Sunjoy L-GZ093PST User manual

1
Summer Veranda Gazebo
Style # L-GZ093PST
DPCI # 009/05/0118
Product Size identification: 10’L x 10’W (Between two posts) x10’H
Recommended persons for safe assembly: 3.
CONGRATULATIONS – You’ve purchased a fine item from Target.
Our clear, easy to follow; step by step instructions will guide you through the
project from start to finish. Feel confident that this will be a fun and rewarding
project. The final product will be a quality piece that will go together smoothly
and give years of enjoyment.
All you will need is a screwdriver, a hammer, and a ladder at least 8.2 ft.
high (or 2.5m).
If you have any questions, just call 866-578-6569. Please refer to the DPCI
code above when calling.

2
WARNING:
This unit is heavy and big. Do not assemble it alone.When assembling and using
this product, basic safety precautions should always be followed to reduce the risk of
personal injury and damage to equipment. Please read all the instructions first.
Keep all children and pets away from assembly area. Children should be supervised
when in the area of gazebo construction.
Some parts may contain sharp edges, wear protective gloves if necessary.
Keep assembly area at least 6 feet away from any obstruction such as fence, garage,
and house, overhanging branches, laundry line or electrical wires.
This is for outdoor use only. Install it on level ground.
Keep all flame and heat sources away from this gazebo. The fabric meets CPAI-84
specifications for flame resistance but it’s not fire proof. It may burn if being left in
continuous contact with any flame source. The application of any foreign substance to
the gazebo fabric may render the flame-resistant properties ineffective.
Check all nuts and bolts for tightness before and during usage.
Step Identification For ease of identification
all parts
are labeled to correspond to the
Step number in which the part is
used.

3
4 pieces 1A Left Frame
4 pieces 1B Right Frame
4 pieces 1C Column
1 piece 2A Center
fitting for the
second roof
1 piece 2B Hook
4 pieces 2C Short bar for the second
roof
4 pieces 2D
Medium bar for the
second roof
4 pieces 2E Long bar for the second
roof
1 piece 3A
Canopy for the second
roof
1 piece 3B Top center fitting
4 pieces 3C Top roof connector
1 piece 3D Canopy for top roof
1 piece 3E Mosquito net
40 pieces 3E1 Plastic ring for mosquito
net
Parts List

4
Hardware
Identification
For ease of identification, all
hardware is
organized into
separate hardware packs as below.
Actual size is not shown below.
28 pieces (AA) M6×20 screw
TBZ01406020HQ
28 pieces (BB) M6 flat washer
TBZ10806HQ
Hardware Pack 1
8 pieces
(CC) M6
×
40 screw
TBZ00306040HQ
8 pieces (BB) M6 flat washer
8 pieces (DD) M6 nut
TBZ20106HQ
1 piece (WW) M6 wrench
12 pieces (GG) Peg
TBZ10608180HQ
Hardware Pack 2
4 pieces (CC) M6×40 screw
TBZ00306040HQ
4 pieces (BB) M6 flat washer
TBZ10806HQ
4 pieces (DD) M6 nut
TBZ20106HQ
1 piece (HH）Touch up paint
Hardware Pack 3

5
Fig.3: Attach the arches formed above onto four columns, using screwsAA
and washers BB, to get a complete frame.
STEP #1
Frames and arches
(x28) (AA)
(x28) (BB)
Fig.1
，
Fig.2: Insert each 1A into each 1B to form four arches for four
sides all around, and secure them with screws AA, and washers BB.

6
Warning: Please peg the frame on the ground before going on to
the next step. The next step will require a ladder.
STEP #2
Top bars
(x 8) (CC)
(x 8) (BB)
(x 8) (DD)
(x 1) (WW)
(X12) (GG)
Fig.4: Insert 2D into 2C;
Fig.5: Screw 2B into 2A, and insert 2C and 2E into 2A separately;
Fig.6: Connect the other end of 2E with the arches, using screws CC, washers BB and nuts DD to secure.
Fig.7: Fix the other end of 2D with the posts, using screws CC, washers BB and nuts DD to secure.

7
Fig.8: Put 3A onto the top roof. Do not complete it
here in order to assemble the second roof.
Fig.9
：
Insert 3C into 3B, and then use screws CC, washers BB and nuts DD to secure 3C and the bars
on the second roof.
Fig.10
：
Complete fitting the top canopy 3D. Fig.11: Fit the second canopy 3Acompletely.
Fig.12
：
Attach mosquito net 3E onto the round
bars on 1Aand 1B, using 3E1.
STEP #3
Top roof, canopy and mosquito net
(x 4) (CC)
(x 4) (BB)
(x 4) (DD)

8
Our steel components for garden accessories and furniture are treated with rust inhibiting
paint that protects it from rusting.
Care & Maintenance
However, due to the nature of steel, surface oxidation
(rusting) will occur once these protective coatings are scratched. This is a natural process
and is not a defect! To minimize this condition, we recommend care when assembling &
handling the product to prevent scratching the paint. Should any scratching or damage
occur, we recommend immediate touch-up with rust inhibiting paint, which is included in the
package (For Target Store orders only). Surface rust can also be easily removed with a very
light application of common cooking oil. If surface oxidation (rusting) occurs and if no
measure is taken to prevent this, the oxidation may start dripping on to deck or patio and
cause damaging stains, which may be difficult to remove. This can be prevented if the
measure is taken to keep the product from oxidizing.
This limited warranty is extended to the original purchaser and applies to defects in
materials and workmanship of your item, provided the item is maintained with care and used
only for personal, residential purposes.
The item is warranted to be free from defects in material or workmanship for a period of 1
year. However, we don't reimburse for transportation or delivery costs, or compensate the
individual or any outside party for assembling or disassembling the product.
Limited Warranty
Exclusions: Items used for commercial, contract, or other non-residential purposes, or
items damaged due to acts of nature, vandalism, misuse, or improper assembly are not
covered. Corrosion or rusting of hardware is not covered. Proof of purchase (dated register
receipt) is required for warranty claims. Warranty is to the original purchaser and is
non-transferable. Any replacement of warranted items will be in the original style and color,
or a similar style and color if the original is unavailable or has been discontinued. As some
states do not allow exclusions or limitations on an implied warranty, the above exclusions
and limitations may not apply. This warranty gives you specific rights, and you may also
have other rights, which vary from state to state.
IMPORTANT: Please do not return this product to the store. For technical assistance on
assembly or replacement parts, please do not return this product to the store, call Sunjoy
Industries at 866-578-6569 from 8:30 AM to 5:30 EST Monday to Friday or fax the
replacement part form which is included in the package to 740-283-3549 or
Email [email protected] for assistance.