NEC NEC Express5800 Series User manual

NEC EXPRESS5800/R320b-M4
Configuration Guide
Windows Server
2008 R2 model
Introduction
This document contains product and configuration information that will enable you to configure your system. The
guide will ensure fast and proper configuration of your NEC EXPRESS5800 server.
October 2012
Revision 8.0
NEC Corporation

CONFIGURATION GUIDE –NEC EXPRESS5800/R320b-M4 / Windows Server 2008 R2 model
NEC Corporation Revision 8.0, October 2012 2
Contents
TECHNICAL SPECIFICATION........................................................................................3
Key Features..........................................................................................................................................3
Specification..........................................................................................................................................3
EXTERNAL VIEWS .........................................................................................................5
Front and Rear Views ...........................................................................................................................5
Dimensions (mm)..................................................................................................................................7
CONFIGURATION DIAGRAM.........................................................................................8
SERVER CONFIGURATION ...........................................................................................9
1Base Models...................................................................................................................................9
22nd Processor................................................................................................................................9
3Memory ...........................................................................................................................................9
4Internal Hard Disk Drives............................................................................................................10
5Optical Drive.................................................................................................................................11
6PCI Card........................................................................................................................................11
7Other Add-in Components..........................................................................................................11
7.1 Input Devices.......................................................................................................................11
8Add-on Components ...................................................................................................................12
8.1 17-inch LCD Console Drawer..............................................................................................12
8.2 KVM Switch .........................................................................................................................12
8.3 Flash FDD............................................................................................................................12
8.4 Operating System................................................................................................................12
8.5 Tower Conversion Kit...........................................................................................................13
8.6 External Tape Drives ...........................................................................................................13
REFERENCES...............................................................................................................15
Note for Ordering ................................................................................................................................15
Server Management............................................................................................................................15
Supported PCI Cards and Installable Slots......................................................................................16
Notes for using Hyper-V.....................................................................................................................17
Copyright Notice and Liability Disclaimer........................................................................................18
REVISION HISTORY .....................................................................................................19

CONFIGURATION GUIDE –NEC EXPRESS5800/R320b-M4 / Windows Server 2008 R2 model
NEC Corporation Revision 8.0, October 2012 3
Technical Specification
Key Features
Fault tolerant technology based on GeminiArchitectureTM
Full manageability by integrated EXPRESSSCOPE Engine 2
High performance with the latest Intel® Xeon® processor 5600 series
Up to 96GB of high speed DDR3-1333 memory
Specification
Model
R320b-M4
Part Number
N8800-154F
Processor
Type
Intel® Xeon® processor X5670
Clock speed
2.93 GHz
Logical Number of
Processors
1 or 2
Cache
12 MB
Cores and Threads
6C / 12T
Chipset
Intel® 5500 Chipset with GeminiEngineTM
Memory
Type
DDR3-1333 ECC Registered DIMM
Logical Standard
Capacity
0GB
Logical Maximum
Capacity
96GB (12 x 8GB)
Memory protection
ECC, x4 SDDC
Internal Storage
Standard Capacity
0GB
Maximum Capacity
4.8 TB (8 x 600GB)
Disk Controller
SAS: 3Gb/s (Standard)
RAID
SAS : RAID 1 (Standard)
Hot Plug
Supported
Optical Disk Drive
DVD Super Multi drive 1
Optical Drive Bays
[free]
1 [0]
Logical Disk Drive Bays
[free]
8 [8]
Expansion Slots
[free]
Standard
Total: 4 slots available
2[2] x PCIe 2.0 x4 (x8 connector)
2[2] x PCIe 1.0 x4 (x8 connector)
Video
Controller (VRAM)
Integrated in Server Management Controller (32MB)
Resolution / Color
Supported
800 x 600 / 16.7M, 1024 x 768 / 16.7M, 1280 x 1024 / 65K
Interfaces
1 x VGA (15-pin mini D-sub, 1 x rear per system)
4 x USB (1 x front, 3 x rear per system)
4 x 1000BASE-T LAN connector (1000BASE-T / 100BASE-TX /
10BASE-T, RJ-45, 2 x rear per CPU/IO module)
2 x Management LAN connector (100BASE-TX / 10BASE-T,
RJ-45, 1 x rear per CPU/IO module)
Server Management
EXPRESSSCOPE Engine 2
Power Supply
100-240 VAC ± 10% 50 / 60 Hz ± 3 Hz
Power
Consumption
(Max. Config,
Operating)
1,400 VA / 1,390 Watt

CONFIGURATION GUIDE –NEC EXPRESS5800/R320b-M4 / Windows Server 2008 R2 model
NEC Corporation Revision 8.0, October 2012 4
Model
R320b-M4
Dimensions (W x D x H )
483.0 x 736.0 x 178 mm / 19.0 x 29.0 x 7.0 in (4U)
Weight (Minimum / Maximum)
46 kg / 52 kg, 101.41 lbs. / 114.64 lbs.
Temperature, Relative Humidity
(non-condensing)
Operating: 10° to 35° C / 50° to 95° F, 20 to 80%
Non-Operating: -10° to 55° C / 14° to 131° F, 20 to 80%
Regulatory and Safety
FCC, CE, BSMI, CCC, UL, CB, RoHS
Operating Systems
Microsoft Windows Server® 2008 R2 Enterprise
1Writing software is not provided for this DVD drive.

CONFIGURATION GUIDE –NEC EXPRESS5800/R320b-M4 / Windows Server 2008 R2 model
NEC Corporation Revision 8.0, October 2012 5
External Views
Front and Rear Views
Front View
AC D EF
G
H
J
N O
K L M
P Q R S T U
A
I
B
B
Legend
A.
Drive Bays
L.
CPU Fault LED
B.
UID Button
M.
Memory Fault LED
C.
DVD Super Multi Drive
N.
Module Power LED
D.
System Power LED
O.
SAFE TO PULL LED
E.
System Status LED
P.
PRIMARY LED
F.
System FT LED
Q.
IO Module Fault LED
G.
UID LED
R.
Fan Fault LED
H.
USB Connector
S.
PSU Fault LED
I.
Pull-out Tab
T.
DC Power Fault LED
J.
Power Button
U.
Temperature Fault LED
K.
Module ID LED

CONFIGURATION GUIDE –NEC EXPRESS5800/R320b-M4 / Windows Server 2008 R2 model
NEC Corporation Revision 8.0, October 2012 6
Rear View
B
G
D
C
AF
F
E
HE
I
Legend
A.
USB Connectors
F.
AC Inlet
B.
Management LAN Connector
G.
Serial Port Connector 1
C.
Module ID LED
H.
VGA Connector
D.
Data LAN Connectors
I.
PCI Slots (Full-Height)
E.
PCI Slots (Low-Profile)
1For service personnel only.

CONFIGURATION GUIDE –NEC EXPRESS5800/R320b-M4 / Windows Server 2008 R2 model
NEC Corporation Revision 8.0, October 2012 7
Dimensions (mm)
Rack mount
450
689
736
483
178
Tower Conversion (Optional)
220 804
592
327

CONFIGURATION GUIDE –NEC EXPRESS5800/R320b-M4 / Windows Server 2008 R2 model
NEC Corporation Revision 8.0, October 2012 8
Configuration Diagram
Server
Optical Drive Bay
HDD Bay HDD BayHDD Bay HDD Bay
HDD Bay HDD BayHDD Bay HDD Bay
HDD Bay HDD BayHDD Bay HDD Bay
HDD Bay HDD BayHDD Bay HDD Bay
CPU/IO Module
Backplane
CHASSIS
FRONT
CHASSIS
REAR
CPU/IO Module
PCIe1.0 x4 (x8 socket) LP
PCIe1.0 x4 (x8 socket) LP
Drive Cage
PowerSupply
Processor
DIMM #1
DIMM #2
DIMM #3
DIMM #4
DIMM #5
DIMM #6
DIMM #7
DIMM #8
DIMM #9
DIMM #10
DIMM #11
DIMM #12
Cooling Fan #1- #4
Processor
PCI Riser
PCIe2.0 x4 (x8 socket) FH
HDD Bay HDD BayHDD Bay HDD Bay
HDD Bay HDD BayHDD Bay HDD Bay
CPU/IO module #0 :
CPU/IO module #1 :
PCIe 1.0 x4 (x8 socket) LP
PCIe 1.0 x4 (x8 socket) LP
DriveCage
Power Supply
Processor
DIMM #1
DIMM #2
DIMM #3
DIMM #4
DIMM #5
DIMM #6
DIMM #7
DIMM #8
DIMM #9
DIMM #10
DIMM #11
DIMM #12
Cooling Fan #1- #4
Processor
PCI Riser
PCIe2.0 x4 (x8 socket) FH
HDD Bay HDD BayHDD Bay HDD Bay
HDD Bay HDD BayHDD Bay HDD Bay
CHASSIS
FRONT
CHASSIS
REAR
Legend: Minimum required components Standard components

CONFIGURATION GUIDE –NEC EXPRESS5800/R320b-M4 / Windows Server 2008 R2 model
NEC Corporation Revision 8.0, October 2012 9
Server Configuration
1 Base Models
Product Name / Description
Part Number
NEC EXPRESS5800/R320b-M4
no RAM, no 2.5-inch HDD
Including:
Intel Xeon Processor X5670, 1 x DVD Super Multi, EXPRESSBUILDER DVD,Active
UpgradeTM DVD
N8800-154F
2 2nd Processor
Available logical sockets: 1
Product Name / Description
Part Number
Intel® Xeon® Processor X5670 2nd Processor Kit : 2.93 GHz / 6C-12T / 12 MB, 2
processors included
N8801-043
3 Memory
Available logical slots: 6 per processor
Product Name / Description
Part Number
2GB DDR3-1333 REG Memory Kit : 2 x 2GB DIMM included
N8802-050
12GB DDR3-1333 REG Memory Kit : 2 x 3 x 4GB DIMM included
N8802-051
24GB DDR3-1333 REG Memory Kit : 2 x 3 x 8GB DIMM included
N8802-046
NOTE:
Minimum one memory kit must be installed.
4GB or more of main memory is recommended to use Hyper-V.
Memory Configuration Guideline
See the table below for the number of memory kits required in accordance with logical main memory size and number
of logical processors. Memory configurations which are not listed below are not supported in the system.
Number of Logical
Processors
Logical Main Memory
Size
Number of Memory Kits Required
2GB
12GB
24GB
1
2GB
1
-
-
4GB
2
-
-
6GB
3
-
-
8GB
4
-
-
10GB
5
-
-
12GB
6
-
-
-
1
-
24GB
-
2
-
-
-
1
36GB
-
1
1
48GB
-
-
2

CONFIGURATION GUIDE –NEC EXPRESS5800/R320b-M4 / Windows Server 2008 R2 model
NEC Corporation Revision 8.0, October 2012 10
Number of Logical
Processors
Logical Main Memory
Size
Number of Memory Kits Required
2GB
12GB
24GB
2
2GB
1
-
-
4GB
2
-
-
6GB
3
-
-
8GB
4
-
-
10GB
5
-
-
12GB
6
-
-
16GB
8
-
-
20GB
10
-
-
24GB
12
-
-
-
2
-
36GB
6
2
-
48GB
-
4
-
-
-
2
72GB
-
2
2
96GB
-
-
4
4 Internal Hard Disk Drives
Available bays: 8
Product Name / Description
Part Number
146.5GB 10K Hot Plug 2.5-inch SAS HDD : 1 x 146.5GB
N8850-042
300GB 10K Hot Plug 2.5-inch SAS HDD : 1 x 300GB
N8850-043
600GB 10K Hot Plug 2.5-inch SAS HDD : 1 x 600GB
N8850-044
73.2GB 15K Hot Plug 2.5-inch SAS HDD : 1 x 73.2GB
N8850-045
146.5GB 15K Hot Plug 2.5-inch SAS HDD : 1 x 146.5GB
N8850-046
NOTE:
Hard drives must be installed in identical pairs to configure RAID 1.

CONFIGURATION GUIDE –NEC EXPRESS5800/R320b-M4 / Windows Server 2008 R2 model
NEC Corporation Revision 8.0, October 2012 11
Required System Disk Capacity
See the table below for minimum required system disk capacity to store whole memory dump data.
It is recommended to install hard drives providing the minimum required system disk capacity to reduce the
time to resynchronize after a hard drive replacement.
Memory Size
Required System Disk
Capacity
Up to 16GB
73.2GB
20GB to 36GB
146.5GB
48GB to 96GB
300GB
5 Optical Drive
Available bays: 1
Product Name / Description
Part Number
Internal DVD Super Multi Drive : 1 x DVD Super Multi drive, not including writing software
(Standard)
6 PCI Card
Category
Product Name / Description
Part Number
LAN Controller
1000BASE-T 2ch board kit : 2 x GbE NIC
Intel® Gigabit ET Dual Port Server Adapter
N8804-009
Fibre Channel
Controller
Fibre Channel board kit (8Gbps) : 2 x FC Controller
QLogic QLE2560-SP 8Gbps Fibre Channel Adapters
N8803-038
SAS Controller
SAS Controller : 1 x SAS Controller
LSI SAS3442E-R Host Bus Adapter
NOTE: Up to one controller per module
N8803-037
NOTE:
For supported NEC Storage products to connect with N8803-038, contact your sales representative or
refer to the NEC Storage WEB site. (http://www.nec.com/global/prod/storage/)
7 Other Add-in Components
7.1 Input Devices
Category
Product Name / Description
Part Number
Keyboard
USB Keyboard
N8870-002AF
Mouse
USB Optical Wheel Mouse
N8870-012
Cable
USB cable : 1.5m USB extension cable
K410-177(1A)

CONFIGURATION GUIDE –NEC EXPRESS5800/R320b-M4 / Windows Server 2008 R2 model
NEC Corporation Revision 8.0, October 2012 12
8 Add-on Components
8.1 17-inch LCD Console Drawer
Category
Product Name / Description
Part Number
Drawer
w/ KVM
Switch
Drawer
17inch LCD Console Unit (1U/8port)
17-inch LCD, US 83-keys Keyboard, Optical mouse, 8 port KVM
switch, 1U height
N8143-77F
Cable
Switch Unit Connection Cable Set (USB, 1.8m)
1.8 m, 1 x 15-pin mini D-SUB to 1 x 15-pin mini D-SUB / 1 x
4-pin USB A
K410-118(1A)
Switch Unit Connection Cable Set (USB, 3m)
3 m, 1 x 15-pin mini D-SUB to 1 x 15-pin mini D-SUB / 1 x 4-pin
USB A
K410-118(03)
Switch Unit Connection Cable Set (USB, 5m)
5 m, 1 x 15-pin mini D-SUB to 1 x 15-pin mini D-SUB / 1 x 4-pin
USB A
K410-118(05)
Drawer
w/o KVM
Switch
Drawer
17inch LCD Console Unit 1U
17-inch LCD, US 83-keys Keyboard, Optical mouse, 1U height,
4-pin USB B to 4-pin USB Acable 2m, PS/2 Y-splitter cable 2m,
15-pin mini D-sub VGA cable 2m
N8143-76F
8.2 KVM Switch
Category
Product Name / Description
Part Number
KVM Switch
Server Switch Unit (8 server)
1U USB 8 port KVM switch
N8191-12F
Cable
KVM
Switch Unit Connection Cable Set (USB,1.8m)
1.8 m, 1 x 15-pin mini D-sub to 1 x 15-pin mini D-sub / 1 x 4-pin
USB A
K410-118(1A)
Switch Unit Connection Cable Set (USB,3m)
3 m, 1 x 15-pin mini D-sub to 1 x 15-pin mini D-sub / 1 x 4-pin
USB A
K410-118(03)
Switch Unit Connection Cable Set (USB,3m)
5 m, 1 x 15-pin mini D-sub to 1 x 15-pin mini D-sub / 1 x 4-pin
USB A
K410-118(05)
Cascading
Switch Unit Connection Cable 1.8 m
1.8 m, 1 x 15-pin mini D-sub - 1x 15-pin mini D-Sub / 2x PS/2
K410-119(1A)
8.3 Flash FDD
Order the Flash FDD if you need to prepare an alternative for a floppy drive.
Product Name / Description
Part Number
Flash FDD
USB flash emulating USB floppy disk, Native capacity 1.44 MB
N8160-86
8.4 Operating System
Product Name / Description
Part Number
Microsoft Windows Server® 2008 R2 Enterprise (1-2 Processor, 25CAL Version):
English
UL0999-436EN
Chinese Traditional
UL0999-436CT
Chinese Simplified
UL0999-436CS
Korean
UL0999-436KR

CONFIGURATION GUIDE –NEC EXPRESS5800/R320b-M4 / Windows Server 2008 R2 model
NEC Corporation Revision 8.0, October 2012 13
8.5 Tower Conversion Kit
Product Name / Description
Part Number
Tower Conversion Kit
23 inch height pedestal with front bezel
N8843-003
8.6 External Tape Drives
8.6.1 Tape Drive Selection
Refer to the section in accordance with your type of tape drives.
8.6.2 LTO / SAS
Category
Product Name / Description
Part Number
Controller
Required
SAS Controller
LSI SAS3442E-R Host Bus Adapter
N8803-037
External Cable
Required
External SAS cable
2 m, 1 x SFF-8470 SAS to 1 x SFF-8088 Mini-SAS
K410-168(02)
Tape Enclosure
Required
2U Tape Drive Enclosure
4 x 5-inch media bays, two internal SAS cables included
N8141-59F
Power Module
Recommended
Power Supply
1 x non-hot plug power supply unit for redundant configuration
N8181-54F
Internal Cable
Required
Internal SAS cable
2 m, for 2U Tape Drive Enclosure internal connection
NOTE: Required when three or more SAS connections
(including other general purpose servers) to the N8141-59F
K410-249(00)
Drive
2 bays available
Internal LTO (SAS)
LTO2, Half height, Native capacity 200GB
N8151-101
Internal LTO (SAS)
LTO3, Half height, Native capacity 400GB
N8151-102
Internal LTO (SAS)
LTO4, Half height, Native capacity 800GB
N8151-90
Internal LTO (SAS)
LTO5, Half height, Native capacity 1500GB
N8151-103
LTO
LTO2
SAS
Refer to 8.6.2
LTO3
SAS
Refer to 8.6.2
LTO4
Refer to 8.6.2
SAS

CONFIGURATION GUIDE –NEC EXPRESS5800/R320b-M4 / Windows Server 2008 R2 model
NEC Corporation Revision 8.0, October 2012 14
8.6.3 Notes for double backup
In a single backup configuration, in case a CPU/IO module or backup device fails, backup is not possible
until the failed part is repaired or replaced. If this does not meet your system requirements, consider a
double backup configuration.
Refer to the following notes on double backup configuration.
When configuring two sets of a SAS controller, a SAS cable and a backup device, two backup devices
are recognized separately by the OS. When scheduling an automatic backup job, make a job for each
backup device so that the other backup device can backup in case one device fails.
With BrightStor ARCserve Backup, backup is not executed if you enter an asterisk (*) in the group box
under the destination tab when defining a job. Be sure to create two backup jobs by correctly selecting
the device group for the group box, and entering an asterisk (*) or the name of the media in the media
box.
8.6.4 Supported backup software
See the table below for the supported backup software on NEC EXPRESS5800/R320c.
Tape drive
Backup software
Product Name / Description
Part Number
ARCserve
ARCserve
Backup Exec
ARCserve r15
ARCserve r16
Backup Exec
2010
WS2008R2
WS2008R2
WS2008R2
Internal LTO (SAS)
LTO2, Half height, Native capacity 200 GB
N8151-101
*a1
*a1
*b2
Internal LTO (SAS)
LTO3, Half height, Native capacity 400 GB
N8151-102
*a1
*a1
*b2
Internal LTO (SAS)
LTO4, Half height, Native capacity 800 GB
N8151-90
*a1
*a1
*b3
Internal LTO (SAS)
LTO5, Half height, Native capacity 1.5 TB
N8151-103
*a1
*a1
*b2
*a1: Do not disable the tape driver on the device manager.
*b2: Do not install the Symantec driver.Apply the driver which comes with the tape drive.
*b3: Use the latest driver which can be downloaded from the Symantec website
NOTE:
Disaster Recovery Option is not supported on the ft server system.
It is not supported to backup from NEC Express5800/ft series to a backup device directly using
NetBackup. However, NEC Express5800/ft series can be a backup-client machine of NetBackup.

CONFIGURATION GUIDE –NEC EXPRESS5800/R320b-M4 / Windows Server 2008 R2 model
NEC Corporation Revision 8.0, October 2012 15
References
Note for Ordering
Part numbers provided may be needed to modify by country/region when you order the products.
For example, the operable part number for N8100-1738F in EMEA is N8100-1738F-O, adding "-O", the
country-specific identifier for EMEA, after the part number.
Please consult your sales representative for your country identifier.
Server Management
The EXPRESSSCOPE Engine 2, integrated into the server, provides superior remote control and system
management features listed in the table below.
Hardware
monitoring
Temperature/voltage/power/
fan /degeneration (memory/hard drive)

Hardware event log collection

Boot monitoring
Booting, BIOS/POST stall, OS stall,
shutdown

Alerting
HW error, Boot error and OS panic
(by SNMP, E-Mail)

Remote console
POST/BIOS setup, DOS utility

(via LAN)
Panic screen, Boot screen

Text-based screen (OS console)
-
GUI-based screen (OS console)

Remote control
Remote reset
-
(via LAN)
power on-off/ dump

OS shutdown

Remote media (CD/DVD/FD)

Server Management Command Line
Protocol (DMTF compliant)

Remote control via Web browser
(without dedicated app)

Remote batch
1
Scheduling (without UPS)
1
Others
Set automatic IP address via DNS/DHCP

Remote wakeup
Wake On LAN

Centralized
management
Monitoring of multiple servers

Control of multiple servers
1
Industry standard
IPMI
2.0
2DianaScope is required.

CONFIGURATION GUIDE –NEC EXPRESS5800/R320b-M4 / Windows Server 2008 R2 model
NEC Corporation Revision 8.0, October 2012 16
Supported PCI Cards and Installable Slots
Part Number
Product Name
Slots
Notes
Slot # :
#1
#2
#3
#4
PCI Slot:
x4
x4
x4
x4
Card height:
LP
LP
FH
FH
Slot type:
x8
x8
x8
x8
N8804-009
1000BASE-T 2ch board kit




N8803-037
SAS Controller




Max. 1
N8803-038
Fibre Channel board kit
-
-



CONFIGURATION GUIDE –NEC EXPRESS5800/R320b-M4 / Windows Server 2008 R2 model
NEC Corporation Revision 8.0, October 2012 17
Notes for using Hyper-V
Brief system interruption during synchronization process
In the synchronization process of CPU modules, a memory copy is performed to duplex memory on both
CPU modules. Most of the memory area can be copied without interrupting the system through the
so-called brownout copy method, and just a small portion requires the system to stop. However with
Hyper-V, the system cannot use the brownout copy method. Therefore, the system does not respond for a
longer period of time during the synchronization process of the CPU modules than without Hyper-V.
See the table below for the reference values of interruption during re-synchronization of CPU/IO modules in
a Hyper-V system. It is recommended that your system design take the interruption into account.
Logical Main Memory Size
4GB
12GB
24GB
48GB
96GB
4 sec
8 sec
15 sec
29 sec
57 sec
About Guest OS
Guest operating systems supported on NEC Express5800/ft series are the same as other general purpose
servers. Refer to the Microsoft web site for Supported Guest Operating Systems on Hyper-V.
Backup
When using Hyper-V on a FT server, prepare a separate server for backup in the same way as for other
general purpose servers with Hyper-V. For backup patterns, refer to each backup software company's web
site.
NEC ESMPRO Agent
For monitoring guest operating systems, NEC ESMPRO Agent for Guest OS is required. Contact your
sales representative for this software.
Active Upgrade
Teams assigned to the virtual network by Hyper-V Virtual Network Manager cannot be used in Active
Upgrade. To use Active Upgrade, at least two teams are required.

CONFIGURATION GUIDE –NEC EXPRESS5800/R320b-M4 / Windows Server 2008 R2 model
NEC Corporation Revision 8.0, October 2012 18
Copyright Notice and Liability Disclaimer
The information contained herein is subject to change without notice.
Microsoft and Windows Server are either registered trademarks or trademarks of Microsoft Corporation in
the United States and/or other countries
Intel and Xeon are registered trademarks or trademarks of Intel Corporation or its subsidiaries in the United
States and other countries.
Linux is a trademark of Linus Torvalds.
Red Hat is a registered trademark of Red Hat, Inc. in the U.S.
All other products, brands, or trade names used in this document are trademarks or registered trademarks
of their respective holders.
NEC shall not be liable for technical or editorial errors or omissions contained herein.
For hard drive capacity measurements, 1 GB = 1 billion bytes. Actual formatted capacity is less.

CONFIGURATION GUIDE –NEC EXPRESS5800/R320b-M4 / Windows Server 2008 R2 model
NEC Corporation Revision 8.0, October 2012 19
Revision History
Revision
Date
Description
8.0
2012.10. 3
N8141-41F deleted (EOL)
N8141-59F 2U Tape Drive Enclosure added
N8151-77 (LTO4) deleted (EOL)
Backup software support matrix added
K410-119(1A) (cable for KVM switch cascading) added
Description of K410-168(02) corrected
7.2
2012.5.23
SCSI Controller and related products deleted (EOL)
17-inch LCD Console Drawer and KVM Switch Part Numbers changed
7.1
2012.4.23
Keyboard Part Number corrected
Mouse Part Number changed from N8170-22 to N8870-012
7.0
2011.11.25
Document form changed.
Memory P/N changed.
N8151-103 (LTO5) added in 8.6 External Tape Drives
6.0
2011.7.20
Memory description corrected.
N8870-010A is deleted. (EOL)
5.0
2011.4.15
Supported mouse added.
4.0
2010.11.29
FDD description removed because of EOL.
3.0
2010.11.1
Notes for using Hyper-V updated. (Non-responding time of R320a-E4 with
96GB memory)
2.0
2010.10.21
Memory capacity of R320a-E4 corrected.
1.0
2010.10.19
Initial release