NCR 7772-K300 User manual

Kit Instructions
Bracket, Tamper Resistant, Integrated I/O
7772-K300/K310
Issue B

The product described in this document is a licensed product of NCR Corporation.
NCR is a registered trademark of NCR Corporation. Product names mentioned in this publication may be
trademarks or registered trademarks of their respective companies and are hereby acknowledged.
Where creation of derivative works, modifications or copies of this NCR copyrighted documentation is
permitted under the terms and conditions of an agreement you have with NCR, NCR's copyright notice
must be included.
It is the policy of NCR Corporation (NCR) to improve products as new technology, components,
software, and firmware become available. NCR, therefore, reserves the right to change specifications
without prior notice.
All features, functions, and operations described herein may not be marketed by NCR in all parts of the
world. In some instances, photographs are of equipment prototypes. Therefore, before using this
document, consult with your NCR representative or NCR office for information that is applicable and
current.
To maintain the quality of our publications, we need your comments on the accuracy, clarity,
organization, and value of this book. Please use the link below to send your comments.
Email: [e-mail]
Copyright © 2020–2021
By NCR Corporation
Global Headquarters
864 Spring St NW
Atlanta, GA 30308
U.S.A.
All Rights Reserved
Revision Record
Issue Date Remarks
AAug 2020 First Issue
BJan 2021 Added K310

Tamper Resistant Bracket, Integrated I/O
This kit provides a Tamper Resistant Bracket for the CX7 with Integrated I/O.
•7772-K300 – Tamper Resistant Bracket, Integrated I/O, 15.6” 16:9 Display
•7772-K310 – Tamper Resistant Bracket, Integrated I/O, 15” 4:3 Display
Kit Contents
Item Part Number Description
7772-K300 Tamper Resistant Bracket, Integrated I/O, 15.6” 16:9 Display
1 497-0527994 Bracket, Tamper Resistant, Integrated I/O, 15.6” 16:9
Display
2 006-8624748 Screw, M3x6, Flat Head, Phillips, Black, With Thread
Lock
7772-K310 Tamper Resistant Bracket, Integrated I/O, 15” 4:3 Display
1 497-0526948 Bracket, Tamper Resistant, Integrated I/O, 15” 4:3
Display
2 006-8624748 Screw, M3x6, Flat Head, Phillips, Black, With Thread
Lock

2 Tamper Resistant Bracket, Integrated I/O
Installation Procedure
1. Connect the cables to the appropriate I/Oport.
Integrated USBCentric I/O (Retail) Expansion
Callout Port Name
1 Cash Drawer
2 USB24V
3 USB12V
4 24V Power In
5 Status LED
6 USB-C
7 DB9 Serial
8 DisplayPort
9 Dual USB 3.0
10 RJ50 Serial

Tamper Resistant Bracket, Integrated I/O 3
Integrated Serial Centric I/O (Hospitality) Expansion
Callout Port Name
1 RJ45 Serial
2 Dual USB 3.0
3 USB12V
4 USB24V
5 24VPower In
6 Status LED
7 USB-C
8 DisplayPort
9 Cash Drawer B
10 Cash Drawer A
11 RJ12 Serial

4 Tamper Resistant Bracket, Integrated I/O
2. Install the Tamper Resistant Bracket on the Integrated I/O (4 screws).