Nesuniq IPC-SD05W Manual

Make safety 360° visiable
we offer a full-line affordable PTZ camera for home and small business.
2019/08/29
Version 1.00
Nesuniq PTZ Camera
Quick start user manual
WiFi series
Visit to access step
by step YouTube video tutorials for setting up Nesuniq wireless PTZ Camera
https://www.youtube.com/channel/UCwu0MqYNntltMOluGCK6ywQ
IPC-SD05W
IPC-SD05B
1
www.nesuniq.com
IPC-SD06W
IPC-SD06B

NOTICE:
For better testing of this product, please use the
power supply that comes with the camera, and do not use any
power extension cable over 15ft(5m). Please test for both day
and night vision locally before installation.
1. Product Introduction
This is a wireless pan tilt zoom camera, but it supports both wired and wifi
connection, support 2.4G only not for 5G. If the distance between camera
and router is over 50 meter, we suggest using wired connection.
This is an HD IP camera for monitoring. It connects to the Internet
to send and receive data, you can use it to remotely view real-time
images from your mobile phone, computer or other devices anytime
and anywhere, it can save surveillance videos in the Micro SD card,
computer or other devices, the camera also supports alarm
functions such as sending alarm emails, alarming phone message
push, and other functions.
①IP Camera
②Power adapter
③User manual
④Network cable
⑤WIFI Antenna
⑥Screws bag
Package
2
www.nesuniq.com

Power to the camera and leave
the LAN port empty, it will take
one minute for camera to make
the self-checking by rotating.
Interface
Reset Button
Power Port
RJ45 Port
2. Camera Connection
Adapter
DC12V
After the self-testing, the camera will turn on its wifi signal, called AP spot.the name is
IPCAM-XXXXXX, X refers a string of numbers.
3
www.nesuniq.com

3. View via Smartphone/Tablet
Step 1: Free APP Installation
Download and install free APP "Camhi" from Google Play or Apple
App Store or scan the QR code below to get APP information.
Android IOS
Step 2: Connect to camera's AP Spot
After power to camera, it will create a wireless signal named
IPCAM-XXXXX. connect to your smartphone, the password is
01234567
Step 3: Run APP "Camhi" & Add Camera to "Camhi"
Note: you can find UID number on
the label that sticks on the camera
and on the box
4
www.nesuniq.com
1. Click to add camera
2. Input camera's UID number

After inputting the UID, press "√" in the top right corner, several seconds later, add camera successful.
Until now, we have added the camera to the APP, cause we
use the AP spot for the connection. If we want to remote
view or remote control at any time anywhere, we must go to
finish step 4.
5
www.nesuniq.com
Also, you can scan the QR code to add camera quickly

Step 4: Wi-Fi Setting
Click the setting button beside the online camera, find Wi-Fi Setting option, click it. connect to
your home router by typing the password of your router.
4. Set Micro SD Card
At the back of the camera, there are two screw ports. Open it and you can insert your memory card.
watch video
6
www.nesuniq.com
1. Click it and find the
Wi-Fi setting option
2. Click to connet to
your home router
Click "Device Information", you can get the
IP address of this wireless PTZ camera

Connect LAN cable to router
5. View via PC
Install the "Search Tool" that comes with the product, run it to find the IP address of this camera.
Also, you can get the IP address on Camhi APP by clicking the "Device Information".
Step 1: "Search Tool" Installation
1. Click "Refresh" to find
the camera's IP address.
2. Type this IP address to the
"Internet Explorer" to visit the camera
on your computer.
Adapter
DC12V
and power to the camera.
Both the RJ45 port and Power port should be connected, and both the
camera and PC should be connected to the same router.
(go back to "View via Smartphone/PC part and "Step 4"
Connect to router
7
www.nesuniq.com

Default user name
admin
Default password
admin
Click "Next"can modify network parameters of the camera if you need to change
them(for advanced users)
Step 2: Visit Camera on PC
Visit the camera through IE browser by input the IP address on Windows PC. Here take
192.168.1.18 for example.
In the browser, you can view the image and configure all parameters of the camera.
We highly recommend using the "Internet Explorer" browser.
8
www.nesuniq.com

Step 3: Set Wi-Fi
After finishing the wifi setting, you can remove the LAN cable and visit this camera on your PC
Even though this camera does not connect to the router through the ethernet cable.
6. View via "CMS"
Connect and manage the multiple cameras via CMS on windows PC. CMS stands for "Client
Management Software", it can manage many ip cameras together, if you have many security
cameras to manage, then it would be a good choice.
When using CMS, please make sure that you have completed the WiFi settings. If not, please
follow the connection method below.
Adapter
DC12V
Connect to router
9
www.nesuniq.com
1. Click "Wireless" page
2. Select your wifi
3. Your wifi password
4. WiFi test
5. Save settings
Connect between the
router and LAN port

Step 1: "CMS" Installation
Step 2: Add camera to CMS
Follow these orders to add camera to the software: Add Area →Searh →add
10
www.nesuniq.com
Click to login in
default password is empty
1. Add Area to Region
you can name one as you like.
2. Click to search the
camera that need to add

11
www.nesuniq.com
3. Pick the camera and
add to the area that you created.
Double click and done

7. Reboot & Restore Factory Setting
Reboot: Reconnect the power to restart the camera
Restore: Press and hold the reset button for 15 seconds and the camera
will restore to factory setting.
Also you can visit the camera on PC and do the reboot and restore there
12
www.nesuniq.com

③MicroCardQuickSetup
②QuickSetupforiPhone
Reboot & Restore on smartphone
8. YouTube Video
13
www.nesuniq.com
①QuickSetupforAndroidSmartphone
④MotionDetection&EmailAlarmQuickSetup