Connections 6
4. Specifications 7
5. Menu operation and functional specification 8
5.1 IR remote control 8
5.2 Menu operation 9
5.2.1 Desktop 9
5.2.2 Home menu 10
5.2.3 Volume 10
5.2.4 Mode 11
5.2.5 Source 11
5.2.6 Setting 12
1.855.730.5555
www.nbs-cam.com

1.PRECAUTIONS
●Storageandkeeping
1. Do not expose the monitor to excessive heat or cold. The storage temperature of this device is -30~+80℃, and the
operating temperature is -20~+70 ℃. Battery operating temperature is 0-70℃. The humidity is RH90%
2. Never use this device near a bathtub, wash basin, kitchen, damp basement, swimming pool or similar places.
3. Never use this device in environments with excessive moisture, dust or smoke.
4. Avoid dropping or striking this device.
5. Avoid using this device in enclosed spaces, areas with excessive vibration or subject to severe impacts.
6. Never puncture, scratch or use abrasive cleaning materials on this device.
7. Do not place cables where they may be pinched or stepped on.
8. Leave at least a 2" space between the monitor and walls, cabinets or other objects to allow adequate air circulation
around the device.
9. The monitor is not designed to be waterproof.
●Operatingprecautions
1. The device may be powered by a 12 or 24 volt automotive battery or vehicle electrical system.
2. Make sure all cables are connected properly. Observe polarity. Improper cable connections may damage the
monitor. Remove the power cable connections when you do not intend to use the unit.
3. The back-up battery can be recharged when the power is on.
WARNING!
1. High voltage is present within the monitor. The opening of the case should be by professionals.
2. Do not watch the video while driving unless you are monitoring only.
SPECIAL NOTICE
Occasionally, a few highlights or dark spots may occur on the LCD screen. This is a very common phenomenon in active
matrix display technology, and doesn't necessarily indicate any defec
ts or faults. Never try to repair this device by
yourself. In case of any problems, please turn off the display at once and notify our company or authorized dealer. The
monitor is a complex device. Any disassembly or modification may lead to damage and void the warrantee.
1.855.730.5555
www.nbs-cam.com
-3-

1.PRECAUTIONS
●Maintenance
1. Remove all the cable connections from the monitor before cleaning the device.
2. Use a mild household detergent and clean the unit with a slightly damp, soft cloth.
3. Never use strong solvents such as thinner or benzine, as they might damage the finish of the device.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
.
CAUTION
You are cautioned that any changes or modifications not expressly approved in this manual could void your
warrantee and necessitate expensive repairs.
This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient magnitude to constitute risk of electric shock to persons.
This symbol is intended to alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
This symbol is intended to alert the user not to dispose of electrical and electronic equipment.
1.855.730.5555
www.nbs-cam.com
-4-

2.ACCESSORIES
U Support Bracket Center Mount Bracket
Sun shield
Power cable
Angle adjustment screws
IR remote control
SPECIAL NOTICE
Accessory supply may be different for different application.
1.855.730.5555
www.nbs-cam.com
-5-

3.CONNECTION
Wiredefinition Description
White 4 pin male Channel Left Input
Blue 4 pin male Channel Right Input
Green 4 pin male Channel Front Input
Brown 4 pin male Channel Back Input
Single Red wire To positive power supply for DC：10~32V
Single Black wire To GND
Single White wire To positive power wire of Left
Single Blue wire To positive power wire of Right
Single Green wire To positive power wire of Front
Single Brown wire To positive power wire of Back
1.855.730.5555
www.nbs-cam.com
-6-

4.SPECIFICATIONS
HD Color LCD Monitor – Split view
MH961（7”）/ MH995（10.1”）
4 Channel 7’’ /10.1’’ HD single-view monitor with LVDS interface, support input up to resolution at 1920*1080
Support 4 channel cameras in PAL / NTSC / HD-AHD、HD-TVI、HD-CVI (1080P)
Support 1080P video output.
Image can be set to horizontally flipped, vertically flipped, normal and mirror Image; menu characters remain normal
while being set to mirror image.
Channels can be named.
Support 1 x HDMI video input, easy connection to PC or smart electronic devices etc.(optional)
Capacitive touch-screen
Support 4 x triggers, trigger priority & trigger delay selectable.
Support auto scan, scan channel and time selectable.
Support Automatic Backlight Control and manual selection in 3 levels.
Parking line display
With 1.5W speaker
Menu operation by buttons control, remote control or touch screen control.
Support 9 languages OSD (English, German, Japanese, Russian, Chinese, Italian, Spanish, French, Dutch)
Working voltage: 10-32V, with short circuit protection and short circuit alarm function.
Compliance with CE/FCC/EMARK tests
1.855.730.5555
www.nbs-cam.com
-7-

5.MENUOPERATIONANDFUNCTIONALSPECIFICATION
●IRRemotecontrol
●MUTE (Mute):
Press to select ENABLE/MUTE sound.
●POWER (Power switch):
Press to turn on/off the monitor.
●VOL:
Volume decrease and menu selection left
●VOL:
Volume increase and menu selection right
●MENU:
Call home menu or return to previous menu.
●UP:
Move up the menu cursor, or switch screen display mode when there is no
pop-up menu and signal source is selected as camera
●DOWN:
Move down the menu cursor, or switch screen display mode when there is no
pop-up menu and signal source is selected as camera
●MODE:
Switch input source between CAMERA and HDMI
●SEL :
Confirmation button
●P/N: Null
●LANG:
Enter the Language setup Menu
●REST:
System reset button
●AV: Null
NOTICE
1. Please align the remote control with the infrared-receiving window on the monitor to operate.
2. Never disassemble the remote control or allow it to drop, or become wet.
3. Press the control buttons firmly. Allow 2 seconds for the picture to change.
1.855.730.5555
www.nbs-cam.com
-8-

5.MENUOPERATIONANDFUNCTIONALSPECIFICATION
●Menuoperation
1.Desktop
●Touch anywhere in White lined section to call home menu.
●When signal source is selected to be cameras, image display mode can be switched by sliding to left/right on screen
in the order: Left > Right >Front >Back > Left.
1.855.730.5555
www.nbs-cam.com
-9-

5.MENUOPERATIONANDFUNCTIONALSPECIFICATION
2.Home
●Touch the icons to enter the menu or touch the area out of the white lined to exit.
3.Volume
●Drag the slider on volume bar to adjust volume.
●Click speaker icon to set Mute or Unmute.
1.855.730.5555
www.nbs-cam.com
-10-

5.MENUOPERATIONANDFUNCTIONALSPECIFICATION
4.Mode
● Click icon to switch the channel (LEFT / RIGHT / FRONT / BACK).
5.Source
●Automatic recognition of signal input.
●Supports video standards: NTSC/PAL, AHD/HDT/HDC1080P/720P.
●Support multiple HDMI input resolutions: 1920x1080，1600x900, 1440x900, 1366x768, 1280x1024, 1280x720, 1024x768, 8
00x600, 720x576, 720x480, 640x480.
1.855.730.5555
www.nbs-cam.com
-11-

5.MENUOPERATIONANDFUNCTIONALSPECIFICATION
6.Setting
6.1Camerasetting
●Set Camera name within 8 digits ( max.)
1.855.730.5555
www.nbs-cam.com
-12-

5.MENUOPERATIONANDFUNCTIONALSPECIFICATION
6.2Parkingline
●Touch to select Line 1 or Line 2 and drag cursor to adjust.
6.3Language
●Touch to select language for OSD.
1.855.730.5555
www.nbs-cam.com
-13-

5.MENUOPERATIONANDFUNCTIONALSPECIFICATION
6.4Trigger
●Trigger delay range: 1~60s;
●Trigger priority: 1~4;
●Trigger function takes priority over Auto Scan function.
●When there is trigger, signal source will be automatically switched to the working Camera for display and come back to the
previous displaying channel after the trigger ends.
●Support trigger priority.
6.5AutoScan
●Auto Scan Delay Range:1~60s.
1.855.730.5555
www.nbs-cam.com
-14-

5.MENUOPERATIONANDFUNCTIONALSPECIFICATION
6.6PowerOn
●Power On Display setting only displays under camera signal source.
6.7Standard
The monitor will detect the standard automatically when set Automatic ON.
Note: For quick display, please set Automatic OFF and use manual selection per your specific needs. E.g.: If you use an AHD
camera at 1080P25, select as above. Or press to setup formats of all channels automatically.
1.855.730.5555
www.nbs-cam.com
-15-

5.MENUOPERATIONANDFUNCTIONALSPECIFICATION
6.8System
●Set Menu Lock ON to disable touch control.
●Menu Lock can be enabled/disabled by pressing the physical power button on the monitor for 3 seconds while menu is off.
1.855.730.5555
www.nbs-cam.com
-16-