Nemschoff Palisade 2.0 User manual

Tools Required
Parts Included
Nemscho Palisade 2.0
USB Charging Unit Installation Instructions
How to assemble USB charging unit
Step 1 Step 2
1.1 Slide the clip-on nuts in place. 2.1 Attach mounting plate to USB body.
UBI Hub Assembly
Mounting Plate Slip Clip
#6 Philips Flat
Head Screw
#8-32 Flat
Head Screw
#8 Screw
Class 2 Power Unit Power Unit Plug
Power Drive
Cable Clip
Wire Tie
Velcro
Cable Clamp
Slip Clip
Mounting Plate
Flat Head Screw
1Nemscho for Palisade 2.0 Assembly Instructions1BNVLY rev B

2Nemscho for Palisade 2.0 Assembly Instructions1BNVLY rev B
Step 3
Step 5
Step 4
3.1 Mount USB to seating unit.
5.1 Plug the cords as shown below.
4.1 Transformer can be mounted with two pieces of peel and stick Velcro,
(depending where the outlet in the wall is located).
Step 6
6.1 Extra wire can be held in place with the cable clips.
UBI Hub Assembly
Velcro
Class 2 Power Unit
Power Unit
Plug
Cable Clip

3Nemscho for Palisade 2.0 Assembly Instructions1BNVLY rev B
If fastening to wood bottom surface:
Alternate methods for other products using this kit:
Step 7
7.1 Cord can be tied to one of the legs.
7.2 Twist wire ties around the cable and leg.
Wire Tie