NBS Technologies JAVELIN J210i User manual

Quick
Start!
JAVELIN J210i
Colour Card Printer
and
JAVELIN J205
Monochrome Card Printer
Before starting to work with your new JAVELIN
card printer, please refer to this Quick Start guide.
For more complete information regarding all
aspects of your printer’s operation, please refer to
the printer user’s manual on the CD rom.
www.nbstech.com
Cleaning
In order to maintain printer performance, it is important that it is cleaned
regularly.
Refer to user’s manual chapter 4 for cleaning procedures.
Maintenance
It is very important to maintain your Javelin card printer properly according
to the instructions provided in the user’s manual.
If you have any difficulty with your new Javelin card printer and have not been
able to find a solution in the user’s manual, please contact your dealer or
visit our website: www.nbstech.com
How to return your printer
It is very important that all packing material is safely kept in case you need to
move or re-ship the printer. Be sure the complete packing material is stored
in a dust free environment.
Remove printer ribbon cartridge and card cleaning cartridge prior to
packaging the printer for shipment and place them back in the dedicated
plastic bags and areas in the printer box.
Before returning the printer to your dealer or to NBS, please refer to
Appendix D of the user’s manual.
Thank you for choosing the JAVELIN card printer!
J210i/J205 QS
September 2004
R
R
R
R

Setup
1. Unpack your JAVELIN card printer
After unpacking your Javelin card printer, make sure the following
items are included:
If any items are missing, please contact your dealer.
2. Install card cleaning cartridge
Open lid by pressing the cover release buttons on the sides of your printer.
The card cleaning cartridge is packed separately from the printer in a
protective plastic bag.
Carefully remove and install cartridge into printer following the rail guides, line
up arrows. Ensure the assembly locks in place.
Refer to user’s manual chapter 2 for more information.
3. Loading ribbon
Open lid by pressing the cover release buttons on the sides of your printer.
Install ribbon cartridge into the slots and gently press down to engage.
Close lid securely.
Refer to user’s manual chapter 2 for more instructions.
4. Loading cards
First shuffle a stack of new cards to reduce any electrostatic charge.
Always handle cards by their edges. Close card cover before printing.
Refer to user’s manual chapter 2 for more instructions.
5. Indicators
❏Power cable
❏Interface cable
❏CD rom
❏Ribbon cartridge
❏Cleaning kit
❏Cleaning cartridge
❏Quick Start guide (this document)
ON FLASHING
POWER ON
READY
OUT OF
RIBBON OR CARD
HARDWARE
OR FATAL ERROR
Refer to troubleshooting
COMMUNICATION ERROR
CLEANING
RECEIVING DATA
PROCESSING
Green
Orange
Red
R