New Classic Furniture MITCHELL D1763-50S User manual

Thank you for purchasing this quality product. Be sure to check all packing materials carefully for small parts,
which may have come loose inside the carton during shipment. Identify and count all items and compare with
the PARTS LIST and/or HARDWARE LIST shown below.
Caution: Please read the instructions thoroughly before assembly.
1. We recommend that you assemble this product with the assistance of another person; this will make the
assembly easier, and will help eliminate damage to the product or injury to persons during assembly.
2. Please do not over tighten screws or bolts until the assembly is completed.
3. Please put all parts on a non-abrasive floor before assembly,and follow the assembly steps to assemble
your newly purchased product correctly and efficently.
PARTS LIST
Assembly Instructions
HARDWARE LIST
MADE IN VIETNAM PAGE: 1 OF 3
NO.
A
COMPONENT
CHAIR BACK
SKETCH QTY.
4 PCS
ITEM NO.D1763-50S
MITCHELL 5PC DINING SET
(SET INCLUDES 4 CHAIRS)
B SEAT FRAME 4 PCS
DCUSHION
SEAT 4 PCS
C FRONT LEG 8 PCS
NO.
1
COMPONENT
FLAT WASHER
5/16” DIA.
SPRING
WASHER
5/16” DIA.
SKETCH QTY.
44 PCS
244 PCS
NUT
5/16” DIA.
ALLEN
WRENCH
5/16” DIA.
316 PCS
41 PC
LONG BOLT
1/4” x 3”
616 PCS
WOOD SCREW
#8 x 1 1/2”
724 PCS
SHORT BOLT
1/4” x 1 3/4”
512 PCS

MADE IN VIETNAM PAGE: 2 OF 3
To assemble the chairs, please follow the following steps and repeat for each chair:
STEP 1
Lay the chair back on soft clean surface and install
the seat frame.
STEP 2
Install the chair front legs once the seat frame is
secured.
STEP 3
Place the assembled seat frame on the cushion
seat and attach with wood screws.
Assembly Instructions
1 2 3 4
B
A
C
C
77
777
7
D
2 1
5
4
6
4
2 1
B
A
ITEM NO.D1763-50S
MITCHELL 5PC DINING SET
(SET INCLUDES 4 CHAIRS)

5
4
4
1
2
3
5
4
4
4
4
1
2
3
34
4
A
B
C
CC
C
MADE IN VIETNAM PAGE: 3 OF 3
PARTS LIST HARDWARE LIST
NO.
1
COMPONENT
SPRING WASHER
5/16” DIA.
SKETCH QTY.
16 PCS
2FLAT WASHER
5/16” DIA. 16 PCS
3LONG BOLT
5/16” x 2 1/2” 8 PCS
4SHORT BOLT
1/4” x 1” 8 PCS
5ALLEN KEY
M4 1 PC
NO.
A
COMPONENT
TABLE TOP
SKETCH QTY.
1 PC
BMIDDLE SHELF 1 PC
CTABLE LEG 4 PCS
To assemble the table, please follow the following
steps but do not tighten all bolts:
STEP 1: Install 3 of the table legs first.
STEP 2: Install the middle shelf.
STEP 3: Install the last table leg.
STEP 4: Turn the table to the upright position
carefully and make sure the table is level,
then tighten all bolts.
Assembly Instructions
ITEM NO.D1763-50S
MITCHELL 5PC DINING SET
(SET INCLUDES 4 CHAIRS)