NEO Coolcam NIP-MJPEG User manual

P2P IPCAM User Manual
NIP-MJPEG
All manuals and user guides at all-guides.com
all-guides.com

WWW.SZNEO.COM IPCAM User Manual
Page 2
IP camera User Manual
Our products penetrate the P2P technology, such as computer plug and play with
networking so it makes Telecom, China Netcom, 3G smooth exchange of visits, which
achieve Internet Interworking ideal target.
Note: The picture is for reference only.
1.Hardware Installation
●1.1 Open the package and take the ip cam and accessories out, First install the ipcam
wireless antenna
●1.2 Fix the ip camera, insert one end of the network cable to the camera tail Ethernet
card interface, on the other end of the RJ45 network interface connected to a router or
switch..
●1.3 The software of IP Camera support windows XP/Vista/windows7 etc. operation
system, Pls use the power adapter to connect the DC5V port on the back of the ip
camera. Plug the other end to an electrical outlet. Check the card's power indicator light
(yellow) and the network indicator (green) is working properly, the camera pan and tilt
rotate automatically..
2 .Software Installation
●2.1Please insert CD into your computer's CD-ROM driver, it will operate automatically, if
not, pls double click the “autorun.exe” ,the file can be opened.
Shenzhen NEO Electronics Co., Ltd
Tel: [phone] Fax: [phone]
All manuals and user guides at all-guides.com

WWW.SZNEO.COM IPCAM User Manual
Page 3
Click “search.exe”, Follow the tips，LAN tool is installed into the system and generated
on the desktop“IP Camera Search "
●2.2 Search the device and login
The LAN run search tools "IP Camera Search", the program will find the network
cameras and displays the search to the IP address, port number, the name. If WIFI
wireless connected, it will display the IP address of the wireless.As shown,
To select Basic information can change the parameters, click Set to save the changes
●and enter the IP address directly open the login authentication page (for example, enter:
http://192.168.1.222: 81 )to open the login screen as shown below shown,
Mouse over the icon will be prompted
1.Check the DHCP to obtain an IP
2.Manually rewrite the IP
parameters Port name
Shenzhen NEO Electronics Co., Ltd
Tel: [phone] Fax: [phone]
All manuals and user guides at all-guides.com

WWW.SZNEO.COM IPCAM User Manual
Page 4
●After entering the correct user name and password and click "OK" to open the monitor
screen click on the appropriate browser model.
default login user name：admin
.
the browser
Default password :none
Shenzhen NEO Electronics Co., Ltd
Tel: [phone] Fax: [phone]
Select the operting language
Download the plug-in and install
Click the login button
All manuals and user guides at all-guides.com

WWW.SZNEO.COM IPCAM User Manual
Page 5
●2.3 Wireless network settings
Tick in the " wireless LAN " behind . You want to connect to and select SSID , the input
selection SSID password , as shown below:
●2.4 DDNS settings
ipcam(DDNS built-in）no need settings
Select service providers: Please select a server of the service provider, such as：
dyndns.org、3322.org、9299.org
Application domain address: Fill in the user application domain address, as shown
below:(ooo01.3322.org)
User name and password: fill in the the DDNS account number and password, if you use
the ipcam domain name, you can find the username and password in the camera tab:
DDNS account and password.
Extranet landing camera simply in the browser address bar and transportation equipment
DDNS domain name address plus port number of the camera you can access the IP
camera !
3. Installation plug-and-play software
●Install the plug and play software DeviceClient ,After installed, the icon will display
on the screen, click to open it to view. Click ”Devices list” , Double-click search
camera ID Online to add LAN camera in the pop-up box click "Open search interface
Shenzhen NEO Electronics Co., Ltd
Tel: [phone] Fax: [phone]
1.Click the Seanch button
2 . Selected list router
3.Enter the key
All manuals and user guides at all-guides.com

WWW.SZNEO.COM IPCAM User Manual
Page 6
3.1 Add cameras
·Enter an ID number
·Dragged the device to display box after you type the ID ect.
1 . Fill device ID number
The factory default password: blank
The factory default user name :admin
2.Please drag cam into Display
Shenzhen NEO Electronics Co., Ltd
Tel: [phone] Fax: [phone]
All manuals and user guides at all-guides.com
all-guides.com

WWW.SZNEO.COM IPCAM User Manual
Page 7
·Now we can see it as below.
Note: The camera can be in the LAN or WAN, but it must be connected to the Internet !
3.2 Add camera in LAN
·Click "Device List " , the following dialog box :
Click on the list of devices
LAN equipment Click to open the search interface
External network equipment Click
the Add button
Shenzhen NEO Electronics Co., Ltd
Tel: [phone] Fax: [phone]
All manuals and user guides at all-guides.com

WWW.SZNEO.COM IPCAM User Manual
Page 8
3.2.1 Adding camera in LAN
·Double-click the camera ID search to add LANcamera after click "Open search
interface
Free device naming
1. Click search
2 .Double-click the camera IP
3. Click OK
The default user
name
Shenzhen NEO Electronics Co., Ltd
Tel: [phone] Fax: [phone]
All manuals and user guides at all-guides.com

WWW.SZNEO.COM IPCAM User Manual
Page 9
3.2.2 LAN equipment successfully added
·Turn off the window , return interface
Dragged into the display box
To add LAN equipment successfully close the window
Shenzhen NEO Electronics Co., Ltd
Tel: [phone] Fax: [phone]
All manuals and user guides at all-guides.com

WWW.SZNEO.COM IPCAM User Manual
Page 10
The monitor screen is displayed :
3.3 Add camera in WAN
·Click " Add " button , input the ID number of the device and related information ,
as shown below process :
1. Click on the list of devices
2. Enter the device name (optional fill )
3. Enter the user name
4. Fill in the device ID number 5. Complete click OK
Shenzhen NEO Electronics Co., Ltd
Tel: [phone] Fax: [phone]
All manuals and user guides at all-guides.com

WWW.SZNEO.COM IPCAM User Manual
Page 11
3.3.1 Remotely device is added successfully
View all video :
Add a good remote device table
6. Finally, close the window
Dragged into the display box
Shenzhen NEO Electronics Co., Ltd
Tel: [phone] Fax: [phone]
All manuals and user guides at all-guides.com
all-guides.com

WWW.SZNEO.COM IPCAM User Manual
Page 12
3.4 The interface function
3.4.1 PTZ control
( Note : This feature is available only with the head of effective models )
Description (from left to right) :
1. Up and down cruise
2. right and left cruise
3. Left reversed
4. Upside down
Click on the direction of the arrow ,
Camera pan and tilt will move accordingly
Up
Right
Left
Down
centered
Shenzhen NEO Electronics Co., Ltd
Tel: [phone] Fax: [phone]
All manuals and user guides at all-guides.com

WWW.SZNEO.COM IPCAM User Manual
Page 13
5. Alarm switch is closed
6. Alarm switch opens
3.4.2 Video control
Function Description：
1. On / Off monitor voice
2. On / Off intercom
3. Video
4. photo
5. Close the video window
6. Multi-device Centralized monitoring
Click screen button to select the picture displayed on the
same screen
Shenzhen NEO Electronics Co., Ltd
Tel: [phone] Fax: [phone]
All manuals and user guides at all-guides.com