NetComm NP920 User manual

NetCommWireless
QUICK START GUIDE
NetComm
Wireless
NP920
N600 Dual Band WiFi USB Adapter

NetComm
Wireless
THANKS FOR PURCHASING
NETCOMM WIRELESS
This quick start guide is designed to get you up and running quickly with your new router.
More advanced set up instructions can be found in the user manual which can be downloaded
from www.netcommwireless.com
ATTACHING YOUR USB ADAPTER
Insert your N600 Dual Band WiFi USB Adapter into a spare USB port of your laptop or
desktop computer.
CONNECTING TO YOUR WIFI NETWORK
1. Click on the Wireless Zero Conguration icon down the bottom right of your
screen. This will display all of the available WiFi networks that you can connect to.
2. Select your WiFi network and when prompted, enter the password for that network.
3. Allow approximately 1 minute for the adapter to recognise your settings. When complete,
you will be able to access the Internet over your selected WiFi network.

N600 Dual Band WiFi USB Adapter - NP920
TROUBLESHOOTING
YOUR COMPUTER DOES NOT DETECT YOUR USB ADAPTER
You may need to install a driver onto your computer to allow your USB Adapter to operate.
Please visit the Downloads section of the product page on the NetComm Wireless website to
download. www.netcommwireless.com/product/wi/NP920
1. Download the appropriate zipped driver folder from the NetComm Wireless website to
your computer.
2. Right click on the folder and select the Extract To option, choosing a location to extract
the les to.
3. Open Device Manager (Start > Control Panel > System > Hardware > Device Manager
> Network Adapters) and select the Broadcom 802.11n Wireless USB Adapter.
4. Select the Driver tab and press the Update Driver button.
5. Select the Browse my Computer for the Driver Software option from the Windows
Driver Update.
6. Browse to the folder you previously extracted and press the Open button. Windows
should detect the appropriate driver and install it.
7. Follow the onscreen instruction to complete the installation.
Note: This USB Adapter does not work with any Mac operating systems. All recent Macs have dual band WiFi built-in as a feature.
CANNOT ESTABLISH A WIFI CONNECTION
Ensure you are connecting to the correct WiFi network and that your WiFi router and WiFi
USB Adapter are using the same security settings.

NetComm
Wireless
QSG-00005 rev 2
WORKS WELL WITH
N900 DUAL BAND WIFI GIGABIT
ROUTER (NF2)
• Gigabit WAN port for Fibre connectivity
• 3 x Gigabit LAN ports
• Alternate Internet connection via a 3G/4G
USB modem
• Concurrent dual band WiFi up to 900Mbps
• Incorporates 2 x USB 2.0 ports. Connect
a 3G/4G USB modem and an external
hard disk drive for le sharing
• Supports next generation IPv6 addressing
N900 DUAL BAND WIFI GIGABIT
MODEM ROUTER (NF3ADV)
• ADSL2+ modem
• Gigabit WAN port for Fibre connectivity
• 3 x Gigabit LAN ports
• Alternate Internet connection via a 3G/4G
USB modem
• Concurrent dual band WiFi up to 900Mbps
• Incorporates 2 x USB 2.0 ports. Connect
a 3G/4G USB modem and an external
hard disk drive for le sharing
• Built-in DECT base station to make VoIP
phone calls
• Supports next generation IPv6 addressing
Dual Band WiFi creates two separate WiFi networks that can be dedicated to specic
applications around your home or ofce. Having separate networks will double your WiFi
bandwidth and speeds will be increased as there will be no interference between competing
WiFi frequencies.
The following NetComm Wireless products are recommended for use with your new N600
Dual Band WiFi USB Adapter.