NETGEAR Arlo Baby User manual

Arlo Baby
Quick Start Guide

Welcome
Thank you for choosing Arlo Baby.
Getting started is easy.
What’s Included
Arlo Baby
camera
USB power
cable
USB power
adapter
Mounting
screws
Wall-mount
plate
Quick Start Guide

5
4
Plug In Your Camera Get the App
Connect one end of the USB power cable to the port on the
camera.
Caution: You must use an Arlo Baby power cable and adapter
to charge the camera battery. Do not try to power the camera
or charge the camera battery with any power adapter other
than the one provided with the Arlo Baby camera.
Plug the other end of the USB cable into the power adapter.
Plug the USB power adapter into a wall socket and wait for the
camera LED to blink amber.
For the best experience, download the Arlo app for your
smartphone by scanning this QR code or searching for Arlo in the
app store.
Note: If you already use the Arlo app, make sure that you
are using the latest version. To find out if an update is
available, go to the app store and search for Arlo.
arlo.netgear.com

7
6
Get a New Account or Log In
¾To create a new Arlo account:
1. Launch the Arlo app from your smartphone,
tap New to Arlo?, and select Arlo Baby.
If you are using a computer, visit
arlo.netgear.com.
2. Follow the onscreen instructions.
¾To add an Arlo Baby camera to an
existing Arlo account:
1. If you already set up an Arlo account, log in
and click or tap Add Device.
2. Follow the onscreen instructions.
Connect Your Camera
Follow the onscreen instructions either in the Arlo app or from a
computer to connect your camera to your router.
Note: If you own an Arlo Wire-Free system, do not connect your
Arlo Baby camera to the Arlo base station.

9
8
Place Your Camera
If you are mounting the camera on a wall, place the wall plate
and secure it with the included screws.
Align the wall plate with the holes on the base of the camera
and rotate the base until it snaps into place.
You can place your camera on a shelf or other flat surface, or
you can mount it on the wall.
Note: Do not cover or obstruct the inlet holes for the sensors.
STRANGULATION HAZARD – Children have STRANGLED
in cords. Keep cord out of the reach of children (more
than 3ft (.9m) away).

11
10
You’re Done!
Congratulations! Your Arlo Baby camera is set up and ready
to go.
To view useful tutorial videos, find troubleshooting tips, or get
support, visit support.arlo.com.
Use Arlo Baby’s tilt and swivel functions to position the camera
so that it captures the area that you want to monitor.

13
12
Arlo Baby Features
¾Night Light
Use the app or the top
button on the right side of
the camera to turn the night
light on and o.
¾Rechargeable Battery
Your Arlo Baby camera includes a built-in rechargeable
battery and can work for several hours at a time without
being plugged in. You can place the camera in locations
where you cannot connect it to a power outlet.
Use the switch on the bottom
of the camera to power the Arlo
Baby camera’s battery o. The
camera’s battery is on when the
green color is visible.
If the camera is unplugged and you don’t want the battery
to lose its charge, set the switch to o.
O
On
¾Music
Use the app or the bottom
button on the right side
of the camera to play and
pause music.

15
14
Camera LED Guide
Arlo Baby Characters
• Pull the character ears
up to remove them.
• To install character
ears, align the ears
with the camera lens
and press them onto
the camera.
• Rotate the character
feet and pull them o
to remove them.
• To install character
feet, align the foot
plate with the holes
on the bottom of the
camera and rotate
the foot plate until it
clicks into place.
Arlo Baby cameras come with a bunny character set. You can
remove the bunny character set and replace it with other Arlo
Baby characters.
Solid blue
The camera is
powered on and is
connected to the
Internet.
Fast blinking
amber
The camera is not
connected to a
WiFi network.
Solid amber
The camera is
booting.
O
The camera is
powered o.
Solid purple
The camera is
connected to a WiFi
network. However, it
is not connected to
the Internet.
Blinking purple
The camera is too
far away from the
router.
Blinking blue and
amber
A firmware update
is in progress. DO
NOT TURN OFF THE
CAMERA.
Double blink
amber every 10
seconds
The camera battery
charge is low.
Fast blinking
blue
The camera is
connecting to the
Internet.
Fast blinking
blue for three
seconds
The camera was
connected to a
charger.

©NETGEAR, Inc., NETGEAR, the NETGEAR Logo, and Arlo are trademarks of
NETGEAR, Inc.
Compliance
For the current EU Declaration of Conformity, visit
kb.netgear.com/app/answers/detail/a_id/11621/.
For regulatory compliance information, visit
netgear.com/about/regulatory/.
350 East Plumeria Drive
San Jose, CA 95134, USA
April 2017
NETGEAR INTL LTD
Building 3, University Technology Centre
Curraheen Road, Cork, Ireland