New Comfort CH3000 User manual

New Comfort Air Purifier
MODEL: CH3000
USER GUIDE

New Comfort Air Purifier
MODEL: CH3000
USER GUIDE
Please read all of the information provided in this user‟s guide before operating.
WARNING
This air unit is not a medical device. Do not stop or alter any medical therapy
programs or medications without the advice of your physician.
RISK OF ELECTRICAL SHOCK
DO NOT OPEN
CAUTION
ATTENTION
This “bolt of lightning” indicates that insulated material within
your unit may cause an electrical shock. For the safety of
everyone, do not remove product covering.

Q. What is Nano photo-catalytic filter?
A. The action of this washable filter is based on photo-catalytic oxidation
(PCO) technique. Airborne pollutants are treated by semiconductor photo-
catalysis, in which the key material is TiO2.TiO2 particles are used as photo-
catalyst because it is non-toxic, chemically stable, and possesses relatively
high photo-catalytic activity. When used in conjunction with UV it can
remove molds, bacteria and Virus
Q. Does this unit use activated oxygen?
A. For your safety this air purifier does not use activated oxygen which
overexposure is thought to cause illness. This air purifier safely cleans and
purifies the air.
Q. What’s the function of UV light?
The Ultraviolet Light destroys bacteria, viruses, fungi, yeast, and mold; it
reduces or prevents mold growth, thereby allowing them to function at peak
efficiency. These high-output, long-lived UV lamps can be used in industrial
commercial, and residential applications.
Q. Where should I place the Air Purifier in my home or office?
A. The Air Purifier should be placed in the room where you have the most
pollutants. The Air Purifier is easy to move so you might want to try it in a
couple of locations to help decide what works best for your environment. An
elevated location is better to distribute ions and activated oxygen more
evenly. Air Purifier works best if it is placed within 10 feet of a cold air
return.
Q. How long will the Air Purifier last?
A. The air purifier is made of stainless steel and solid wood construction.
Because of the quality material and superior craftsmanship that goes into
each Air Purifier you will enjoy it for many years. This Air Purifier comes
with a 3 year warranty.
Q. Is it difficult to install?
A. No. Just plug the power cord (located in separate box packaged inside the
carton), into the unit and set the time for the area you will be treating. Install
the Air Purifier in any room, but try to find a place where it can be up off the
ground four feet or more. Some customers prefer to have more than one unit
to better improve the air quality in the home.
This “exclamation point” calls attention to a feature for which
you should read the enclosed literature carefully to prevent
operating and maintenance problems.
COMMONLY ASKED QUESTIONS
-10-
-9-
Caution: This unit is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision concerning use of the unit
by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the unit.
-1-

Congratulations on your purchase. You have obtained a
state-of-the-art New Comfort air purification system with
state of the art modern technology. Only the finest materials
surround the finest air purification technology. We hope
that you will enjoy your purchase for years to come.
Read ALL instructions carefully before using this
product
Q. What does the New Comfort Air Purifier do?
A. It treats the air in your home or office by breaking down and filtering
odors and pollutants.
Q. How does the New Comfort Air Purifier treat the air?
A. The Air Purifier takes 6 stages of air purification systems to purify the air
and create a health and comfortable living environment.
Q. How does the New Comfort Air Purifier work?
A. It is a Six-stage process
1. The Air Purifier uses an optional needlepoint ionizer to drop dust,
smoke and other harmful particles from the air we breathe. In our
homes and offices there is a lack of negative ions and an
abundance of positive ions. The buildings we spend most of our
time in block out the natural occurring negative ions. The Air
Purifier recreates the natural balance of positive to negative ions
to significantly reduce airborne particulate.
2. The Air Purifier uses Nano photo-catalytic filter to treat the
airborne pollutants, it is revitalize when shined by the UV light.
3. The ultraviolet light destroys microorganisms such as bacterial,
mold and viruses in the air.
4. Activated Carbon filter is adopted to remove odors, bad smells
and kill bacteria.
5. HEPA filter can capture particles below 0.3 microscopic particles
such as radioactive dust in atomic plants. HEPA filter is a
mainstay in areas that require clean air such as hospitals, clean
rooms, and high-tech manufacturing plants.
6. Pre Filter
FOR YOUR RECORDS
Please record the model and serial number below, for easy reference, in case of
loss or theft. These numbers are located on the back panel of your air
purification unit. Space is also provided for other relevant information.
Model number
Serial Number
Date of Purchase
Purchased From
To clean needlepoint ionizer, first turn Off and unplug from outlet. Remove the fan grill
cover. The needle point ionizer will be easy to find in front of the fan by looking for two
pieces of wire. Take a q-tip or cotton swab dipped in alcohol and clean any dust that may
have accumulated on the needle points. While you have the front grill off the unit you
may also clean the fan and grill itself. To clean the fan simply wipe the blades with a
damp cloth or vacuum. To wash filters (HEPA filter, Tio2 filter, pre-filter) simply run
water from your faucet sink through the filter until clean. Flick water from filter and
then set aside to air dry. Do not use the spray nozzle on your sink (faucet only). Do not
blow air through the filter or use dryer to dry, the filter must be allowed to air dry until
completely dry. Only wash filters when significantly dirty to add to the life of the filter.
-2-

Understanding the New Comfort Air Purifier
(Front View)
PART FUNCTION
LCD display panel Display working status, time; with blue backlight
optional.
Remote Controller To control the working status of air purifier
Manual Button Control the air purifier by hand
Fan Grill Removable fan grill. Wash with warm soapy water,
dry completely before replacing.
(Unplug unit before removing)
CLEANING & MAINTENANCE
Caution: Turn off Power Switch and unplug from wall outlet if you want
to open the back panel of the unit to replace parts.
WHERE TO USE?
Home & Living Areas
All types of offices & stores
Odor clean-up
Hospitals & nursing homes
Veterinary offices
Hotel rooms
Doctors‟ offices
High pollen environments
Kitchens
Understanding the New Comfort Air
Purifier
(Back View)
PART DESCRIPTION
UV Light
Fan Grill
Manual Button
LCD
Display
panel
HEPA filter
Activated
Carbon Filter
Power Cord
Socket
-3-
-8-
WHERE TO USE?
TROUBLESHOOTING
Pre-filter
Photo catalytic
filter
Remote
Controller
TROUBLESHOOTING
If you suspect a problem with your unit check the following:
Unit is plugged in properly and turned on.
Check the fuse to make sure it is installed properly and not burned out. To replace
fuse, push in and turn fuse holder to the left, remove old fuse, replace with spare.
Use 1 amp fuse, 1.25 inches long.If the unit does not power on most likely the
fuse just needs replace. Fuses are standard and can be purchased at your local
hardware store.
Wall outlet is active
It is important that the Air purifier be properly grounded to avoid potential shock.
SERVICE

1. Manually, or with remote control, turn unit “on”.
2. Press “Fan △“ or “Fan ▽“ to adjust airflow speed. There are five speeds
from which to choose.
3.”Sterillize” controls the UV lamps and photo-catalytic filter. You‟ll know
that this feature is activated from the soft blue glow visible through the front
grill. Press this button to both activate and de-activate this feature “Don’t
stare directly at the blue light.”
4.” Anion” controls the dispersal of negative ions. You„ll know that this
feature is activated as the orange bulb will be lit and clearly visible through
the front grill. As with the “Sterilize” feature, this button can both activated
and de-activate the negative ions
5.”Sleep” mode dims the LCD panel to a minimum level allowing for a good
night‟s sleep when the unit is used in the bedroom. It is important to note that
use of “Sleep” mode does interrupt the Activated Oxygen setting but leaves
all remaining settings in tact.
6. Proper Installation of the photo-catalytic filter. Please be reminded if
you want to replace a photo-catalytic filter and reinstall the photo-catalytic
filter, you should install it according to the pictures indicated below,
otherwise, the unit does not work.
SERVICE
Power Cord 120 Volt grounded cord (unless otherwise
specified). DO NOT bypass ground wire cord.
TiO2 Photo-catalytic Filter Photo-catalytic filter can be replaced very easily. It
is long lasting and does not need replaced often.
Washable HEPA filter HEPA filter can be cleaned by water.
Carbon Filter It is non-washable.
UV light 365μm wavelength, replaceable by
authorized technician.
Pre-filter Remove dust, large particles.
NOTE: As you stand in front of the unit the ionizer will create a slight charge.
If you then touch a metal object there may be a static electric discharge similar
to touching a doorknob in winter.
-7-
OPERATION / SETTINGS AND CONTROLS
-4-
Power Switch
-7-
-7-
-4-
Your New Comfort Air Purifier is protected by the 3 year
Manufacturer warranty. Should your unit need service or
warranty work please contact your authorized dealer that you
purchased the unit from. New Comfort only accepts warranty
claims from the authorized New Comfort dealers. These dealers
are authorized to do warranty work and stock a wide variety of
parts.

To set the clock to the current time, press the “Time/Set” button twice in
quick succession. The “Time” indicator will flash. While flashing, press
“Hour up” or “Hour down” to set the hour. Press “Fan up” or “Fan down” to
set the minutes. Press the “Time/Set” button one final time to conclude the
process. NOTE: The Air Purifier and Sterilizer employ a US standard 12
hour clock.
Your Air Purifier gives you the option to start or shut
down the unit using the digital timer feature...
To set the “start” time:
Set Unit to desired functions and levels. Then turn unit off using the
“ON/OFF” switch on the front display (rear power switch remains “on”).
Press “Time/Set” button once. The “Time/Set” indicator will flash. While
flashing, use “Hour up” or “Hour down” controls to set the desired hour and
“Fan up” or “Fan down” controls for the desired minute to set the time of day
you wish the unit to automatically turn on. Press the “Time/Set” button two
final times to set the timer. The appearance of a clock icon on your LCD
panel indicates that this function has been properly set.
To set the “shut off” time:
While unit is on press “Time/Set” button once. As with previous timer
function, “Time/Set” display panel indicator will flash. While flashing, use
“Hour” and “Fan” controls to set desired hour and minute per previous
examples. Press “Time/Set” button twice to conclude this process. As
before, the clock icon appearing on the LCD panel is your indicator that this
function has been properly set.
-6-
Adjust Hour
Adjust Minute
SETTING THE CLOCK AND DIGITAL TIMER
Wrong
Correct
-5-
-6-