Nespresso Evoluo User manual

1
DESCALING
GUIDE

2
IMPORTANT INFORMATION
BEFORE YOU BEGIN
Nespresso recommends descaling every 3 months or 300 capsules (whichever comes first).
(such as vinegar or store-bought descalers) may cause damage to your Nespresso machine.
In case of contact with eyes, rinse immediately with plenty of water
for 15 minutes and seek medical advice.
Avoid filling up the water tank during the descaling process.
After descaling, wipe down the machine with a damp cloth.
Nespresso machines should be descaled with a Nespresso Descaling Kit which contains
a natural solution that thoroughly dissolves the scale build up. Other solutions
Descaling solution can damage or discolor surfaces so we suggest placing something
underneath your machine in case a spill should occur. If a spill does occur, please make sure
to clean up the solution immediately to avoid any damage.
Keep descaling solution out of reach of children.
The descaling solution may be irritating to the eyes and skin.
Do not swallow or ingest the descaling solution.

3
E V O L U O

STEP 1 STEP 2 STEP 3
STEP 4
STEP 7
STEP 5
STEP 8
STEP 6
STEP 9
4
E V O L U O
Duration: 20 minutes
Press and hold button until you
see steady light turn off first, and
then start blinking quickly. It may
take approximately 7 seconds
before light starts to blink.
Turn lever to the left to lock the
lever, then turn lever back to the
front to unlock the lever.
Place 20 oz. receptacle
underneath spout. Press and
release button once to begin
descaling. Light will
continuously blink throughout
the process. Machine will
dispense solution intermittently.
With machine plugged in, empty
the capsule container and drip
tray and place back onto the
machine.
Fill water tank with 1 packet of
descaling solution and 1/2 tankof
water.
Once the solution has finished
running through, machine should
be silent. Discard the solution
and return the empty receptacle
underneath the coffee spout.
Leave the lever in the unlocked
position. Press and release button
once and wait for steady light.
Press and hold the button until
the light turns off and then starts
blinking quickly again. Steps 5
and 6must be completed
within 45 seconds.
Lock the lever. The light should
still be blinking fast. This is an
indication that you have entered
descaling mode. If not, start over
from Step 3.

STEP 10 STEP 11 STEP 12
STEP 13 STEP 14 STEP 15
5
E V O L U O
Rinse water tank. Refill with ⅔
fresh water and place back on
the machine. Press and release
button to start the rinsing
process.
Once the water tank is empty,
press and hold the button until
the blinking light becomes
steady. This may take
approximately 7 seconds.
Refll the water tank and place it
back onto the machine.
The machine will stop making
noise once the water tank is
completely empty. Discard the
water from the receptacle.
Empty and rinse the capsule
container and drip tray and
reinsert.
Wipe down the machine with a
damp cloth. Let the machine rest
for 10 minutes. The machine is
now ready for use.