NetComm V85 User manual

NetComm’s V85 VoIP Desktop Telephone is the ideal Internet device for any
small business or home user wanting to take advantage of the benefits of IP
Telephony services. The V85 is a fully-featured Digital IP telephone using the
popular Session Initiation Protocol (SIP) standard to deliver high-quality voice
calls over the Internet. When utilising a broadband Internet and VoIP service,
home users can take advantage of VoIP by plugging the V85 VoIP Desktop
Telephone directly into a broadband modem router.
Alternatively, a business can deploy VoIP by connecting the V85 Desktop
Phone into the LAN port of an Ethernet Network and use their existing
broadband/VoIP service to significantly reduce or eliminate long distance or
inter-office phone charges.
Adding to the V85’s elegant design are a host of handy features including
Full Duplex Speaker Phone with echo cancellation, speed dials, phone
book, call transfer, mute and a unique volume control for both the handset
speaker/microphone.
The V85 also features a dedicated PC port that can connect both the phone and
the computer to the network using only one network connection; eliminating the
need to install additional network wall points at each workstation.
NetComm has also made the set-up and configuration easy to achieve. By using
either a web browser or the phone’s dual row LCD and keypad, the initial set-up
or advanced features can be configured in minutes with a minimum of fuss.
The V85 supports a number of supplementary call services which are provided
by most VoIP service providers. These are Caller ID, Call On-Hold, Call Forward,
Call Waiting and Transfer to external number functions*.
* Supplementary features must be supported by your VoIP service provider.
SIP compatible (RFC-3261) Desktop Telephone
Full duplex hands free Speakerphone
Dual row LCD display for status and setup functions
10 speed dials and 50 number phonebook
Equipped with 729, 723 and 711 codecs
2-way volume control for handset speaker/microphone and voice loud speaker
Simple setup and configuration via keypad or web browser
Tactile KeypadSIP Full Duplex Speakerphone
V85 VoIP Desktop Telephone
SIP – Full Duplex Speakerphone

Internet
ADSL or Cable
Modem/Router
V85
LAN Port
Typical ADSL/Cable Modem configuration.
For other configurations, refer to User Guide.
PC Port
PC Port
LAN Port
Power
TECHNICAL SPECIFICATIONS
VoIP
• SIP (RFC3261)
• MD5 Authentication
• DTMF transfer: In-band, Out-band (RFC2833 and SIP Info)
• NAT Traversal Support using STUN, Port forwarding and
Outbound Proxy
VOICE
• Codecs: G.723.1 (6.3k/5.3k), G.729A/B, G.711 (A-law/U-law)
• Full duplex hands feee Speakerphone
• Echo Cancellation (G.168)
• VAD (Voice Activity Detection)
• CNG (Comfort Noise Generation)
• Direct IP dialing (no need for proxy server)
• Silence suppression
NETWORK SUPPORT
• Protocols: TCP/UDP/IP, RTP/RTCP, HTTP, ICMP, ARP, DNS,
DHCP client, NTP/SNTP, FTP, PPPoE
• Broadband connection: PPPoE client, DHCP client, Static IP
• Configuration: Keypad and LCD, Web browser
• Firmware upgrade: FTP
ETHERNET
• IEEE 802.3 10/100 BASE-T Ethernet, auto sense, auto crossing
• 1 x RJ-45 port to DSL/Cable modem/router
• 1 x RJ-45 port to PC or switch
KEY PAD
• Standard phone set keys
• 10 memory speed dial
• Up & Down LCD Menu navigation
• Menu/OK
• Cancel
• Text to number switch
• Transfer, Hold, Redial, louder speaker
• Handset Speaker/Louder Speaker/Ringer/Microphone
volume adjustment
TELEPHONE TONE
• DTMF
• Ring tone
• Ring back tone
• Dial tone
• Busy tone
• Choice of 10 ring tones
CALL MANAGEMENT
• Incoming call history
• Missed or not accepted call history
• Make direct calls from call history
LED INDICATORS
• Network connection
• Ethernet status
• Louder speaker
• Hold
• Incoming call notification
LCD DISPLAY
• 2x16 characters
SPEAKER
• 8 Ohm/0.2 Watt speaker for speakerphone operation
POWER INPUT
• 7V DC 800mA power adaptor
DIMENSIONS
• 170mm (W) x 220mm (D) x 60mm (H)
WEIGHT
• 730g
SAFETY/ EMI
• C-Tick
WORKING ENVIRONMENT
• Temperature: 0 ~ 40C° (32 ~ 104F°)
• Humidity: 10% ~ 95% (non-condensing)
MINIMUM SYSTEM REQUIREMENTS
• Account with a VoIP Service Provider
• Broadband service – ADSL or Cable
• (256Kbps download /128Kbps upload recommended)
• Broadband Modem/Router with spare Ethernet Port
• PC equipped with a Ethernet network interface and Web
• Browser (eg, Mozilla or Netcsape) for configuration only
PACKAGE CONTENTS
• V85 VoIP Desktop Handset
• 12V DC 300mA power supply
• RJ-45 10/100 Ethernet cable
• User Guide CD
• Package Contents List
• Quick Start Guide
V85 VoIP Desktop Telephone
SIP – Full Duplex Speakerphone
NETCOMM LIMITED ABN 85 002 490 486 PO Box 1200, Lane Cove NSW 2066 Australia
P: 02 9424 2070 F: 02 9424 2010 E: [email protected] W: www.netcomm.com.au
Trademarks and registered trademarks are the property of NetComm Limited or their respective owners. Specifications are
subject to change without notice. Images shown may vary slightly from the actual product.
Your NetComm dealer:
KEY FEATURES
SIP Compatible (RFC-3261) Desktop Telephone
Full duplex hands free Speakerphone
Dual row LCD display for status and setup functions
10 speed dials and 50 number phonebook
Equipped with 729, 723 and 711 codecs
2-way volume control for handset speaker/microphone
and voice loud speaker
Detailed Call Register for missed incoming and
outgoing calls
Supports supplementary call services (Call on hold,
forward or transfer – service provider dependent)
IP address assigning using PPPoE, DHCP or Static
DTMF Tone generation
Second Ethernet Port for connection to PC or LAN
Simple setup and configuration via telephone keypad or
web browser
3-YEAR WARRANTY WHEN YOU REGISTER ONLINE
1 year warranty out of the box. Extra 2 years FREE with
online registration at www.netcomm.com.au
(Conditional upon online registration)