Levoit Classic 300S User manual

Levoit Core™ 300S
Smart True HEPA Air Purifier
Model:LAP-C301S-WAUR
USER MANUAL
Questions or Concerns?
Please contact us at [email protected].

2
Table of Contents
Package Contents
Specifications
Safety Information
Getting to Know Smart Your Air Purifier
Controls
Getting Started
Using Your Smart Purifier
About the Filter
Levoit Replacement Filters
Care & Maintenance
Troubleshooting
Warranty Information
Customer Support
2
2
3
4
5
6
7
11
12
13
15
18
18
Package Contents
1 x Smart Air Purifier
1 x True HEPA 3-Stage Original Filter
(Pre-Installed)
1 x User Manual
1 x Quick Start Guide
Specifications
Power Supply AC 220–240V, 50/60Hz
Rated Power 23 W
Ideal Room
Size
50 m²
Note:
•
rooms, but purification
will take longer.
• Ideal Room Size is
based on 2 air changes
per hour (ACH).
CADR 240 m³/h
Operating
Conditions
Temperature:
-10°–40°C / 14°–104°F
Humidity: < 85% RH
Noise Level 22–50 dB
Dimensions 22 x 22 x 36 cm /
8.7 x 8.7 x 14.2 in
Weight 2.7 kg / 5.95 lb
Wi-Fi®
Frequency
Range
2412–2472MHz
E.I.R.P: <20dBm
Bluetooth®
Frequency
Range
2402–2480MHz
E.I.R.P: <20dBm
Note: To access additional smart functions,
download the free VeSync app (see page 8).

3
SAFETY INFORMATION
• Only use your air purifier as
described in this manual.
• Do not use without removing the
plastic wrap from the filter. The air
purifier will not filter air, and may
overheat, causing a fire hazard.
• Do not use the air purifier outdoors.
• Keep the air purifier away from
water, and wet or damp areas.
Never place in water or liquid.
• Do not use in excessively humid
areas.
• Keep the air purifier away from heat
sources.
• Do not use where combustible
gases, vapors, metallic dust,
aerosol (spray) products, or fumes
from industrial oil are present.
• Keep 1.5 m / 5 ft away from where
oxygen is being administered.
• Supervise children when they are
near the air purifier.
• Do not place anything into any
opening in the air purifier.
• Do not sit or place heavy objects
on the air purifier.
• Keep the inside of the air purifier
dry. To prevent moisture buildup,
avoid placing in rooms with
major temperature changes or
underneath air conditioners.
• Always unplug the air purifier
before servicing (such as changing
the filter).
• Do not use the air purifier if it is
damaged or not working correctly,
To reduce the risk of fire, electric shock, or other injury, follow all instructions and
safety guidelines.
General Safety
READ AND SAVE THESE
INSTRUCTIONS
or if the cord or plug is damaged.
Do not try to repair it yourself.
Contact Customer Support (see
page 19).
• WARNING: To reduce the risk of
fire or electric shock, do not use
this air purifier with any solid-state
speed controls (such as a dimmer
switch).
• Not for commercial use. Household
use only.
This appliance is not intended for
used by persons (including children)
with reduced physical, sensory or
mental capabilities, or lack of
experience and knowledge, unless
they have been given supervision or
instruction concerning use of the
appliance by a person responsible
for their safety.
Children should be supervised to
ensure that they do not play with the
appliance.
Cleaning and user maintenance shall
not be made by children without
supervision.
•
•

• Keep the air purifier near the outlet
it is plugged into.
• Never place the cord near any heat
source.
• Do not cover the cord with a rug,
carpet, or other covering. Do not
place the cord under furniture or
appliances.
• Keep the cord out of areas where
people walk often. Place the cord
where it will not be tripped over.
Your Levoit air purifier complies with all
standards regarding electromagnetic
fields (EMF). If handled properly and
according to the instructions in this
user manual, the appliance is safe
to use based on scientific evidence
available today.
Power &CordElectromagnetic Fields (EMF)
4
If the supply cord is damaged, it must
be replaced by the manufacturer, its
service agent or similarly qualified
persons in order to avoid a hazard.
The attachment plug of the appliance
and receptacle serve as the manual
means for disconnecting remote
operation commands,external
communication or data signals shall
specify that unplugging the appliance
disconnects the remote functions.
•
•

5
GETTING TO KNOW YOUR SMART AIR PURIFIER
A. Fan Speed Indicators
B. Fan Speed Button
C.
D. Sleep Mode Button
E. Timer Button
F. Timer Indicator
G. Wi-Fi® Indicator
H. Auto Mode Button
I. Air Quality Indicator Rings
J.
Front, upsidedownBack
K. Check Filter Indicator
L. Display Lock Button
M. Air Outlets
N. Housing
O. Air Inlets
P. AirSight Plus™ Laser Dust Sensor
Q. Anti-Skid Pads
R. Filter Cover
S. True HEPA 3-Stage Original Filter
N P
M
O
B
C
D
E
H
I
J
K
L
R
S
A
F
G
Q

6
C O NTROLS
Button
•
• Press and hold to configure
the air purifier. See the
VeSync in-app instructions
for more information.
• Press and hold to reset the
air purifier and disconnect
from Wi-Fi (see page 8)
Fan Speed Button
• Cycles through fan speeds:
I (low), II (medium), and III
(high).
• Tapping the Fan Speed
Button while the air purifier
is in Sleep Mode or Auto
Mode will exit that mode.
Wi-Fi Indicator
•
indicate pairing status.
See the VeSync in-app
instructions for more
information.
Sleep Mode Button
• Turns Sleep Mode on
(see page 9).
• Press and hold for 3
seconds to reset the Check
Filter Indicator.
Timer Button
• Cycles through timer
options (see page 10).
• Holding for 2 seconds
allows you to cycle through
the timer options faster.
Display Lock Button
• Prevents current settings
from being changed
(see page 10).
• Blinks when any other
button is tapped to indicate
that Display Lock is on.
Auto Mode
• Turns Auto Mode on
(see page 9).
Check Filter Indicator
• Lights up when the filter
should be checked
(see Check Filter Indicator,
page 14).
• Reset the Check Filter
Indicator by pressing and
holding the Sleep Mode
button for 3 seconds.
•
page 10).
• Tap any button (except )
to turn the display back on.

7
3. Replace the filter cover and twist
clockwise to lock. [Figure 1.3]
Figure 1.3
Figure 1.4
38 cm /
15 in
cover should
snap shut
38 cm /
15 in
G E TTING S TA R T E D
1. Flip the air purifier over. Twist the filter
cover anticlockwise and remove it.
[Figure 1.1]
Figure 1.1
Figure 1.2
handle facing up
2. Remove the filter from its plastic
packaging and place the filter back into
the air purifier with the handle facing up.
[Figure 1.2]
4. Place the purifier on a flat, stable surface
with the display facing up. Allow at least
38 cm / 15 inches of clearance on all
sides. Keep away from anything that
would block airflow, such as curtains.
[Figure 1.4]

8
USING YOUR SMAR T
AIR PURIFIER
1. Plug in and tap to turn on the air
purifier. The fan will start on level I.
2. Optionally, tap to change fan speed
between I, II, and III.
Note:
• The indicators are not buttons and
cannot be used to change the fan
speed.
• The fan speed indicators will light up
when active.
• Fan speed III is the loudest, but cleans
air the quickest.
• For best results, or to address a specific
air quality issue such as smoke, run the
air purifier at high speed (level III) for
15–20 minutes before using a lower
speed.
•
and doors closed while the air purifier
is on.
3. Tap
Note: Using the VeSync app allows you to control
your air purifier remotely and access additional
functions and features.
1. To download the VeSync app, scan the
QR code or search “VeSync” in the Apple
App Store® or Google Play Store.
2. Open the VeSync app. Log In or Sign Up.
3. Follow the in-app instructions to set up
your smart air purifier.
You can use the VeSync app to connect
your smart air purifier to Amazon Alexa or
Google Assistant™. Please follow in-app
instructions to set up your voice assistant.
Note:
• To disconnect Wi-Fi, press and hold the
air purifier’s default settings and disconnect
it from the VeSync app.
• To reconnect, please follow the instructions
in the VeSync app for adding a device.
VeSync App Setup
Connect with Amazon Alexa or
Google Assistant™

9
Sleep Mode operates quietly by using a fan
speed lower than fan speed 1.
1. Tap
2.
after 3 seconds if no other buttons are
pressed.
Auto Mode uses AirSight Plus™, a smart
laser dust sensor inside the air purifier, to
adjust the fan speed automatically based on
air quality. For example, if the air quality is
bad, the fan will automatically be set to high
speed.
The air purifier is in Standby Mode when it is
Note: Display lock can be used while the
air purifier is in Standby Mode to keep the
air purifier from turning back on. The laser
dust sensor will still detect the surrounding
air quality and give you updates in the
VeSync app.
Note:
•
any button (except ) to turn the
display back on. If you don’t press
again after 3 seconds.
• The Check Filter Indicator will still turn
on and stay on if it’s time to check your
filter (see page 14).
Note:
• The air purifier will take 5 seconds
to detect the air quality each time it
is turned on. During this time, the air
quality indicator rings will be blue. After
5 seconds, the air quality indicator
rings will change color based on the
detected air quality.
• The VeSync app also supports
additional auto modes: Quiet Auto
(see page 10).
Air Quality Indicator Chart
Indicator
Color
Air
Quality
Auto Mode
Fan Speed
Blue Very Good Sleep Mode
Green Good Low
Orange Moderate Medium
Red Bad High
When the air purifier is plugged in and turned
Sleep Mode, Auto Mode, Display Lock, and
When the air purifier is unplugged and turned
speed, Sleep Mode, and Auto Mode.
Note: The air purifier will remember the last
timer setting chosen (1–12 hours), but it will not
automatically resume the timer. You will need to
reselect the timer after the air purifier is turned
back on.
Memory Function Auto Mode
Standby Mode
Sleep Mode

10
You can set a timer for 1–12 hours.
1. Tap repeatedly to select a time in
1-hour increments. When you’ve chosen
your time, the display will flash 3 times,
and the timer will start automatically.
When the air purifier is on, you can lock
the display to prevent settings from being
accidentally changed. Buttons will not
respond to being tapped.
1. Tap and hold for 3 seconds to
lock/unlock the display.
2. will light up, and will flash 3 times.
purifier, including button lights and indicator
lights (except the Check Filter Indicator).
1. Press
2. Tap any button (except or ) to
temporarily turn the display back on.
If you don’t press another button, the
3. Press to turn the display back on.
The display will stay on.
Note:
• You can change the fan speed at any
time while the timer is on.
• The timer will restart if the time is
changed.
• The air purifier will remember the last
timer will be cancelled and need to be
restarted.
• You can set a timer for 1–24 hours in
the VeSync app.
Note: The Check Filter Indicator will still turn
on and stay on if it’s time to check your filter
(see page 14).
2. When the timer is finished, the air purifier
3. To cancel a timer, tap until the display
reads “--H” and flashes 3 times.
Note:
• The timer indicator will count down
from your selected time, and the air
• Press and hold for 2 seconds to
cycle through timer options faster.
• The timer indicator cannot be used to
select a time.
• The indicator will light up when active.
Note:
• When the display is locked, will
flash 3 times if you tap other buttons on
the display.
• Display lock can still be used when the
air purifier is in Standby Mode.
TimerDisplay O
Display Lock

11
The VeSync app allows you to access
additional smart air purifier functions,
including those listed below. As the app
develops, more features may become
available.
Remote Control
• Change any air purifier settings
through the app, even while Display
Lock is on.
Timer Function
• Set a timer between 1–24 hours.
Air Quality Updates
• View real-time PM2.5 updates in the
app.
• See your air quality history for the
previous week.
Filter Replacement Info
• Keep tabs on the remaining filter life
by checking the filter life percentage
in the app.
• Shop for replacement filters.
Schedules
• Create and customize schedules
for your air purifier to match your
routines.
Auto Mode
• Access additional Auto Modes: Quiet
• Quiet Auto Mode never uses the
highest fan speed to avoid making
too much noise.
•
the size of the area you want to
purify. The air purifier will use the
highest fan speed to clean the air
in that area. Once your air is clean,
it will lower to the fan speed best
suited to the selected room size.
VeSyncApp Functions

12
ABOUT THE FI LTER
The air purifier uses a 3-stage filtration
system to purify air.
A. Pre-Filter
• Captures large particles such as dust,
lint, fibers, hair, and pet fur.
• Maximizes the filter’s life by
protecting it.
B. H13 True HEPA Filter
• Captures at least 99.97% of airborne
particles 0.3 microns (µm) in size.
• Traps small particles such as mold
spores, fine dust, smoke particles,
and allergens such as pollen, dust mites,
and pet dander.
C.
• Physically adsorbs smoke, odors, and
fumes.
• Filters compounds such as
formaldehyde, benzene, ammonia,
hydrogen sulfide, and volatile organic
compounds (VOCs).
A
B
C
Moisture may damage the filter. This air
purifier should be used in an area with a
humidity level below 85% RH. If you use the
air purifier in excessively humid areas, the
surface of the filter may become moldy.
The air change rate is how many times
all ofthe air inaroom canbe purified (or
“changed”) by the air purifier in 1 hour. Air
changes per hour (ACH) are calculatedon the
recommendedroom size assuming
2.4 m / 8 ft ceilings. For smaller rooms, the air
change per hour will increase. This air purifier
hasan air change per hour of 2,which means
it can change air 2 timesper hour atthe max
speed in a single, closed room up to 50 m².
air purification will take longer, with fewer air
changes per hour.
This air purifier has a Clean Air Delivery Rate of
240 m³/h.
Clean Air Delivery Rate (CADR) measures the
volume of clean air that an air purifier produces
per minute. This is based on removal of dust,
pollen, and smoke, which are the 3 most
common indoor air pollutants. The higher the
CADR, the more particles the air purifier will
remove and the larger the area it can clean.
The rating is measured at the air purifier’s
highest speed.
Humidity
Air Change Per Hour
Clean Air Delivery Rate
Note:
and doors closed while the air purifier is on.
Note: Water or moisture will allow mold to
grow. To solve a mold problem, get rid of
the source of the moisture and clean up the
mold. Air purifiers cannot solve an existing
mold problem, and can only remove mold
spores and reduce odors.

13
Your air purifier comes with a Levoit True HEPA 3-Stage Original Filter. You can also choose a
replacement filter with additional capabilities. Choose the filter best suited to the environment of
your home.
Best used for: allergies, dust, and light odors
odors and cooking smells.
Best used for: pet allergies, bad-smelling rooms
air pollution, cigarette smoke, vehicle exhaust, toxic gases and fumes, volatile organic
compounds (VOCs), and smoke from wildfires.
Best used for: high air pollution, smoke
Core 300-RF
Levoit True HEPA 3-Stage Original Filter
Traps fine particles such as dust, pollen, and pet dander while adsorbing common
household smells such as pet odors and cooking smells.
Core 300-RF-PA
Levoit True HEPA 3-Stage Pet Allergy Filter
Core 300-RF-TX
Levoit True HEPA 3-Stage Toxin Absorber Filter
L E V O IT R EPLACEMENT F I LT E R S

14
Resetting the Check
Filter Indicator
Reset the Check Filter Indicator when:
A. lights up red.
1. Replace the filter (see page 15).
2. Turn on the air purifier.
3. Press and hold for 3 seconds.
4.
reset.
B. The filter was changed before
lit up.
3. Press and hold for 3 seconds.
4. The will flash for 3 seconds.
5.
reset.
CARE & MAINTENANC E
Figure 3.1
will light up as a reminder to check the
filter. You will also receive a notification from
VeSync when it’s time to check your filter, and
you can view your filter life percentage in the
app at any time. Depending on how often you
use the air purifier, the indicator should turn
on within 6–8 months. You may not need to
replace your filter yet, but you should check it
when turns on.
Check Filter Indicator
Cleaning the Smart Air Purifier
• Unplug before cleaning.
• Wipe the outside of the air purifier with
a soft, dry cloth. If necessary, wipe
the housing with a damp cloth, then
immediately dry.
• Vacuum the inside of the air purifier.
• Do not clean with abrasive chemicals or
flammable cleaning agents.
Filter When to Clean How to Clean When to Replace
Pre-Filter Every 2–4
weeks
Use a soft brush or vacuum
hose [Figure 3.1]
6–8 months
True HEPA
& Activated
Carbon Filter
Do not clean
The outer pre-filter should be cleaned every
the life of your filter. Clean the pre-filter using
a soft brush or vacuum hose to remove hair,
dust, and large particles. [Figure 3.1] Do not
clean the filter with water or other liquids.
Cleaning the Filter

15
1. Unplug the air purifier. Flip the air purifier
over and remove the filter cover (see
Getting Started, page 7).
2. Remove the old filter.
3. Clean out any remaining dust or hair
inside the air purifier using a vacuum
hose. Do not use water or liquids to
clean the air purifier. [Figure 3.2]
4. Unwrap the new filter and place it into the
housing (see Getting Started, page 6).
5. Replace the cover. Plug in the air purifier.
6. Reset the Check Filter Indicator (see
page 14).
The AirSight Plus™ Laser Dust Sensor can be
accuracy. Clean the sensor every 3 months.
Using your air purifier in an environment with
more dust may mean you will need to clean
the sensor more often.
1. Unplug the air purifier.
2. Place the end of a vacuum cleaner over
the sensor openings. [Figure 3.3]
3. Turn the vacuum on for at least 10
seconds to clean out dust.
Replacing the Filter
Cleaning the AirSightPlus™
Laser DustSensor
Figure 3.2
Figure 3.3
If not using the air purifier for an extended
period of time, wrap both the air purifier and
the filter in plastic packaging and store in a
dry place to avoid moisture damage.
Storage
The filter should be replaced every 6–8
months. You may need to replace your filter
earlier or later depending on how often you
use your air purifier. Using your air purifier in
an environment with relatively high pollution
may mean you will need to replace the filter
more often, even if
You may need to replace your filter if you
notice:
• Increased noise when the air purifier
is on
• Decreased airflow
• Unusual odors
• A visibly clogged filter
When Should I Replace the
Filter?
Note:
• To maintain the performance of your
air purifier, only
filters. To buy replacement filters, visit
Levoit’s online store at levoit.com or
contact your local distributor for more
information.
• Remember to reset after changing
the filter (see page 14).

16
Problem Possible Solution
Air purifier will not turn on or
respond to button controls.
Plug in the air purifier.
Check to see if the power cord is damaged. If it is, stop using
the air purifier and contact Customer Support (see 19).
The air purifier may be malfunctioning. Contact Customer
Support (see
19 ).
Airflow is significantly
reduced.
Make sure the filter is removed from its packaging and
properly in place (see page 7).
Tap to increase the fan speed.
Leave 38 cm / 15 inches of clearance on all sides of the air
purifier.
The pre-filter may be clogged by large particles, such as hair
or lint, blocking airflow. Clean the pre-filter (see page 14).
Replace the filter (see page 15).
Air purifier makes an unusual
noise while the fan is on.
Make sure the filter is properly in place with plastic packaging
removed (see page 7).
Make sure the air purifier is operating on a hard, flat, level
surface.
Replace the filter (see page 15).
The air purifier may be damaged, or a foreign object may
be inside. Stop using the air purifier and contact Customer
Support (see page 19). Do not try to repair the air purifier.
Strange smell coming from
the air purifier.
Clean the filter, or replace if necessary.
Contact Customer Support (see 19).
Make sure not to use your air purifier in an area with high
TROUBLESHO OTING

17
If your problem is not listed, please contact Customer Support (see 19).
Problem Possible Solution
Poor air purification quality. Tap to increase the fan speed.
Make sure no objects are blocking the sides or top of the air
purifier (the inlet or outlet).
Make sure the filter is removed from its packaging and
properly in place (see page 7).
Close doors and windows while using the air purifier.
If the room is larger than 50 m², air purification will take longer.
rooms.
Replace the filter (see page 15).
is still on after replacing
the filter.
Reset the Check Filter Indicator (see page 14).
has not turned on within
8 months.
is a reminder for you to check the filter and will light up
based on how much the air purifier has been used
(see page 14). If you don’t use your air purifier often, will
take longer to turn on.
turned on before
6 months.
is a reminder for you to check the filter and will light up
based on how much the air purifier has been used (see page
14). If you run your air purifier frequently, will turn on
sooner.
Air Quality Indicator always
stays red.
The AirSight Plus™ Laser Dust Sensor may need to be
cleaned (see page 15).
If you’re using an ultrasonic humidifier near the air purifier,
Dust Sensor. The sensor will detect the large mist particles,
and the Air Quality Indicator may turn red. Avoid using an
mode besides Auto Mode.
Air Quality Indicator always
stays blue, even when the air
quality is poor.
The AirSight Plus™ Laser Dust Sensor detects airborne
particles, but it cannot detect gas. Make sure there isn’t gas
polluting the air.
Display shows Error Code
“E1”.
The motor has malfunctioned. Please contact Customer
Support (see page 19).

18
If your problem is not listed, please contact Customer Support (see 19).
V E S YNC APP TROUBLESHOOTING
ATTRIBUTIO N S
My air purifier isn’t connecting to the VeSync app.
• During the setup process, you must be on a secure 2.4GHz Wi-Fi network. Confirm that the
network is working correctly.
• Make sure the Wi-Fi password you entered is correct.
• There should be no spaces at the beginning or end of the password.
•
• If you’re manually typing in the SSID and password, double check that both are entered
correctly.
• Try moving your air purifier closer to the router. Your phone should be as close as possible
to your air purifier.
• Your router may need to be at a higher location, away from obstructions.
• Make sure your air purifier and router are away from appliances (such as microwave ovens,
refrigerators, electronic devices, etc.) to avoid signal interference.
•
• Disable portal authentication for your Wi-Fi network. If portal authentication is enabled, the
air purifier will not be able to access your Wi-Fi network, and setup will fail.
• Make sure the air purifier is plugged in and has power, then refresh the VeSync menu by
swiping down on the screen.
• Make sure your router is connected to the internet and your phone’s network connection is
working.
•
(Android™), then tap Delete. Reconfigure the air purifier with the VeSync app.
Note: Portal authentication means that you need to sign in to your Wi-Fi network through a
web page before you can use the Internet.
Note: Power outages, internet outages, or changing Wi-Fi routers may cause the air purifier
Google, Android, and Google Play are trademarks of Google LLC.
App Store® is a trademark of Apple Inc.
Wi-Fi® is a registered trademark of Wi-Fi Alliance®.
certain other countries.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and
any use of such marks by Arovast Corporation is under license. Other trademarks and trade names
are those of their respective owners.

19
WARRANTY INFOR M ATIO N
Terms & Policy
Arovast Corporation warrants all products
to be of the highest quality in material,
craftsmanship, and service for 2 years,
the end of the warranty period. Warranty
lengths may vary between product
categories.
C U S TOMER SUPPORT
If you have any questions or concerns about
your new product, please contact our local
distributor or our helpful Customer Support
Team.
Distributed by Arovast Corporation
1202 N. Miller St., Suite A
Anaheim, CA 92806
USA
Email: [email protected]
*Please have your order invoice and order ID
ready before contacting Customer Support.
Product Levoit Core 300s
Smart True HEPA Air Purifier
Model LAP-C301S-WAUR
For your own reference, we strongly recommend
that you record your order ID and date of
purchase.
Order ID
Date of Purchase

A0-N/A_22L28 au
/LEVO IT
/LEVO IT
/LEVOITLIFESTYLE
/LEVOITLIFESTYLE
/LEVOITLIFESTYLE
LEVOIT.COM