Neater Table User manual

Page 1 of 6
November 2013
e
a
t
e
r
.co.uk
NEATER TABLE
-
Instruction
Manual
Originally developed for use with Neater Eaters, the Neater able is very
accessible for wheelchair users. It has become popular for other activities.
Features
Neater Solutions Limited
12 Burlington Road, Buxton
Derbyshire, SK17 9AL, UK
tel: [phone]
fax: [phone]
email: [e-mail]
Important – Safety
•Ensure the set-up is stable & strong enough for your use.
•Beware of finger traps when adjusting or folding the table.
•Ensure all fixing screws are tight.
•Please do not allow people to sit on the Neater able!
•Ensure all castors are locked before use.
•Read all instructions carefully.
Sturdy Construction
Height Adjustable
Fold away
Easy Access for wheelchair users
his rear bar fits below most
wheelchair footrests
Dual-Lock Castors
able op options include:
•Standard (shown)
•Cut-away top
•Angle-adjustable top
•Rounded corner protectors

Page 2 of 6
November 2013
e
a
t
e
r
.co.uk
Under the able op
Mounting brackets with Screws
(with black plastic tops) for
holding to the frame
Guide Rail fits around
op Bar of the able Frame
he able Frame Unfolded
o adjust height:
•If top is fitted, loosen the Mounting
Bracket Screws before adjusting height
•Loosen Screw (with black plastic top)
•Press in Spring Plunger with flat of
thumb. AKE CARE not to push finger
in too far as it could get trapped.
•Adjust height ensuring Spring Plunger
engages with a hole in the Frame
- one hole at a time each side
•Ensure all Screws are retightened
•Retighten the Mounting Bracket
Screws holding the op.

Page 3 of 6
November 2013
e
a
t
e
r
.co.uk
Under the able op
-
detail
able op sitting on the Frame but not clamped
Fully clamped up
Guide Rail fits around
op Bar of the Frame
Screw
(black plastic top)
Mounting Bracket
shape fits Frame hreaded hole in Frame
to align with Screw
ighten the Screw
(black plastic top)
to clamp the op to the Frame.
his makes the table rigid.
Ensure the Screw is tight.
Hint - fitting the able op to the Frame:
Ensure the able Frame is fully open and look
underneath to ensure the Mounting Brackets are
aligned with the Frame so the Screws can be
screwed into the threaded holes and tightened.

Page 4 of 6
November 2013
e
a
t
e
r
.co.uk
Folding up the Neater able
Step 1
Release the screws holding the
able op onto the Frame.
You can remove the op completely
from the Frame for separate storage
or transport.
Alternatively, keep the Guide Rail
around the op Bar of the Frame as
you slide the op down to be kept
on the frame as shown below.
Step 2
he able op can be kept on
the Frame.
he Guide Rail holds one end.
Place the Mounting Bracket
between the two Plastic Pins
at the bottom to keep the
op in place on the Frame

Page 5 of 6
November 2013
e
a
t
e
r
.co.uk
Step 3
Fold in the left side
Step 4
Fold in the right side
his additional castor lends
support when moving the
Neater able around on its
castors when it is fully folded.
It does not make the table
stable enough to stand alone
when folded.
Always hold the folded table
or lock the castors and lean it
against something.

Page 6 of 6
November 2013
e
a
t
e
r
.co.uk
Neater able Options
Cut
-
away able op
Angle
-
Adjustable able op
Corner Protectors
(Not for use with Neater Eaters)
Lift up to the angle required.
Auto-latching brackets hold the
op in place.
o lower:
Lift the op up to a steep angle
to release the latching brackets
and lower it down.
(Not for use with Neater Eaters)
his allows you to sit up close
and rest your forearms on the
table.
Rounded soft corner
protectors can be supplied to
protect people from the
corners of the able op.
Neater Solutions Limited
12 Burlington Road, Buxton
Derbyshire, SK17 9AL, UK
tel: [phone]
fax: [phone]
email: [e-mail]