New Holland BNAC658HB User manual

operation manual
BNAC658HB
BNAC708RB
BNAC908HB
WHEELED AIR
COMPRESSOR

2
table of contents
Introduction
4 Using the Operators Manual
Specifications
4 Specications
Product Identification
5 Record Identication Numbers
Safety
6 Safety Instructions
7 Safety Rules
7 Hazard Symbols and Meanings
10 General Safety Information
Safety & Installation
11 Spraying Precautions
11 Hose Precautions
11 Installation and Location
11 Extension Cords
Assembly Instructions
12 Assembly
Product Features
13 Automatic ON/OFF
13 Regulator
13 Tank Pressure Gauge
13 Safety Valve
13 Tank Drain Fitting
13 Safety Guard

3
table of contents
Operating Instructions
14 Initial Start Up
14 Start Up
14 Storage
14 Shut Down
Maintenance
15 When performing any maintenance or service
15 Daily
15 Weekly
15 Monthly
15 Six Months or 250 Operating Hours
15 Oil Change
Troubleshooting
16 Troubleshooting Chart
Parts
17 NAC708RB/NAC658HB Parts Diagram and List
18 NAC908HB Parts Diagram and List
19 NAC708RB/NAC658HB Pump & Parts List
21 NAC908HB Pump & Parts List
Warranty
23 Warranty Statement
Notes
27 Maintenance Notest

4
Using the Operator’s manual
Thank you for choosing our compressor. The manual gives information
with respect to operation and maintenance of the Compressor and be
sure to read it carefully rst before operation.
Following the manual can ensure the user’s safety and get the best
results from the compressor. All information and diagrams in this manual
are in accordance with the newest products at the publishing time. We
strive for accuracy and this manual is accurate for the models described
at the time of printing. We reserve the right to make improvements or
changes at any time without notice or obligation.
Please keep this manual with the engine permanently, even if the engine
ownership is transferred.
Attention: Read through the complete manual
prior to the initial use of your compressor.
introduction

5
product identification
Record Identification Numbers
COMPRESSOR
If you need to contact an Authorized Dealer or Customer Service line for
information on servicing, always provide the
product model and identication numbers.
You will need to locate the model and serial number for the machine and
record the information in the places provided below.
Date of Purchase:
Dealer Name:
Dealer Phone:
Product Identification Numbers
Model Number:
Serial Number: