Neo-Neon IRDIP-9007456-01D-13 User manual

7x10W 4IN1 Indoor Par Light
User Manual
Introduction
Welcome to use High Power 4IN1 Indoor LED PAR Light under Neo-Neon Brand, This fixture applies high power LED
technology and enjoys long life span. It can work in DMX, Manual, Auto, Sound and Linkable modes. It is also
user-friendly, which makes it suitable for all kinds of entertainment and decorative industries. The fixture
can be used as a single unit or a PAR Light Set (4 PCS or 4*N PCS)
Packing Listing
1. IRDIP-9007456-01D-13 7x10W 4IN1 Indoor Par Light -----One
2．User Manual ------------------------------------- One
3．Power Cable ----------------------------------------- One
4．DMX Cable -------------------------------------------- One
1/ 7

Specification
1．Voltage: 110V～240V/50～60Hz
2．Power Consumption：71W(max)
3．Light Source: 7 *10W 4IN1 LED
4．Working Modes：DMX，Auto，Manual，Sound，Master/Slave
5．Connector： DMX512(3 PINS XLR)
6．Weight： 2.1kg
7. Dimension：L150 X W213 X H203
Caution
zRead the user manual before use and follow the instruction
zPlease connect the fixture to the earth linked power supply and be sure that it is the same as the rating
voltage on the fixture
zThe fixture is pack without any spare part. Please contact the manufacturer when maintenance is needed.
zPlease note that the working temperature is between -20℃ and 40℃
zPlease contact the professional engineers for repair.
Addition: If the power sockets is not earth linked, please add the grounding connection to the housing of the
fixture, so as to avoid the damage from the accumulated static or charge.
PAR Light Setting
1．Five Working Modes ：
1 Auto— Run the internal program automatically
2、Manual——Run the program manually
3、Sound —— Run the internal program by sound
4、DMX512—— DMX control Mode
5、4 Channels Mode-—— Run under the control by
4-Channels controller
2. Key Pressing and Digital Tube Setting
2-1、 Operation Panel as Picture 2 shows
MENU UP DOWN ENTER Picture 3
Picture 2
2-2、Instruction on Digital Tube
As Picture Three shows, it shows in 4 Digits and 8 Segments format
2-3、Function Setting and Display Instruction
The fixture has memory function. After powered on to enter DMX mode, it shows “A001” at the first
time. In the following use, the fixture will enter the previous modes directly. Press the keys on the operation
panel to choose different working modes. Hereunder is the details.
“MENU”Button
Modes Tube
Display
“ENTER”
Button “UP”Button “DOWN”Button “ENTER”
Button
A.001-A.512
（DMX address
setting）
A.001-A.512
（DMX Address
Setting）
DMX Mode A***
Parameter
Modification
Par.0-Par.4
（Fixture
Par.4-Par.0
（Fixture
Save and Run
2/ 7

sequence Setting） sequence Setting）
AP01-AP04
(Mode Selection)
AP04-AP01
(Mode Selection)
Auto Mode AP** S.000-S.008
(Strobe Speed)
S.008-S.000
(Strobe Speed)
r.000-r.008
（Red）
r.008-r.000
（Red）
g.000-g.008
（Green）
g.008-g.000
（Green）
b.000-b.008
（Blue）
b.008-b.000
（Blue）
u.000-u.008
(White)
u.008-u.000
(White)
Manual
Mode coLo
F.000-F.008
(Strobe Speed)
F.008-F.000
(Strobe Speed)
Sound Mode Soun SP.01-SP.02
(Sound Mode)
SP.02-SP.01
(Sound Mode)
4 Channel
Control
Mode
4-CH Key Press doesn’t work in this mode
3．Function Instruction：
3-1、DMX Mode：when the fixture works as a single unit, please set Par.0 in the DMX working mode. When CH1=255、
CH5=1、CH6=2、CH7=3，CH8=4,it will switch to Obey4 control mode directly. When the fixtures works as a set, please
set Par. 1~4 and DMX address A001. If the fixture is set to Par.0 or other DMX address, the slave units will
work out of the way.
3-2、Auto Mode: There are 4 modes, which is AP01-AP04. Strobe speed can be set in each mode.
3-3、Manual Mode: Under this mode, RGB brightness and strobe speed can be set manually. r.000-r.008 refers
to the brightness of red color、g.000-g.008 refers to the brightness of green color、b.000-b.008 refers to the
brightness of blue color、u.000-u.008 refers to the brightness of white color. Strobe speed setting is the same
as 3-2.
3-4、Sound Mode: Adjust the sound sensitive to the most suitable place and inset two kinds of sound modes
3-5、Temperature Protection Mode: Press Menu Button and then Enter Button, it will show the temperature
of the light panel.
4．Single Par Light Usage and DMX Channel Instruction:
4-1、DMX Controller Connection:
第1个第n个
4-2、DMX Channel Instruction：
DMX
Channel
Function DMX512 Value Description
000～030 DMX Mode（CH2、CH3、CH4、CH5、CH6，CH7）
031～080 Color Shade ，（ CH2,CH3、CH4、CH5、CH6，CH7）
081～140 Color Auto Mix（CH3）
141～170 RGBW Auto Switch（CH3）
171～200 15 colors Auto Switch（CH3）
201～240 Color Shade Automatically（CH3）
CH1 Mode
241
255
241～245：Sound Mode 1
Dmx line
DMX512 Controller /
4- Channel Controller
Fixture
SignalPar Par.0
AC Power
100~240VAC
50/60Hz
Fixture
SignalPar Par.0
Pow
er
line
2/ 7

246～255：Sound Mode 2
000～015 Light Out
CH2 All Dimmer for
RGB 016～255 General Brightness：1%～100%
000～015 No Effect
CH3 Strobe/Fade
Adjustment 016～255 Strobe / fade Speed
CH4 Red Brightness
Adjustment
000～255 Red Brightness Adjustment 0%～100%.
CH5 Green Brightness
Adjustment
000～255 Green Brightness Adjustment 0%～100%.
CH6 Blue Brightness
Adjustment
000～255 Blue Brightness Adjustment 0%～100%.
CH7 White Brightness
Adjustment
000～255 White Brightness Adjustment 0%～100%.
四 Instruction on Par Light Set
5-1、Controlled By DMX Controller
5-1-1、Connection
AC Power
100~240VAC
50/60Hz
DMX512 Controller / 4
Channel Controller
5-1-2、Channel Listing
Light
1st Par Par.1 Dmx line
Light
2nd Par Par.2
Dmx line Power line
Light
3rd Par Par.3
Light
4th Par Par.4
Power line Power line Power line
Dmx line Dmx line
3/ 7

4/ 7
DMX
Channel
Function DMX512
Value
Description
Mode Selection 01 000～009 RGB Regulation，Channel : CH2～CH19
Mode Selection 02 010～029 Run Internal Program 01，Channel：CH3>15
Mode Selection 03 030～049 Run Internal Program 02，Channel ：CH3>15
Mode Selection 04 050～069 Run Internal Program 03，Channel ：CH3>15
Mode Selection 05 070～089 Run Internal Program 04，Channel ：CH3>15
Mode Selection 06 090～109 Run Internal Program 05，Channel ：CH3>15
Mode Selection 07 110～129 Run Internal Program 06，Channel ：CH3>15
Mode Selection 08 130～149 Run Internal Program 07，Channel ：CH3>15
Mode Selection 09 150～169 Run Internal Program 08，Channel ：CH3>15
Mode Selection 10 170～189 Run Internal Program 09，Channel ：CH3>15
Mode Selection 11 190～209 Run Internal Program 10，Channel ：CH3>15
Mode Selection 12 210～229 Run Internal Program 11，Channel ：CH3>15
Mode Selection 13 230～239 Run Internal Program 12，Channel ：CH3>15
240～245：Sound Mode 1
CH1
Mode Selection 14 240～255 246～255： Sound Mode 2
CH2 RGB All Dim 000～255 Brightness ：0%～100%，CH1<10 Valid
000～015 No Strobe，No Speed
CH3 Speed Selection 016～255 Strobe Speed Selection
CH4 Red LED Brightness
Adjustment
000～255 Par 1 Red LED Brightness 0%～100%.
CH5 Green LED Brightness
Adjustment
000～255 Par 1 Green LED Brightness 0%～100%.
CH6 Blue LED Brightness
Adjustment
000～255 Par 1 Blue LED Brightness 0%～100%.
CH7 White LED Brightness
Adjustment
000～255 Par 1WhiteLED Brightness 0%～100%.
CH8 Red LED Brightness
Adjustment
000～255 Par 2 Red LED Brightness 0%～100%.
CH9 Green LED Brightness
Adjustment
000～255 Par 2 Green LED Brightness 0%～100%.
CH10 Blue LED Brightness
Adjustment
000～255 Par 2 Blue LED Brightness 0%～100%.
CH11 White LED Brightness
Adjustment
000～255 Par 2 White LED Brightness 0%～100%.
CH12 Red LED Brightness
Adjustment
000～255 Par 3 Red LED Brightness 0%～100%.
CH13 Green LED Brightness
Adjustment
000～255 Par 3 Green LED Brightness 0%～100%.
CH14 Blue LED Brightness
Adjustment
000～255 Par 3 Blue LED Brightness 0%～100%.
CH15 White LED Brightness
Adjustment
000～255 Par 3 White LED Brightness 0%～100%.
CH16 Red LED Brightness
Adjustment
000～255 Par 4 Red LED Brightness 0%～100%.
CH17 Green LED Brightness
Adjustment
000～255 Par 4 Green LED Brightness 0%～100%.
CH18 Blue LED Brightness
Adjustment
000～255 Par 4 Blue LED Brightness 0%～100%.
CH19 White LED Brightness
Adjustment
000～255 Par 4 White LED Brightness 0%～100%.

Operation Instruction
1、Stand Alone Mode
1．Stand Alone Mode: Auto, manual and sound
2．Working Mode Setting：Press different button to enter different working mode
2、Master/ Slave Mode
1．Master/ Slave Mode: Auto, manual and sound mode and no need to use controller。
2．Working Mode Setting：Select one unit as the master(auto sound or manual)，set up DMX address A001 in
other units，and all lights light Sequence Par.0 at the same time.
Master/ Slave Mode
D
mx line
Power line
Light
SignalPar Par.0
A001
D
mx line
Power line
Light
SignalPar Par.0
A001
AC Power
100~240VAC
50/60Hz
Power line
Light
SignalPar Par.0
Host
3．Cable Connection in Master/Slave mode：Connect the DMX output of the master and the input of the first
slave unit with XLR-XLR cables, then connect the output of the first slave unit with the input of the second
unit, the rest may be deduced by analogy until all the slave units are connected.
4. Four Channel Control Mode：Set up 4-channel mode for all the Par Lights in the loop. Press Menu Button
until 4-CH is showed.
Note: If more than one piece master unit or DMX controller, 4-channel controller is connected, the slave
units may work out of the way
3、Master and Slave Working Mode for Par Light Set
1．Working Mode Setting：Set up the DMX address: A001 on all the Slave units and Par Light Sequence Par.1~4
Four pieces Par lights can form one set. Or the fixture can link with other products Neo-Neon produces so
as to get more abundant stage effect.
Fixture 1：IRDIP-9007426-00D-13（Single Unit 7x10W(4IN1)）、IRDIP-9028426-00D-13（Light Set 7x10W(4IN1)）
Fixture 2：IRDIP-4016126-00D-13（Single Unit 16x3W(RGBW)）、IRDIP-4064126-00D-13（Light Set 16x3W(RGBW)）
Fixture 3：IRDIP-2016126-00D-13（Single Unit 16x1W(RGBW)）、IRDIP-2064126-00D-13（Light Set 16x1W(RGBW)）
Fixture 4：IRDIP-9028444-00D-11（Double Light 7x10W(4IN1)）（For development ）
Fixture 5：IRDIP-4064164-00D-11（双灯 16x3W(RGBW)）（For development）
Fixture 6：IRDIP-2016124-00D-11（双灯 16x1W(RGBW)）（For development）
Fixture 7：IRDIP-9012426-00D-13（Epar-12x10W（4IN1）Par Light）
Installation
Hanging Or Level Installation
Please find the hole in the middle of the bracket and fix the light with the clamp through these holes before
hanging. You can use hanging cable as assistance. Make sure that the hanging cable can bear the weight which
is 10 times of the hanging subjects.
5/ 7

Trouble Shooting
Troubles Checking Item Trouble Shooting
The unit doesn’t
work
1.Check and see whether the input voltage is the
same as the rating voltage。
2.Make sure that the working environment is
suitable for the unit。
1.Make sure that the input voltage is the same
as the rating voltage。
2.Ensure the working environment。
LED isn’t bright
enough 1.Check the input voltage 1. Make sure that the input voltage is the same as the rating voltage。
The unit is not
controlled by the
DMX
1．Check the polarity of the DMX control signal
2．See whether the unit is working under DMX mode
3．Check whether there are two masters
1．Correct the polarity of the DMX signal。
2．Set up DMX working mode。
3．Select only one master in the loop。
Light set don’t
work rightly 1．Check the light sequence of every par light 1．Correct the light sequence。
The temperature
doesn’t show 1．Check the thermal IC on the LED panel 1．Change the thermal IC
6/ 7