Nero 5G Ozone Machine User manual

Nero 5G Ozone Machine
Product Code: 350051
OWNER’S MANUAL
Please read all of the information provided in this owner’s
manual before operating the new Nero 5G Ozone Machine.
Images in this manual are for illustrative purposes only.
Due to constant improvements, we advise that changes to the design, material,
specifications and product configuration may occur at any time without notice.

Index
3. Warnings
4. Specifications
5. Functions front view
6. Functions rear view
7. Operation
8. Maintenance
9. Troubleshooting

CAUTION
RISK OF ELECTRICAL
SHOCK DO NOT
OPEN
ATTENTION
CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO
NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVCE PERSONNEL.
This “bolt of lightning” indicates that uninsulated material
within your unit may cause an electrical shock. For the safety
of everyone, do not remove product covering.
3

INTRODUCTION
This Nero 5G Ozone Machine is an advanced and convenient contaminant
remediation product. High-powered oxidation in a compact, lightweight,
rugged and replugable ozone module New design. Utilizing controlled
corona discharge ozone technology developed specifically to reduce odors
and smoke in unoccupied spaces, ideal for hospitality and
office use and more!
Model: 350051
Rated Voltage: Europe AC 220-240V/50-60Hz
Power Consumption: 65W
Ceramic Plate Size(1plate): 95X50MM
Air Volume: Max 106CFM(3M3/min)
Active Oxygen(on) ：5.0 g/h
Sound Level(DB): 40 Db
Product size(mm): W220xH170xD160MM
Weight: 2.9Kgs(6.38Lbs)
4

Operating the Nero 5G Ozone Machine
(Front View)
Timer Control Knob Turn clockwise to set the
timer for timed operation up
to THREE hours.
Indicator Light Illuminates when unit is in operation.
5

(Back View)
Fuse Holder Houses removable fuse.
(Spare fuse included, 2 amp, 0.79
inch in length)
Power Cord 220~240 Volt grounded cord (unless
otherwise).
6

The Nero 5G Ozone Machine is designed to remove odors in unoccupied
spaces. The unit has a timer that will enable it to run for a maximum duration
of 3 hours. The timer will then shut the air purifier off. You should allow 40
minutes before returning to the treated area.
To operate the Nero 5G Ozone Machine:
Close off the desired area to be treated.
Remove all occupants and pets.
Position the unit as close as possible to the odor source.
In such environments as motels that have individual heating and
cooling systems, turn the fan on and set on re-circulate.
Set timer to desired time and leave the room.
Allow 40 minutes before re-entering the treated space.
Return to space & ventilation area.
7

When the Nero 5G Ozone Machine no longer produces enough ozone to be
effective, the ozone plates should be replaced.(Usually they should be
replaced after 6000 hours)
How to replace the ozone plate:
Turn off the local power supply.
Pull out the ozone plate module directly by hand.
Install new ozone plate module
(Be careful not to drop the plate module).
8

If you suspect a problem with your unit check the following:
1) Unit is plugged in properly.
2) It’s important that the Nero 5G Ozone Machine be properly
grounded to avoid potential shock.
3) Fuse is installed properly and in good condition. To replace fuse,
pull out the plastic fuse holder, remove old fuse and insert new fuse.
Replacement fuse must be 2 amp (0.79 inch). Refer to picture as
follows:
Backed by the Nero 1 Year Warranty
Imported By:
R Weatherdon & Co Pty Ltd
www.weatherdon.com.au
Made in China
9