New Classic Furniture D1435-52S User manual

1
This page lists all the contents included in the Box. Please take time to identify the
hardware as well as the individual components to this product. As you unpack and
prepare for assembly, place the contents on a carpeted or padded area to protect
them from damage.
C l e a n i n g & C a r e
Treat the surface with care, clean it with a dry or damp soft cloth.
Do not use abrasive cleaners. Hardware may be loosen over time.
Periodically check that all connections are tight.
A Phillips screwdriver is necessary for assembly.
ASSEMBLY INSTRUCTIONS
MILO COUNTER TABLE
MILO COUNTER CHAIR (SET INCLUDES 4 CHAIRS)
ITEM NO. D1435-52S

Do not put hot pots or objects which are more than
80 degrees Fahrenheit directly on the table.
2
GENERAL INFORMATION, TIPS & TRICKS
1. Please read the assembly instructions prior to assembling this product.
2. To avoid damages, assemble this product on a non-abrasive surface such as carpet.
3. Make sure all bolts and nuts are tightly fastened before the product is used.
4. Not for commercial use.
5. Care: Wipe with a damp cloth. Use furniture polish or lemon oil on the
wood as needed. Avoid prolonged exposure to moisture.
A Phillips screwdriver is necessary for assembly.
Please make sure you have all parts before beginning assembly. Please wait
until all steps are completed before tightening bolts. We recommend two
people to assemble.

SIZE: 5/16" DIA
TABLE HARDWARE LIST
QTY: 8 PCS
3
QTY: 1 PC
A. Table Top
TABLE PART LIST
QTY: 4 PCS
B. Table Legs
SIZE: 5/16" DIA
3. NUTS
QTY: 8 PCS
1. FLAT WASHERS
QTY: 8 PCS
SIZE: 5/16" DIA
4. ALLEN WRENCH
SIZE: 5/16" DIA
QTY: 1 PC
2. SPRING WASHERS

STEP 1
A
4
3
2
1
Turn the table to the upright position carefully.
Make sure the table is level, and then securely tighten all nuts at this stage.
Assembly is completed.
The table is now ready for use.
STEP 2
Turn the Table Top (A) upside down on a non-abrasive surface such as a carpet
(the underside of the Table Top (A) should be placed face up).
Attac
h the Table Legs (B) to the corner of the apron of the Table Top (A) by using Flat Washers (1), Spring
Washers (2), and Nuts (3), and tighten with Allen Wrench (4) as per illustration below.
4
TABLE ASSEMBLY INSTRUCTIONS
BBBB

SIZE: #8 x 1 1/2" LSIZE: 1/4" x 3"
QTY: 16 PCS
6. LONG BOLTS
QTY: 4 PCS
SIZE: 5/16" DIA
CP1:YTQSCP44:YTQSCP44:YTQ
SIZE: 5/16" DIA
WOOD SCREWS.7SHORT BOLTS.5
SIZE: 1/4" x 1 3/4"
A. Back Legs
QTY: 48 PCS
CHAIR HARDWARE LIST
4. ALLEN WRENCH3. NUTS
SIZE: 5/16" DIA
CHAIR PART LIST
D. Front Legs (Left - Right)
QTY: 4 PCS QTY: 4 PCS
E. Side Stretchers (Left - Right) F. Front Stretchers
C. Cushio
n Seats B. Seat Frames
QTY: 4 PCS
QTY: 8 PCS QTY: 8 PCS
QTY: 16 PCS
5
SIZE: 5/16" DIA
2. SPRING WASHERS1. FLAT WASHERS
QTY: 12 PCS

6
STEP 1
Take the Allen Wrench, and turn the
bolts until the legs are secure.
DO NOT TIGHTEN COMPLETELY.
Stop when you feel you are adding
force to tighten the bolts.
Insert Side Stretchers (E) into the holes of Back Leg (A) with Wood Screws (7) by using Screwdriver
(not included). Do not fully tighten all screws in this step.
CHAIR ASSEMBLY INSTRUCTIONS
STEP 2
Put the Back Leg (A) and the Seat Frame (B) upside down on the soft and smooth surface.
Then insert Long Bolts(6) Short Bolts (5),, Spring Washe
rs (2), and Flat Washers (1) into the predrilled holes
of each corner, by using Allen Wrench (4).
B
1
6
4
521
A
2
4
E (Left)
7
7
E (Right)
A
B

7
CHAIR ASSEMBLY INSTRUCTIONS
First, insert the Front Stretcher (F) into the holes of Front Legs (D) by using Wood Screws (7).
Attach the Front Legs (D) to the Side Stretchers (E) and the corner of Seat Frame (B). Insert Flat Washers (1),
Spring Washers (2), and Nuts (3) usby ing Allen Wrench (4). Tighten all Wood Screws (7) in this step.
STEP 4
STEP 3
Attach the Cushion Seat (C) onto the Seat Frame (B) with Wood Screws (7) by using Screwdriver
(not included).
7
7
7
7
7
7
7
7
7
E (Left)
D (Right)
E (Right)
F
D (Left)
3
2
1
4
B
A

8
CHAIR ASSEMBLY INSTRUCTIONS
Printed in Vietnam
Turn the assembled chair to the upright position carefully. Make sure the chair is level, and then
securely tighten all bolts at this stage. Assembly is now completed.
STEP 5