netta 103773 User manual

10.8V HEDGE
TRIMMER
---------------------------------------------------------------------------------------------------
EN USER INSTRUCTION & OPERATION MANUAL
ES MANUAL DE INSTRUCCIONES Y OPERACIONES PARA EL
USUARIO
DE BENUTZERANLEITUNG & BETRIEBSANLEITUNG
FR MANUEL D'UTILISATION ET D'UTILISATION
IT ISTRUZIONI PER L'USO E MANUALE OPERATIVO
BLADE LENGTH
350mm
RATED POWER
10.8V
CHARGE TIME
Around 4 hours
BLADE
STROKES
1200/MIN
EN

Thank you for purchasing this NETTA product.
Please read the user manual carefully before operating this appliance.
We will update our instruction manuals if necessary.
For the most up-to-date user manual, please visit our official website:
www.nettadirect.com.
You can download a copy of up to date user manuals at any time in
electronic format. We do not supply you with a paper-based user
manual after each revision.
Require a larger version of this
Instruction Manual?
Please download electronically from
our website and use PDF reader on
your device to enlarge the text if
needed.
www.nettadirect.com

SAFETY & WARNINGS...
INTENDED USE
Your hedge trimmer has been designed for
trimming hedges, shrubs and brambles and
should not be used for any other purpose.
This tool is intended for consumer use
only.
Your charger has been designed for
charging batteries of the type supplied with
this tool. DO NOT USE TO CHARGE
OTHER BATTERIES.
REGULAR CHECKUPS
•Check cables every time
before plugging into a
socket, make sure power
cables are not burst or
snapped and that the power-
plug has no damage.
•Check all the knobs are
functioning correctly.
GENERAL CAUTIONS
•Always follow this instruction manual and go through all the safety
checks.
•This is not toy - do not let children play with it.
•DO NOT modify this product in any way.
•Keep work areas clean and well lit.
•Do not operate tools in explosive atmospheres.
•Before using an electric powered appliance, check the rating label
and voltage information on this manual, or the rating label on back
of the machine.
•Always connect the device to a socket with Residual Current
Device (RCD) fitted with your home circuits.
•If you are unsure, please seek a certified election for advice.
•The appliance must not be immersed in liquid.
•Do not use power tools in wet or damp conditions.
•Do not overload your power tools. Match each tool to the task.
•Do not use any power tool if the on/off switch is damaged.
•Check that the moving parts of your tool operate smoothly and are
not cracked or damaged.

RISK OF PERSONAL INJURY
•DO NOT use the appliance other than for the intended use.
•Use personal protective equipment. Always use eye
protection.
•Use ear protection.
•Do not wrap the device in a cloth or other material to
suppress noise. This will hinder the proper ventilation of the
device. This could ignite a fire and cause burns.
•Wear soft gloves when using this tool to prevent discomfort.
•Hold the power tool firmly to reduce the vibration levels.
•Ensure the switch is in the off position before connecting to a
power source, picking up or carrying the tool.
•Remove any adjusting keys or wrenches before turning the
tool on.
•Do not overreach. Keep proper balance at all times.
•Do not wear loose clothing or jewellery.
•Take a break if you feel vibration-related discomfort.
•DO NOT operate any appliance with a damaged cord or plug
or after the appliance malfunctions or is dropped or damaged
in any manner. Return appliance to the nearest authorized
service facility
for examination, repair or electrical or mechanical adjustment.
•If the supply cord is damaged it must be replaced by the
manufacturer or an authorized service agent or a qualified
technician in order to avoid a hazard.
•The use of accessories is not recommended by the
manufacturer as they may cause injuries to persons.
•Do not let the cord hang over the edge of a table or counter or
touch a hot surface.
•Do not place on or near a hot gas or electric burner or in a
heated oven.
•Unplug from outlet when not in use and before cleaning.

OVERVIEW

OPERATING THE PRODUCT
ASSEMBLY
Warning! Before assembly, remove the battery pack from the tool.
Fig.B
Fitting and removing the battery (Fig.B)
Your hedge trimmer is equipped with a battery pack, which powers the
unit.
To fit battery pack
1. Place battery pack in your hedge trimmer. Align raised rib on battery
pack with groove inside hedge trimmer. See Figure B.
2. Make sure the latches on each side of your battery pack snap in
place and battery pack secured in hedge trimmer before beginning
operation.
To remove battery pack
1.Locate latches on end of battery pack and depress to release battery
pack from your hedge trimmer.
2. Remove battery pack from your hedge trimmer. See Figure B.
USE
Let the tool work at its own pace.
Do not overload.

SWITCH ON AND OFF
Fig.D
For your safety, this tool is equipped with a double switch system. This
system prevents starting the tool inadvertently and will only allow
operation while holding the tool with both hands.
Switching on
· Squeeze the front handle switch (1).
· Squeeze the front trigger switch (2).
Switching off
· Release the front handle switch (1) or the trigger switch (2).
Never attempt to lock a switch in the on position.
Battery Charging
Observe correct mains voltage: The voltage of the power source must
agree with the voltage specified on the nameplate of the unit.
Equipment marked with 230 V can also be connected to 220 V or 240
V.
The Li-ion battery is protected against deep discharging by the
“Electronic Cell Protection”. When the battery is empty, the machine is
switched off by means of a protective circuit: The inserted tool no longer
rotates.

WARNING: Do not continue to press the On/Off switch after the
machine has been automatically switched off. The battery can be
damaged.
The battery is supplied partially charged. To ensure full capacity of the
battery, completely charge the battery in the battery charger before
using your power tool for the first time.
A battery that is new or has not been used for a longer period does not
develop its full capacity until after approx. 5 charging/discharging
cycles.
When the machine cannot rotate while the On/Off switch is pressed,
then the battery does not have enough capacity and should be charged.
5
24 3
6
1
INSERT
Plug the mains plug of the adaptor (1) into a socket outlet and the
adaptor plug (2) into the socket (4) on the charger station (3). At this
time, the battery charge-control indicator (6) lights up. Then insert the
battery pack into the charger station. The battery charge-control
indicator indicates the charging progress. The indicator lights up red
during the charge procedure. The battery is completely charged when
the indicator lights up green again.
Disconnect the battery charger from the mains supply when not
using it for longer periods.
Protect the battery charger against moisture!

CLEANING & STORAGE
Your tool has been designed to operate over a long period of time
with a minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and regular cleaning.
Your charger does not require any maintenance apart from
regular cleaning.
1. Before performing any maintenance on the tool, remove the
battery from the tool. Unplug the charger before cleaning it.
2. After use, carefully clean the blades.
3. After cleaning, apply a film of light machine oil to prevent the
blades from rusting.
4. Regularly clean the ventilation slots in your tool and charger
using a soft brush or dry cloth.
5. Regularly clean the motor housing using a damp cloth. Do not
use any abrasive or solvent-based cleaner.
Ensure you store this hedge trimmer, along with any accessories
and this instruction manual, in a secure, dry place. This way, you
will always have all the information and parts together.

SPARE PARTS/REPAIR
To order replacement parts, please go to www.nettadirect.com/parts.
You will need PDC information from your product, user manual or
carton box. Alternatively, go to our website and use search bar to find
the parts available.
You can also find this code on the back of this User Manual.
For our Repair Service, please contact our customer support with email
on [e-mail] they will provide with more details of
repair service with NETTA.
DISPOSAL OF PRODUCT
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE
PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC.
DISPOSAL:
Please dispose of this product responsibly. This item cannot be
disposed of with general waste. Please contact your local
council authority for more information on how to dispose this
product. If this product is disposed of with general waste, it will
end up in a landfill and will leak hazardous substances into the
groundwater –effecting our food chain.
YOUR WARRANTY
If you purchased with NETTADIRECT, or one of our authorised resellers, you
will automatically enrol your warranty for 1 (ONE) year. You do not need to
register again for your warranty. All warranties will be carry out our terms and
conditions include warranty conditions you will find out from our website at
www.nettadirect.com.

COPYRIGHTS
NETTA and its logo including images and contents in this manual and website
is copyrighted. All intellectual property rights belong to NETTA owner
CONSUMABLE DIRECT LIMITED.
ANY UNAUTHORISED USE, MODIFICATION or DISTRIBUTION of the
NETTA logo, website image, and its contents (from website, manuals) will
violate worldwide copyright, trademark, and associated laws.
We reserve the right to proceed with lawsuits to anyone who is found
breaching our copyrights policy. For more details, please check our website
copyright policy for more information.
PRODUCT DEPENDENCY CODE (PDC)
Your PDC is below:
NETTA is a registered trademark of CONSUMABLE DIRECT LIMITED.
Product Produced for CONSUMABLE DIRECT LIMITED M32 0JT U.K.
Printed in China
PDC: ET1306
SKU: 103773