New England Arbors Heartwood VA68899 User manual

Heartwood Trellis
VA68899
ASSEMBLY
GUIDE
VER 1.24 06/01/2020

GETTING STARTED
First o, allow us to say thank you for the investment you have made in our fine wood trellis. This wood trellis is designed to be
assembled and installed ideally by two people with basic carpentry knowledge and tools. Do not attempt alone, especially during
the installation stage. When assembling components, place on a non-abrasive surface (ie: shipping box) to avoid scratching.
We recommend a 15’ x 15’ area for unobstructed assembling. You should not need to use excessive force when assembling any
components.
TOOLS YOU WILL NEED
TOOLS YOU MAY NEED
CAUTION: PLEASE NOTE THAT THERE SHOULD BE
NO OTHER MATERIALS OR OBJECTS HUNG ONTO
BEAMS!
Please take the time to read this instruction guide thoroughly prior to the
construction of your wood trellis. If you have any questions, feel free to
contact our technical department by calling
North America: 1 800 282 9346 - (Mon. to Fri. 8:00 A.M. to 5:00 P.M. EST).
UK TEL: [phone] - (Mon. to Fri. 1:00 P.M. to 10:00 P.M. GMT).
WWW.NEWENGLANDARBORS.COM
WWW.NEWENGLANDARBORS.CO.UK

WWW.NEWENGLANDARBORS.COM
WWW.NEWENGLANDARBORS.CO.UK
4
5
6
7
8
9
10
11
12
13
14
15
IN THIS GUIDE
MATERIALS OVERVIEW
MATERIALS BREAKDOWN
ATTACHING VERTICAL SUPPORTS
ONTO POSTS
SCREW SUPPORT BEAMS HALF WAY
ONTO POSTS
SCREW TOP RAIL FULLY INTO PLACE
SLIDE ALL HORIZONTAL SPINDLES
UP VERTICAL SUPPORTS
SCREW BOTTOM RAIL FULLY INTO
PLACE
ATTACH THREE VERTICAL SPINDLES
TO THE TOP AND BOTTOM RAILS
ALIGN HOLES ON HORIZONTAL
SPINDLES WITH VERTICAL
SPINDLES AND SCREW INTO PLACE
INSTALLING MOUNTING POSTS
INTO GROUND A
INSTALLING MOUNTING POSTS
INTO GROUND B
GUIDE TRELLIS ONTO MOUNTING
POSTS

4VER 1.24 06/01/2020
MATERIALS OVERVIEW
1. 12035 - Post (x2)
3 3/4” x 3 3/4” x 81 1/2” (9.50cm x 9.50cm x
207.01cm)
2. 12036 - Vertical Support (x2)
3/4” x 2 1/4” x 56 1/2” (1.90cm x 5.70cm x 143.50cm)
3. 12037 - Vertical Spindle (x3)
3/4” x 1 1/2” x 56 1/2” (1.90cm x 3.80cm x 143.50cm)
4. 12040 - Horizontal Spindle (x4)
3/4” x 1 1/2” x 52 1/4” (1.90cm x 3.81cm x 132.62cm)
5. 12041 -Top And Bottom Support (x2)
3/4” x 1 1/2” x 53” (1.90cm x 3.81cm x 134.62cm)
6. 12038- Beam (x2)
3/4” x 5 1/2” x 78” (1.90cm x 13.97cm x 198.12cm)
1
2
3
4
5
6
53”
(134.62cm)
60 1/2”
(153.67cm)
81 7/8”
(207.96cm)
76 3/8”
(194cm)
78”
(198.12cm)
5 1/2”
(13.97cm)
5 1/4”
(13.30cm)

VER 1.24 06/01/2020 5
MATERIALS BREAK DOWN
1
6
2
3
4
5
12035  POST
X2
20057  BOLT 6”
15CM X2
FLAT WASHER X4
NUT X2
12036  VERTICAL
SUPPORT
X2
12038  BEAM
X2
12037 
VERTICAL SPINDLE
X3
12040 
HORIZONTAL SPINDLE
X4
12041 
TOP AND BOTTOM
SUPPORT
X2
20037  SCREW A
1 1/4” 3.18CM X12
20058  JOINT
CONNECTOR BOLT
AND NUT X18
1” 3CM
80021  MOUNTING
POST
X2
7
8
9
12
13
14
10
11
80022  POUND
CAPX2
ALLEN KEY X2
20063  SCREW B
1 3/4” 4.5CM X4
12
SOCKET DRIVE
X1
15
WRENCH
X1

6VER 1.24 06/01/2020
Step 1
1 1/4” 3.18CM  X12
10 1/4
(26cm)
ATTACHING VERTICAL SUPPORTS TO
CENTRE OF POSTS
When installing the verticle supports, make sure the front of each verticle support is
facing each other!

VER 1.24 06/01/2020 7
Step 2
SCREW SUPPORT BEAMS HALF WAY ONTO POST
6” 15CM
X2
X4X2

8VER 1.24 06/01/2020
Step 3
SCREW TOP RAIL FULLY INTO PLACE
512041 X1
1 3/4” 4.5CM X2

VER 1.24 06/01/2020 9
Step 4
SLIDE ALL HORIZONTAL SPINDLES UP
VERTICAL SUPPORTS
Your spindles will be loose, dont worry. They will be
screwed in place in a later step!
412040 X4

10 VER 1.24 06/01/2020
Step 5
SCREW BOTTOM RAIL FULLY INTO PLACE
512041 X1
1 3/4” 4.5CM X2

VER 1.24 06/01/2020 11
Step 6
ATTACH THREE VERTICAL SPINDLES TO
THE TOP AND BOTTOM RAILS
1” 3CM X6
312037 X3

12 VER 1.24 06/01/2020
Step 7
1” 3CM X12
ALIGN HOLES ON HORIZONTAL SPINDLES
WITH VERTICAL SPINDLES
You may stand the trellis up for this step

VER 1.24 06/01/2020 13
Step 8A
INSTALLING MOUNTING POSTS INTO GROUND
With your trellis fully assembled and laying flat on the ground.
Put each of your mounting posts at the end of each trellis post,
positioned in the middle. This is crucial that your installing your
trellis on flat ground and both mounting posts are equally in the
middle of each post.
BOTTOM OF
TRELLIS POST
TRELLIS POST
OPENING
MOUNTING
POST
GROUND

14 VER 1.24 06/01/2020
Step 8B
INSTALLING MOUNTING POSTS INTO GROUND
MOUNTING POST
POUND CAP
18”
45.72 CM
18”
45.72 CM
18”
45.72 CM
18”
45.72 CM
GROUND
MOUNTING POST
When in position with your pound caps on the posts, hammer each
post 18” (45.72cm) into the ground. Remove your pound caps.
18”
45.72 CM

VER 1.24 06/01/2020 15
Step 7
GUIDE TRELLIS ONTO MOUNTING POSTS
Make sure to have a helper for this step

16 VER 1.2406/01/2020
We’re here
for you.
If you have any questions at all,
don’t hesitate to contact us.
NORTH AMERICA TOLL FREE
18002829346
UNITED KINGDOM
44 2038 687160
Visit our website to chat with a support technician.
WWW.NEWENGLANDARBORS.COM
WWW.NEWENGLANDARBORS.CO.UK