GoStand 2 Series User manual

path of the desk when it is being raised or lowered. Please also ensure any power cord used is of
sufficient length for the travel of the desk. Failure to ensure complete assembly and to also take
adequate care when using the desk could result in injury to persons and property.
In the event that any screws, power cables, allen keys or any other components or fasteners
are missing from the box when opened please contact GoStand Limited at the contact details below.
This desk is an electrical device. Keep liquids away from the electrical control box.
Do not open any of the electrical components, legs or handset. Risk of electric shock.
The desk should not be sat on nor operated with a person on the desk
This product has a duty cycle of 10%. 2 mins on 18 mins off.
In the event of loss of mains power a manual reset may be required
www.gostand.co.uk For help email: [e-mail] Page 1 of 7
replacement parts dispatched to you normally within 24 hours.
GoStand Series 2 bench Sit-Stand desk

GoStand Series 2 bench Sit-Stand desk
www.gostand.co.uk For help email: [e-mail] Page 2 of 7
Safety and warnings
Inappropriate use of this desk could cause injury to persons and property
Ensure the desk is clear on all sides before use. The desk has powerful actuators which can cause
bodily injury
Ensure the power cord is of the correct length for the maximum desk height. Similarly ensure the power
cord for any other appliance on the desk such as monitors or computers is of the correct length for
Use of the desk
This motor driven height adjustable desk is for office or home office use only. It is not designed for use in any
not be in a high moisture environment nor subject to exposure to fluids.
person on it. It should be free to move up and down wthout hinderance. Objects should not be placed below
or around the desk that can be crushed or cause the desk to jam.
GoStand Limited accepts no liability for any injury or loss caused by improper assembly or use of this product.
Similarly improper use of the product will void any and all warranty claims.
Once the desk has been assembled adjust the feet so the desk is level and stable. Then plug it in and switch it on.
frame just underneath.
it. This can cause bodily injury. Do not crawl around or lie under the desk while it is plugged in.

GoStand Series 2 bench Sit-Stand desk
www.gostand.co.uk For help email: [e-mail] Page 3 of 7

GoStand Series 2 bench Sit-Stand desk
www.gostand.co.uk For help email: [e-mail] Page 4 of 7

Assembling the bench system
Remove all the components from the box taking care not to damage any. The legs with the motors inside are heavy
and can chip paint from the other parts if they are brought together. Ensure that you have all the screws and
fasteners listed.
1. Take the support beam and set it to the desired length to suit the size of the desktop.
3. Repeat for the duplicate unit.
7. Place the desktop onto the assembled sit-stand frame and screw the top to the frame with the 4.8 x 19
self-tapping screws provided. Ensure the top is the correct way up and centered before fixing in place.
7. Fix the controller handset in place using the 3.5 x 19 self tapping screws provided. Ensure it is flush with the face
of the desk.
where the lead for the handset, motor and power lead will reach.
5. Connect the control box to the handset and to the motor. There is a set for each side of the bench. The two
sides of the bench operate completely independently.
Now the bench system is almost ready for use. Ensure nothing can obstruct the rise and fall of the desks. Ensure all
cables are long enough for the full travel of the desk. We would advise at this stage not to place anything
on the desk.
GoStand Series 2 bench Sit-Stand desk
www.gostand.co.uk For help email: [e-mail] Page 5 of 7
Plug in the desk and switch it on.

GoStand Series 2 bench Sit-Stand desk
Handset operation
3. Reset
Switch off and unplug the power cord for one minute and then replug it in and switch it on.
4. Inches or mm
Either
Or
Should you have issues with your desk please contact us and we will endeavour to help. We carry spares for
www.gostand.co.uk For help email: [e-mail] Page 6 of 7

GoStand Series 2 bench Sit-Stand desk
www.gostand.co.uk For help email: [e-mail] Page 7 of 7
Voltage: 230V AC
Weight: 70Kg
Maximum Height: 1290mm
Minimum Height: 640mm
Base Width: 1000-1600mm
Travel speed: 38m/s
Duty Cycle: 10% 2mins on 18 mins off
Maximum recommended load: 2000N
Maximum load: 1200N