Nevco 9715 User manual

1
1
2
2
3
3
4
4
A A
B B
C C
D D
Drawn Date
Drawing No.
Sheet of
Rev
Nevco, Inc.
Greenville, Illinois 62246
AB
9715 Locker
Room Clock
Installation Print
MM 1/16/12
241-0370
1 1
--
Note: Hanging weight of 9715 = 3 lbs
Clips Installed Upside Down (Hidden)
Clips Installed Normall (Exposed)
Note: Clips can be moved / installed anywhere along the edges of the frame to accommodate different installations
Input to 9715 clock from IAD
(Indoor Accessory Driver)
or the output from
another 9715 in the chain.
Standard straight-thru "Patch" style
Ethernet cable is used to connect
9715 clocks to IAD or other clocks
See IAD Installation Manual for
complete wiring details.
Optional output to next
9715 Locker Room Clock
Standard straight-thru "Patch" style
Ethernet cable is used to connect
9715 clocks to IAD or other clocks
See IAD Installation Manual for
complete wiring details.
Note:
Max of four 9715 Locker Room Clocks
per channel of IAD. See IAD Installation
manual for complete details.

1
1
2
2
3
3
4
4
A A
B B
C C
D D
Drawn Date
Drawing No.
Sheet of
Rev
Nevco, Inc.
Greenville, Illinois 62246
IAD-3
Indoor Accessory Driver
Signal Input/Output
Configurations
KAB 9/5/2017
275-0825
1 2
--
MPCW-6 (1st & 2nd Gen) with coax daisy chain output to next device
Option: Series 7 Receiver can be added to this config
Coax
Out
MPCX with coax daisy chain output to next device
option: Series 7 Receiver can be added to this config
Series 7 Receiver with coax daisy chain
output to next device
Option: Coax Input
Coax input with coax daisy chain
output to next device
Coax
Out
Coax Out
To next device
(If Required)
Please Note:
-Systems w/ multiple signal inputs will use whichever signal is present 1st.
The 1st signal must be turned off for the equipment to start using 2nd signal.
-To maintain reliable wireless connection there must be clear line of sight
between the transmitter and all receivers in the system.
12VDC INPUT
Use included Power Supply
In: 120VAC/1.2A: 240VAC/.6A
Out: 12VDC, 60W, 5.0A
12VDC INPUT
Use included Power Supply
In: 120VAC/1.2A: 240VAC/.6A
Out: 12VDC, 60W, 5.0A
12VDC INPUT
Use included Power Supply
In: 120VAC/1.2A: 240VAC/.6A
Out: 12VDC, 60W, 5.0A
12VDC INPUT
Use included Power Supply
In: 120VAC/1.2A: 240VAC/.6A
Out: 12VDC, 60W, 5.0A
Mounting Flanges
Remove screws from
face of lid and attach
MPCX2 receiver using
same screws
From Scoreboard
Output
60W Power Supply
120V required
Typical all configuration

1
1
2
2
3
3
4
4
A A
B B
C C
D D
Drawn Date
Drawing No.
Sheet of
Rev
Nevco, Inc.
Greenville, Illinois 62246
IAD-3
Indoor Accessory Driver
Accessory Output
Configurations
KAB 9/5/2017
275-0825
2 2
--
9715A #8 9715A #7 9715A #6 9715A #5
9715A #4 9715A #3 9715A #2 9715A #1
Use standard 8 conductor, 24 gauge Straight-Thru "Patch"
style Ethernet cables to connect 9715A clocks together.
Max Chain Length for number of clocks = 325'(1), 275'(2),225'(3),175'(4)
DO NOT USE CROSSOVER CABLES
DO NOT CONNECT IAD or 9715A TO COMPUTER NETWORK
Ethernet (patch cables) extensions available.
-25ft Nevco Part #603-2689 -50ft Nevco Part #603-4970
-100ft Nevco Part #603-4971 -150ft Nevco Part #603-4972
-200ft Nevco Part #603-4973
Horn #1
Horn #2
EOP #1
Nevco IAD
10ft Cable
10ftCable
25ft Cable
Combine 10ft & 25ft cables
to connect IAD to EOP.
14 gauge extensions available.
-25 foot Nevco Part #603-2372
-50 foot Nevco Part #603-3032
-100 foot Nevco Part #603-3033
-150 foot Nevco Part #603-3034
-200 foot Nevco Part #603-3035
1. Orange Stripe / White
2. Orange Solid
3. Green Stripe / White
4. Blue Solid
5. Blue Strip / White
6. Green Solid
7. Brown Strip / White
8. Brown Solid
Patch Cable pinout (TIA T568B Standard)
Both ends of Ethernet cable should match each other
Bottom of
RJ-45 crimp
on connector
IAD output power limit 5.0 Amps @ 12vDC
# Outputs
Total Amps
Max Devices
12vDC AmpsDevice Description
21.2
40.3
Locker Room Clocks
1
1.6
40.4
(SSC) Slim Shot Clocks
1
2.8
40.7
(SSC-T5) Shot Clocks
14.041.0
(SSC-T9) Shot Clocks
2
0.610.6
Horns 1
1.2
1
1.2
EOPs
per Device per output per output
* IAD max. input current at 120VAC is 0.5Amps
SSC
SSC-T5/T9
Horns mounted in
external box
Horn Extension Cable Packages
-25 foot Nevco Part #275-5349
-50 foot Nevco Part #275-5350
-100 foot Nevco Part #275-5351
-150 foot Nevco Part #275-5352
-200 foot Nevco Part #275-5353
10ft Cable
25ftCable