Nesco NC-58900 FOODPRO1 User manual
Instruction Manual
คู่มือการใช้งาน
FOOD PROCESSOR
MODEL : NC-58900 FOODPRO1
500 W 220-240 V 50/60 Hz
1
2
3
4
5
6
7
8
9
11
English
Dear Customer
Thank you for choosing a NESCO appliance. The experience, design, feature
and technology of this appliance, as well as the strict quality controls used during
manufacture, will provide full satisfaction for many years.
Introduction
Carefully read and understand this manual and any label attached to the tool
before use. Keep these instructions with the product for future reference. Ensure
all persons who use and service this product are acquainted with this manual.
A.
B.
C.
D.
E.
F.
G.
H.
I.
J.
K.
L.
M.
N.
O.
P.
Q.
R.
S.
T.
Motor Base
Driver
Processing Bowl
Blade Adapter
Bowl Cover
Pusher
Blade Holder
Slicing Blade
Coarse shredding Blade
Fine shredding Blade
Chopper
Kneading Blade
Emulsifying Disc
Citrus Juicing Plate
Citrus Juicing Head
Blender Measuring Cup
Blender Jar Cover
Blender Jar
Blender Blade
Transmission Head
12
When using electrical appliances, basic safety precaution must always be
followed:
1.Carefully read all instructions before operating and save for future reference.
2.This appliance is for normal household use only.
3.This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
4.Young children must be supervised to ensure that they do not play with the
appliance.
5.If the supply cord is damaged, it must be replaced before further use by the
manufacturer, its service agent or similarly qualied persons in order to avoid
a hazard.
6.This appliance includes a safety switch which prevents operation unless the
accessories are securely installed.
7.This appliance incorporates a protective device against high temperatures.
If the temperature becomes too high, the unit will turn off automatically and
will resume operation when the motor has cooled sufciently (after about 15
minutes).
8.Do NOT operate the appliance for more than a minute at a stretch.
9.If operation is not nished within 1 minute, turn off the machine and let it cool
for 10 minutes before the next round of operation. If more than 5 rounds of
operation are required, cool the machine for 90 minutes to room temperature
before the next 5 rounds. This can lengthen lifespan of the machine.
10.The temperature of accessible surfaces may be high when the appliance
is operating.
11.To protect against risk of electric shock, re or personal injury, do not
immerse power cord, plug or motor base in water or any form of liquid.
12.Unplug when it is not in use and before cleaning.
13.Do not immerse Motor Base in water, neither rinse it under tap water.
14.Do not push food with ngers, or other objects (like knives), always use the
enclosed pusher for feeding food.
15.Be extremely careful when handling blades and inserts, especially while
assembling and disassembling, and cleaning after use. Blades are very sharp.
16.Do not let power cord hang over the edge of a table or counter, or touch
any hot surface.
17.Do not place the appliance near a gas outlet, electric burner, or heated
oven.
18.Please wait till all the components stop running before unplugging the
power cord and taking off the processing bowl.
19.
Ensure the capacities shown in the Specications section are not
exceeded.
20.Always use a reliable earthed power supply to operate the appliance.
21.The appliances are not intended to be operated by means of an external
timer or separate remote-control system.
13
Processed Food Measurement Per
per batchFood
Chocolate ≤100g
Cheese ≤200g
meat ≤500g
Tea or Spice 50~100g
Fruit & Vegetable 100~300g
Onion ≤500g
SPECIFICATIONS
Capacity: 1.8L blender jar
1.2L bowl capacity for liquids
2L bowl capacity for dry items
After unpacking, disassemble unit before using for the rst time. Refer to
“HOW TO DISASSEMBLE” for directions.
Wash all parts except motor base in warm, soapy water. Rinse and dry
immediately. DO NOT IMMERSE MOTOR BASE IN WATER.
ASSEMBLY
Chopper Assembly
1.Position Driver on motor base.
2.Position processing bowl into the Driver and turn clockwise to seat rmly on
motor base.
3.Place blade adaptor onto the Driver.
4.Place chopper onto the blade adaptor.
5.Turn the chopper to the right position.
6.Place cover on bowl, turn clockwise until cover interlocks on bowl.
7.Place pusher into feeding chute.
Notes (Chopper) :
-Always keep the chopper inside the bowl before feeding food.
-Use pulse function for several times to avoid cutting too ne. Do not run for too
long while cutting hard cheese or chocolate. Otherwise these materials will
overheat and begin to melt.
-Standard chopping period: 30-60 sec.
14
Emulsifying Disc Assembly
1.Position Driver on motor base.
2.Position processing bowl into the Driver and turn clockwise to seat rmly on
motor base.
3.Place blade adaptor onto the Driver.
4.Place Emulsifying Disc onto the blade adaptor.
5.Turn the Emulsifying Disc to the right position.
6.Place cover on bowl, turn clockwise until cover locks on bowl.
7.Place pusher into feeding chute.
Notes (Emulsifying Disc):
-Emulsifying Disc can be used to mix cheese and egg, to make mayonnaise
and pudding rapidly.
-Do not use Emulsifying Disc to knead our.
Slicing & Shredding Blade Assembly
1. Position Driver on motor base.
2. Position processing bowl into the Driver
and turn clockwise to seat rmly on motor base.
3. Install desired blade onto the disc holder.
4. Place blade holder onto the Driver.
5. Place cover on bowl.
6. Turn cover clockwise until cover interlocks on bowl.
7. Put food into the feeding chute.
Processed Food Time per batchMeasurement per batch
Egg 2~5 pcs 30~70 sec
Cheese 125~350 ml 20 sec
15
Notes:
-Choose desired blade according to the processed food and desired shape
of food.
-Push softly when feeding food.
-Pre-cutting food into smaller pieces according to the diameter of feeding
tube.
Feed gradually for better effect. When cutting soft food, choose lower speed
to avoid the food turning soupy. If large quantity food needs to be cut, please
cut it for several batches.
-1200 ml for one batch.
Citrus Juicer Assembly
1.Position Driver on motor base.
2.Position processing bowl into the Driver and turn clockwise to seat rmly on
motor base.
3.Place citrus juicing plate on the bowl and turn 30 degrees clockwise.
Notes (Citrus Juicer) :
-Lower speed should be chosen for citrus juicer.
Blender Assembly
1.Make sure the blade base is xed tightly.
2.Put food into the jar.
3.Install measuring cup and cover properly.
4.Put blender jar onto motor base vertically, and then rotate the jar clockwise
to x it.
16
Kneading Blade Assembly
1.Position Driver on motor base.
2.Position processing bowl into the Driver and turn clockwise to seat rmly on
motor base.
3.Place blade adaptor onto the Driver.
4.Place kneading blade onto the blade adaptor.
5.Turn the kneading blade to the right position.
6.Place cover on bowl, turn clockwise until cover interlocks on bowl.
7.Place pusher into feeding chute
Notes (Kneading Disc):
-Always attach kneading disc in the bowl before feeding food.
-Standard kneading period: 20 sec.
Tips and Warning
Choose PULSE function for pre-mixing is recommended before operation.
1800ML for one batch.
Make sure the blade base is installed properly before operation.
Measuring cup can be used to add ingredients during operation.
How to Disassemble
1.Remove pusher. Turn cover counterclockwise, lift and remove.
2.Lift blade holder from driver.
3.Lift blade and remove from blade holder.
4.Turn bowl counterclockwise to unlock from motor base. Lift and remove.
CLEANING :
Wash all parts except motor base in warm, soapy water. The blades & discs
can be disassembled to wash with water, but be careful during disassembly.
DO NOT IMMERSE MOTOR BASE IN WATER.
Processed Food Measurement per batch
Flour / Soft Cheese ≤300g
Egg ≤5pieces
17
-Warranty only in service area.
-This instruction may be changed with out prior notice.
-Company reserved the right to change all details before notice.
-Damage or defect from misunderstand how to use or service from non
authorized people.
-Damage or defect from not follow this instruction manual.
-Electrical shock or any electrical problem.
-Lost or damage some part by accident or natural damage.
-Some parts are shelf life, need replacement.
Warranty motor only
-Damage or defective from manufacturer, dealer & service.
-1 year warranty for house hold use only.
-Use according to this instruction carefully.
Problem Solution
Machine does not work.
Machine stops running suddenly.
Motor is running, while components do not run.
Ensure correct assembly.
Make sure power plug is plugged in properly.
Check if the mains have tripped, or if there is a
power outage.
Processing bowl may loosen during vigorous
processing. Please re-install the bowl cover.
Make sure the Driver is installed correctly.
18
บริษัท เนสโก้ กรุ๊ป จำ�กัด 46/178 ชั้น 3 หมู่ 12 ถนนนวลจันทร์ แขวงคลองกุ่ม
เขตบึงกุ่ม กรุงเทพๆ 10230 โทรศัพท์ 0-2363-7757-62 แฟ็กซ์ 0-2363-7763
Nesco Group Co.,Ltd. 46/178 3 Floor Moo 12 Nuanchan Rd. Klongkum
Buengkum Bangkok Thailand 10230 Tel 0-2363-7757-62 Fax 0-2363-7763
www.nescoproduct.com
rd
Table of contents
Languages:
Other Nesco Food Processor manuals
