NCR 7403-K240 User manual

7403‐K240
SolidStateDrive
KitInstructions

IssueA

Revision Record
Issue Date Remarks
AFeb2009Firstissue
 
 

1
Introduction
Thiskitcontainsa2.5”solidstatedriveandmountingbracketfortheRealPOS70XRT.
26168f
Solid State Disk, 2.5 in. SATA
006-8614806 (80GB)
Media Bracket Assembly
. 497-0462376 Media Bracket
. 006-8613167 Screw, M3 x 6mm, Phillips, Pan Hd.,
Ext. Tooth Washer

Installation Procedures
Caution: StaticElectricityDischargemaypermanentlydamageyoursystem.
Dischargeanystaticelectricitybuildupinyourbodybytouchingyourcomputer’s
caseforafewseconds.Avoidanycontactwithinternalpartsandhandlecardsonly
bytheirexternaledges.
1. Disconnectpowertotheterminal.
Caution: DisconnecttheACpowercordbeforedisassemblingtheterminal.The
ON/OFFswitchdoesNOTremovepowertotheunit.
a. Insert the Security Key and turn it 90 degrees clockwise.
b. Remove the Front Cover.
26124
Security Key
Front Base Cover


2
c. Pivot the top of the Front Base Cover toward the front of the unit and remove it from
the terminal.
26032c 
d. Disconnect the Power Cord from the Power Supply.
26135c
AC Power Cord


3
2. InstallthePrimarySSDinthelowerHDDslot.
26484a
Solid State Drive

3. ConnecttheACPowerCord.
4. InstalltheFrontBaseCoverandlocktheSecurityLock.
