NETGEAR WNCE2001 - Ethernet to Wireless Adapter Operation manual

Connect any device with a network port to your existing home wireless network
• Wirelessly connects networked home theater devices such as Xbox 360®, PS3™, TiVo®,
VUDU, Blu-ray player, and Internet TVs to your home network.
• Universal—works with any network enabled device. No need to buy a Wi-Fi adapter that
only works with one type of device
• Powered by any USB port, avoids an additional power outlet
• Avoid long stringing cables. Freedom to place your home entertainment center anywhere
and still connect to the Internet
• Compact design provides space-saving placement on your HDTV1
• Push ‘N’ Connect secures connection to the existing network at a push of a button,
true plug-and-play
2.4 GHz
N300
STEP 2
Push the Push ‘N’ Connect
button on your router
STEP 1
Push the Push ‘N’ Connect
button on the adapter
STEP 3
Connect
securely
Universal WiFi Internet Adapter
WNCE2001 Data Sheet
24/7
T E C H N I C A L
SUPPORT*1-888-NETGEAR (638-4327)
Email: [email protected]
The NETGEAR Difference
WNCE2001
Universal compatibility
CD-less, wireless installation
Push ‘N’ Connect
Powered by USB port
Internet connected
Blu-ray player
Internet connected
DVR
OR
OR
OR
Game
console
Internet enabled
HDTV
Home
Theater
Devices
Ethernet Port
Power
Wi-Fi connection
indicator
Ethernet
connection
indicator
Power
(USB port or wall plug) Push ‘N’ Connect
1For best performance place adapter in front or to side of television.

350 E. Plumeria Drive
San Jose, CA 95134-1911
1-888-NETGEAR (638-4327)
E-mail: [e-mail]
www.NETGEAR.com
© 2010 NETGEAR, Inc. NETGEAR, the NETGEAR Logo, and Connect with Innovation are trademarks and/or registered trademarks of
NETGEAR, Inc. and/or subsidiaries in the United States and/or other countries. Mac and the Mac logo are trademarks of Apple Inc., regis-
tered in the U.S. and other countries. Other brand names mentioned herein are for identification purposes only and may be trademarks of
their respective holder(s). Information is subject to change without notice. All rights reserved.
This product is packaged with a limited warranty, the acceptance of which is a condition of sale.
*Basic technical support provided for 90 days from date of purchase.
†Maximum wireless signal rate derived from IEEE standard 802.11 specifications. Actual data throughput will vary. Network conditions and
environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data
throughput rate. NETGEAR makes no express or implied representations or warranties about this product’s compatibility with any future
standards.
‡“N”, “Wireless-N” and “802.11n” refer to compliance with IEEE 802.11n specification version 2.0 only.
D-WNCE2001-2
System Requirements
• Existing wireless home network with Internet
connection
– 2.4 GHz 802.11 b/g/n AP/gateway/router
• TV, DVR, game console or home A/V device with
Ethernet port
• Optional — USB port on A/V device to power
• Microsoft® Internet Explorer® 5.0, Firefox® 2.0 or
Safari 1.4 or higher for configuration
Features
• Connects to any existing 2.4 Ghz Wi-Fi access
point, gateway or router
• Push ‘N’ Connect using Wi-Fi Protected Setup®
for easy setup
• Dynamic LEDs display real-time network
connection status
• Wi-Fi Protected Access® (WPA2-PSK, WPA-PSK)
and WEP
• One (1) Ethernet port to connect to home A/V
devices
Standards
• IEEE 802.11n version 2.0 at 2.4 GHz
Physical Specifications
• Dimensions: 81.3 x 62 x 17.9mm
(3.20 x 2.44 x .70 in)
• Weight: 60 g (2.12 oz)
Package Contents
• Universal WiFi Internet Adapter (WNCE2001)
• Ethernet cable
• USB power cable
• Power adapter, localized to country of sale
Warranty
• Localized to country of sale
Universal WiFi Internet Adapter WNCE2001
Learn more at www.netgear.com/connectWiFi