New Age Pet InnPlace EHHC101S-02 User manual

ecoConcepts™ Habitat ‘n Home Pet Furniture
InnPlace™ Pet Crate / End Table
(ITEM# EHHC101S-02, EHHC101M-02, EHHC101L-02)
(ITEM# EHHC102S-02, EHHC102M-02, EHHC102L-02)
Congratulations on your purchase!
Before you Start – check for damaged or missing parts, Visit
www.newagepet.com, Contact us, to order replacement parts.
Part List:
Front Panel – 1 Back Panel – 1
Side Wall Panels – 2 Table Top – 1
Floor Support Bar – 1 (for LARGE only) Floor Panel – 1
Long Thumb Screw x 4 Short Thumb Screw x 4
Side Wall Pin x 2 (For Large Only)
©Copy Right Pinta International, Inc. 2012
It is very important to keep the crate clean for the health
of your pet. ecoConcepts’ non-absorbent ecoFLEX
material and the easy-to-assemble design will be
appreciated when it’s time to clean.
Remove the table top by revising the last step of the
assembly instruction. Now you have the access to the
entire inside of the crate.
For a quick cleaning, simply wipe the inside and outside
of the crate with a wet sponge or cloth. When a deep
cleaning is needed, we recommend using a detergent
with strong grease cutting capabilities and safe to use
around you, your kids and your pets. Then rinse off the
detergent with garden hose. Allow the interior to dry
thoroughly before reassemble the table top. A deep
cleaning is recommend twice a year to keep the crate
clean and keep your pet healthy.
Keep the Crate Clean for A Healthy Pet

Complete.
Step 1: Connect the Front Panel with a
Side Wall Panel with (1) Long Thumb
Screws.
Step 2: Attach the second Side Wall Panel
to the Front Panel with (1) Long Thumb
Screw.
Step 3: Attach the Back Panel with the
Side Wall Panels with (2) Long Thumb
Screw, one on each side.
Step 4: (For LARGE model only) Install
the Floor Support Bar by pressing the
metal bar onto the plastic brackets
preinstalled on the Side Panels.
Step 5: Install the Floor Panel. Step 6A: (For LARGE model only) Insert
the Side Wall Pin into the bracket
preinstalled on the upper edge of the Side
Wall Panel.
Step 6B: Place the Table Top piece in
place and secure it by (4) Short Thumb
Screws on each corner.