NEC MultiSync V864Q User manual

NEC Display Solutions of America, Inc.
V864Q/C86 Q Installation Guide [Ver.1.0]
www.necdisplay.com V864Q/C861Q Page 1 of 13
Contents:
Product Description and Notes Page 1
Rotation Page 1
Ventilation Recommendations Page 2
Carrying Handle Positioning Page 2
Display Dimensions
Front, Top, Rig t Side, Left Side, Bottom Page 3
Back Side Page 4
Display Dimensions wit stand Page 5
Optional Stand Dimensions Page 6
Optional Wall Mount Dimensions Page 7-8
Optional Speaker Dimensions (SP-TF1) Page 9
Compute Module Integration Page 10
Input Panel Page 11
ASCII Commands Page 11
Control Codes Page 12
Cable Connection Page 12
Browser Control Page 13
Product Description:
Type: LCD Display
Resolution: 3840 x 2160 Dimensions wit out stand: 75.9” (W) x 43.3” (L) x 2.9” (D)
Aspect Ratio: 16:9 Dimensions wit stand: 75.9”(W) x 44.7”(H) x 23.9”(D)
EMI: Class B Weig t wit out stand: 127.4 lbs. / 57.8kg
Power Consumption: 425W (Max bot units) Weig t wit stand: 137.6 lbs. / 62.4kg
BTU’s: 1450.16 BTU/ our
NO ES:
•T is document is intended to be used as a reference guide to supply useful information for a design or installation. It is not intended to be
a step-by step procedure for installation.
•Any ceilings or walls must be strong enoug to support t e monitor and t e installation must be in accordance wit any local
building codes. All mounts s ould make secure contact to wood studs.
•Distances are in inc es, for millimeters multiply by 25.4.
•Distances may vary ±5%.
ilt Angle and Rotation:
•Below is t e maximum angle t e monitor can be tilted. Note t at t e monitor can only be tilted in t e landscape position.

NEC Display Solutions of America, Inc.
www.necdisplay.com V864Q/C861Q Page 2 of 13
Ventilation Recommendations:
Dimensions below are minimum required for proper ventilation.
NO E:
•T e ventilation space s ould not be covered or closed off at t e front of t e opening. If for some reason t e opening needs to be covered,
ot er means of ventilation will need to be incorporated into t e design. Contact NEC for design review and recommendations.
Carrying Handle Positioning:

NEC Display Solutions of America, Inc.
www.necdisplay.com V864Q/C861Q Page 3 of 13
Display Dimensions:

NEC Display Solutions of America, Inc.
www.necdisplay.com V864Q/C861Q Page 4 of 13
Display Dimensions (cont.):
NEC strongly recommends using size M8 screws
(15-17mm + the thickness of the bracket and washers in
length). If using screws longer than 15-17mm, please
check th
e depth of the hole.

NEC Display Solutions of America, Inc.
www.necdisplay.com V864Q/C861Q Page 5 of 13
Display Dimensions (with optional S -801 stand):

NEC Display Solutions of America, Inc.
www.necdisplay.com V864Q/C861Q Page 6 of 13
able op Stand Dimensions (S -801):

NEC Display Solutions of America, Inc.
www.necdisplay.com V864Q/C861Q Page 7 of 13
Optional Slim Wall Mount (WMK-3255S):
Optional Large Wall Mount (WMK-6598):

NEC Display Solutions of America, Inc.
www.necdisplay.com V864Q/C861Q Page 8 of 13
Optional Standard Wall Mount (WMK-3257):

NEC Display Solutions of America, Inc.
www.necdisplay.com V864Q/C861Q Page 9 of 13
Optional Speaker Dimensions (SP- F1)

NEC Display Solutions of America, Inc.
www.necdisplay.com V864Q/C861Q Page 10 of 13
Compute Module Integration:
•Door on t e back of t e display can be opened by loosening captive screws.
•Separate IO Board is necessary to accompany RPi Compute Module in unit

NEC Display Solutions of America, Inc.
www.necdisplay.com V864Q/C861Q Page 11 of 13
Input Panel:
Bottom
Side (Rotated)
ASCII Common Commands:
•T is monitor supports common ASCII control commands wit many ot er NEC projectors. For more information on t is, please see our
website.

NEC Display Solutions of America, Inc.
www.necdisplay.com V864Q/C861Q Page 12 of 13
Control Codes:
NOTE: Contact your NEC representative for codes not listed.
Cable Connection
Communication Protocol:
Interface: RS-232C
Communication System: Async ronous
Baud Rate: 9600 bps
Data Lengt : 8 bits
Parity: None
Stop Bit 1 bit
Communication Code: ASCII
Interface: Et ernet (CSMA/CD
Communication System: TCP/IP (Internet Protocol Suite)
Communication Layer: Transport layer (TCP)
IP Address: 192.168.0.10 (default out of box)
Port Number: 7142 (Fixed)
Transmit Data+
Transmit Data-
Receive Data+
Receive Data-
Not Used
Not Used
Not Used
Not Used

NEC Display Solutions of America, Inc.
www.necdisplay.com V864Q/C861Q Page 13 of 13
Browser Control:
Information and control can also be available t roug t e HTTP browser control menu.
In order to accomplis t is, type: http://<the Monitor’s IP address>/pd_index.html
Note t at t e LAN Power needs to be turned on in order for t e display to be controlled w ile t e units are off.
All displays are set to t e IP address 192.168.0.10 out of t e box
Communicating network PC needs to be on t e same subnet as display t at is being communicated wit