NetView NVP1015 User manual

USER
NVP1015 / 1017
15” / 17” LCD
1U TFT LCD Keyboard Drawer
MANUAL

ii-Tech Co pany LLC TOLL FREE: [phone] • EMAIL: info@iTechK M.com • WEB: www.iTechK M.com
1
NVP1015 / NVP1017 User Manual
Table of Contents
1. Table of Contents P.1
2. Introduction P.2
3. Features P.2
4. Package Contents P.3
5. Optional Accessories P.4
6. Peripheral Products P.4
7. I portant Safeguards P.5
8. Structure Diagra P.6
9. Di ension Diagra
N P1015 P.7
N P1017 P.8
10. LCD OSD Menu Operation
LCD Membrane Diagram P.9
Main Menu P.9
Sub Menu P.10-12
11. Resolution Settings
For Windows P.12
For SUN Servers P.13
12. Technical Specification P. 14

ii-Tech Co pany LLC TOLL FREE: [phone] • EMAIL: info@iTechK M.com • WEB: www.iTechK M.com
2
NVP1015 / NVP1017 User Manual
2. Introduction
N P Series is a combination of keyboard, mouse and monitor into a drawer, with features such as
flip-up design, adjustable brackets, built in LCD OSD to provide effective assistant for an
administrator to control PC system.
N P Series provides cost effective for your limited IT budget over using CRT and rack mounting.
Also, it will be space saving for your compact environment rack and effective assistant for an
administrator to control PC system.
3. Features
• 1U height, separate sliding screen and keyboard using unique miniature
Cyber slides
• Adjustable mounting brackets from 390 to 790mm (front to rear 19” mounts
• Lightweight aluminium construction—with black anodise finish
• Slim Size keyboard with GlidePoint TM touch pad mouse
• Standard D-SUB 15-pin GA input Connector
• Supplied with 12 5A remote power adapter (single power resource)
• Bulit-in On Screen Display controlled by integral membrane switch
• Unique mechanical design to maximize rack mountable space
• Unique monitor flip-up design allows viewing through closed glass door
of cabinet.
Disclaimer
This information is subject to change without notice. The producer of this manual accepts no
responsibility for damage or claims, resulting from misuse or misinterpretation

ii-Tech Co pany LLC TOLL FREE: [phone] • EMAIL: info@iTechK M.com • WEB: www.iTechK M.com
3
NVP1015 / NVP1017 User Manual
4. Package Contents
LCD Monitor 1 Piece
User Manual 1 Piece
DC Power Adapter 1 Piece
Power Cord 1 Piece
Mounting Bracket 1 Pair
Fasteners 4 Pieces
ND-6 3-in-1 K M cable 1 Pieces
Before Unpacking
It is very important to locate the LCD Keyboard Drawer in a suitable environment.
• The surface for placing and fixing the LCD Keyboard Drawer should be stable and level
or mounted into a suitable cabinet.
• Make sure the place has good ventilation, is out of direct sunlight, away from sources of
excessive dust, dirt, heat, water, moisture and vibration.
• Convenience for connecting the LCD Keyboard Drawer to the related facilities should
be well considers too.
Unpacking
The LCD Keyboard Drawer comes with the standard parts shown as above. Check and make
sure they are included and in good condition. If anything is missing, or damage, contact the
supplier immediately.

ii-Tech Co pany LLC TOLL FREE: [phone] • EMAIL: info@iTechK M.com • WEB: www.iTechK M.com
4
NVP1015 / NVP1017 User Manual
5. Optional Accessories
Video Input
12V / 24V / 48V DC Power
SUN-31 SUN / iMAC USB to PS/2 adapter
6. Peripheral Products
Model Description
N -401 / N -801 / N -1601 4-Port / 8-port / 16-Port PS/2 K M switch
N -1602 16-Port 2-Console PS/2 K M switch
N -S801 / N -S1601 8-Port /16-port USB K M switch
N -S1602 16-port 2-Console USB K M switch
N -101 CAT.5 PS/2 K M extender

ii-Tech Co pany LLC TOLL FREE: [phone] • EMAIL: info@iTechK M.com • WEB: www.iTechK M.com
5
NVP1015 / NVP1017 User Manual
What the warranty does not dover
1. Any product, on which the serial number has been defaced, modified or removed.
2. Damage, deterioration or malfunction resulting from:
a) Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized
product modification, or failure to follow instructions supplied with the product.
b) Repair or attempted repair by anyone not authorized by us.
c) Any damage of the product due to shipment.
d) Removal or installation of the product.
e) Causes external to the product, such as electric power fluctuation or failure.
f) Use of supplies or parts not meeting our specifications.
g) Normal wear and tear.
h) Any other causes which does not relate to a product defect.
3. Removal, installation, and set-up service charges.
Please read all of these instructions carefully before you use the device.
Save this manual for future reference.
• Unplug the LCD Keyboard Drawer from the power outlet before cleaning.
• Do not spray liquid cleaners or aerosol directly on the device. Wet a cloth with a neutral
detergent (e.g. clean water) and squeeze it tight, then clean the screen slightly with it.
• Do not expose the LCD Keyboard Drawer directly to rain, water, moisture or sunlight.
• Avoid pressure on the LCD screen to prevent permanent damage to the display.
• Do not attempt to service the device yourself. Improper operation may void your
warranty. Refer all servicing to qualified service personnel.
•
Safe storage environment of the LCD Keyboard Drawer is ranging between –20
o
C
and 60
o
C. Permanent damage could occur if the LCD Keyboard Drawer is stored
outside the safe range.
• Unplug the LCD Keyboard Drawer immediately and call qualified service
personnel under the following conditions:
1. The GA signal cord is frayed or damaged.
2. If the monitor has been exposed to rain, liquid or water.
3. If the monitor has been dropped or the casing has been damaged.
7. I portant Safeguards

ii-Tech Co pany LLC TOLL FREE: [phone] • EMAIL: info@iTechK M.com • WEB: www.iTechK M.com
6
NVP1015 / NVP1017 User Manual
8. Structure Diagra
1. PS/2 keyboard
2. Alu iniu front panel
3. Class A active atrix TFT LCD panel
4. Rear etal case
5. Analog to digital signal converter board
6. LCD inverter
7. LCD e brane
8. Ball bearing telescopic slides with stopper
9. Adjustable ounting bracket
10. Optional KVM e brane & KVM switch board

ii-Tech Co pany LLC TOLL FREE: [phone] • EMAIL: info@iTechK M.com • WEB: www.iTechK M.com
7
NVP1015 / NVP1017 User Manual
9. Di ensions Diagra
NVP1015 1U 15” LCD Keyboard Drawer

ii-Tech Co pany LLC TOLL FREE: [phone] • EMAIL: info@iTechK M.com • WEB: www.iTechK M.com
8
NVP1015 / NVP1017 User Manual
9. Di ensions Diagra
NVP1017 1U 17” LCD Keyboard Drawer

ii-Tech Co pany LLC TOLL FREE: [phone] • EMAIL: info@iTechK M.com • WEB: www.iTechK M.com
9
NVP1015 / NVP1017 User Manual
10. LCD OSD Menu Operation
LCD Me brane diagra
Main Menu
Bright / Contrast
• To enter into the Bright, Black level & Contrast sub-menu
Auto Adjust
• To perform automatic optimisations of all functions
• An “ Adjusting” message is displayed during the process
Phase / Clock
• To enter into the phase & clock sub menu
H/V Position
• To enter into the H/ Position sub-menu
MISC
• To enter into the MISC sub-menu
Reset
• Reset to the default factory settings

ii-Tech Co pany LLC TOLL FREE: [phone] • EMAIL: info@iTechK M.com • WEB: www.iTechK M.com
10
NVP1015 / NVP1017 User Manual
10. LCD OSD Menu Operation
Bright / Contrast
1. Brightness
• To perform brightness adjustment of the input RGB signal
• Use the Left & Right button to adjust and button to “Brightness” 2.
2. Contrast
• To adjust the contrast level of the input signal
• Use the Left & Right button to adjust and button to “Contrast”
Phase / Clock
1. Phase
• To adjust input video sampling clock’s phase
• Use the Left & Right button to adjust and button to “Phase”
2. Clock
• To adjust input video sampling clock
• Use the Left & Right button to adjust and button to “Clock”
H/V Position
1. H.Position
• To adjust the horizontal size of the frame
• Use the Left & Right button to adjust and button to “H.position”.
2. V.Position
• To adjust the vertical position of the frame
• Use the Left & Right button to adjust and button to “ .position”.

ii-Tech Co pany LLC TOLL FREE: [phone] • EMAIL: info@iTechK M.com • WEB: www.iTechK M.com
11
NVP1015 / NVP1017 User Manual
10. LCD OSD Menu Operation
1. Infor ation
• The first header row shows the current resolution setup
• The second header row shows the horizontal frequency of the current input
signal
• The third header row shows the vertical frequency of the current input signal
2. OSD Ti er
• To modify the duration of the OSD time-out
3. Color
a) 5500K
• Select Colour Temp at 5500K
b) 6500K
• Select Colour Temp at 6500K
c) 9500K
• Select Colour Temp at 9500K
d) User
• Change Colour Temp by manual
4. Language
• To select the language of OSD menu 7 Languages :
(1) English
(2) Japanese
(3) Chinese
(4) German
(5) Francais
(6) Espanol
(7) Italiano
MISC

ii-Tech Co pany LLC TOLL FREE: [phone] • EMAIL: info@iTechK M.com • WEB: www.iTechK M.com
12
NVP1015 / NVP1017 User Manual
11. Resolution Settings
For Microsoft Windows
Step 1 – Press right click on the desktop
Step 2 – Choose “Properties”
Step 3 – Change the “Screen Resolution”
Step 4 – Change the “Screen refresh rate”

ii-Tech Co pany LLC TOLL FREE: [phone] • EMAIL: info@iTechK M.com • WEB: www.iTechK M.com
13
NVP1015 / NVP1017 User Manual
11. Resolution Settings
For SUN Servers
• Resolution configuration procedures should be run by qualified SUN
server administrator
• Sun Servers are using resolution at 1152 x 900 x 76Hz.
• Supported resolution mode for 15” LCD:
• 1024 x 768 x 70/75Hz
• Supported resolution mode for 17” LCD:
• 1280 x 1024 x 75Hz
• You need to change the Sun Server resolution before you connect to
LCD Display.
• Please do the following procedures to change the resolution settings :
1. As root:
You may find the following comment 7user/sbin/m64config”.
2. To view current resolution:
Type 7user/sbin/m64config - prconf.
3. To change to 1024x768 @ 70MHz:
Type 7user/sbin/m64config - res 1024x768x70 now”.
4. The screen will be rubbish.
5. Then type “pkill Xsun”.
And Type “pkill Xsession” to restart the Xsession.
Note : Remember to RESTART the server after these processes.
• Under Common Desktop Environment (CDE).
• To change the OpenBoot resolution, you can type the following command in
OK prompt.
1. In OK prompt, type “setenv output-device screen:r1024x768x70”.
2. Type “printenv” to confirm the resolution has been changed to 1024x768x70Hz.
3. Then type, “reset” to restart the system.
Note : Remember to RESTART the server after these processes.

ii-Tech Co pany LLC TOLL FREE: [phone] • EMAIL: info@iTechK M.com • WEB: www.iTechK M.com
14
NVP1015 / NVP1017 User Manual
12. Technical Specification
Ite Specification
LCD Screen
Manufacturer
LCD Origin South Korea
Panel 15” TFT 17” TFT
Resolution 1,024 x 768 1,280 x 1,024
Brightness 300 cd/m2 350 cd/m2
Color 16.2 Million 16.2 Million
Contrast Ratio 450:1 350:1
Viewing Angle 140° x 125° 140° x 130°
Display Area 304 x 228 mm 337 x 270 mm
Pixel Pitch 0.297 mm 0.264 mm
Response Ti e (Tr) 5ms
Response Ti e (Tf) 20ms
Back Light 4 x Cold Cathode Fluorescent Tube
Horizontal Sync. 48.4 kHz 64 ~ 80 kHz
Vertical Sync. 65 MHz 60 ~ 75 Hz
Input Signal Analog RGB 0.7 p-p
Power Manage ent ESA DPMS
Brightness, Contract, Colour, Clock
H.Position, .Position, Phase, Scaling
Auto Config., Input Select, Multi-Window
OSD Control
Clear EEPROM, OSD adjust
Power Input 12 DC Adapter
Video Input 15-pin D-Sub Connector
Di ension 43.9(W) x 4.45(H) x 65(D) cm
Weight N P1015 / 1017 : 10 / 11 kg
LCD
*All brand names, logo registered trademarks are properties of their respective owners.