
www.necvisualsystems.com 42VP4/42VP4D Page 1 of 11
NEC Solutions (America), Inc.
VisualSystems
42VP4/42VP4D Installation Guide
42” Plasma Displays v2.5
Contents
Product Description and Notes Page 1
Ventilation Requirements Page 2
Display Dimensions
Front,Top&Bottom Page 3
Rear Page 4
Left&RightSide Page 5
Display Dimensions w/Optional Accessories
Front&Top Page 6
Dimensions w/Optional Flat Wall Mount Page 7
Dimensions w/Optional Tilt Wall Mount Page 8
Dimensions w/Optional Ceiling Mount Page 9
Control Codes Page 10
ProductDescription
Type: PlasmaDisplay ColorCorrection: NEC CCF (Capsulated Color Filter, in panel)
Resolution: 853x480 Screen Surface: 42VP4: Anti-Reflective
42VP4D:Anti-Glare
Aspect Ratio: 16:9 Dimensions: 40”(W) x 24”(H) x 3.5”(D)
Weight: 61.8lbs
Notes
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not
intended to be a step-by step procedure for installation.
Any ceilings or walls must be strong enough to support the display and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.
4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched
horizontally to fill the screen using the menus (see “Aspect Modes” in menus and user manual).
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary ±5%.
MaximumTiltAngles
Below are the maximum angles that the display can be tilted in both landscape and portrait mode
42VP4/42VP4D Landscape 30°
Portrait 10°
Max Tilt
Downloaded From TV-Manual.com Manuals