Neolab NPR-R100 User manual
NPR-R100 User ManualNeoLAB Convergence Inc.
User Manual
NPR-R100
(Model Name: NPR-R100)
Version : 0.1
Revision Date : 2020-03-31
1. Introduction
NPR-R100 is a new accessory of Neo Smartpen that provides recording function for learning
and work. You don't have to have a smartphone to record, and if you want to listen to the
recorded voice at that time, you can immediately listen to it by tapping the handwritten part
without additional action. That is, it is possible to save time to listen to the important part
again.
2. Features
● New design
○It has a simple design so that you can record naturally.
○ The button is placed in an easy-to-use position.
● Easy UX
○ Connection: NEO SMARTPEN and NPR-R100 are connected automatically.
Just turn on and put them aside.
○ Record: Just press the record button to start recording immediately.
○ Playback: When you tap a handwritten part, the voice of the part is played.
● Main specifications
○ Up to 150 hours of recorded files can be saved.
○ Up to 10 hours of continuous recording is possible with a single charge.
○ The recording monitoring function allows you to listen to the sound quality
currently being recorded.
○ Slim 1.7cm thick and light weight 35g
NPR-R100 User ManualNeoLAB Convergence Inc.
3. In the box
● NPR-R100 x1
●Micro-USB Cable x1
● Neck Strap x1
● Paper Controller x1
● User Manual x1
4. Exterior diagram
5. How to use
● Turn on & Start recording
NPR-R100 User ManualNeoLAB Convergence Inc.
● Play & Turn off
6. Indicators
Status
Power/BT LED
REC/Play LED
Power ON
●On
Power OFF
●-●-●, ○ Off
Connection with pen
●On
Recording
●-○-●-○ Blinking
Playing
●-○-●-○ Blinking
Pause playback
●On
Low battery
●-●-●-● Blinking
Charging
●On
File transmission
●-○-●-○ Blinking
Low storage / Time information error
●-○-●-○ Blinking
Error occurred (reset required)
●-●-●-● Blinking
●-●-●-● Blinking
NPR-R100 User ManualNeoLAB Convergence Inc.
7. Product Specification
Model Name
NPR-R100
Storage
16GB (eMMC)
Ports
Ear jack 3.5Φ x 1, Micro-USB 2.0 x 1 (Charging & Data)
Speaker
1W x 1
Bluetooth
Bluetooth 4.2, BLE mode support
Frequency: 2,402~2,480 MHz
Tx Power: ≤3mW(4.77dBm)/MHz
Rx Sensitivity: -96.5dBm @ BLE
Power
Input Power: 5V, USB Micro B type
Battery: Li-polymer 3.7V/ 560mAh(Operation range:3.5 ~ 4.2V)
Operating time
10 hours of continuous use
Dimensions, Weight
95.7mm x 27.1mm x 17.1mm, ≤ 35g
Environment Specification
Operating Temperature: 10℃ ~ 35℃
Storage Temperature (~3 Months): -10℃ ~ 50℃
8. Precautions
● The NPR-R100's Bluetooth wireless connection works only with Neo Smartpen.
Wireless connection and operation with other devices does not work.
●When recording continuously for 2 hours or more, to reduce the risk of loss of the
recorded file, the recorded file is saved in two-hour increments (225,032 KB).
● Please do not add / modify / delete any files and folders arbitrarily in NPR-R100 via
PC. It may be the main cause of product malfunction.
● The NPR-R100 can be recorded independently without a Neo Smartpen connection,
but it is recommended to record while writing after connecting with a pen for
convenient recorded file browsing.
● If there is no operation for 15 minutes after power ON, power is automatically turned
off to save battery.
● When the storage space is over 80%, an LED display and a beep sound are played
every 10 minutes. Please use it after emptying the storage space.
● When the battery is below 20%, an LED indicator and a beep sound are played every
10 minutes. If it is below 5%, recording will not work, so please use it after charging.
9. Warranty
● Please contact the store where you purchased the product or NeoLAB Convergence
for customer service/support.
-FCC Information to User
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one of the following
measures:
·Reorient or relocate the receiving antenna.
·Increase the separation between the equipment and receiver.
·Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
·Consult the dealer or an experienced radio/TV technician for help.
-Caution
THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY
APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS COULD VOID
THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
-IMPORTANT NOTE : FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment.
This equipment should be installed and operated with a minimum distance of 0.5 centimeters
between the radiator and your body. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Table of contents
