New Works Kizu User manual

Assembly & Care Guide
Kizu Table Lamp
[email protected] Frederiksgade 1, Ground Floor, 1265 København DK www.newworks.dk
e Kizu Table Lamp is carefully made and therefore every item is unique.
It may occur dierent expression in the material and surface, with smaller marks and minor deviations.
SAFETY INSTRUCTIONS
Please read the instructions carefully and retain it for future reference. New Works Aps is not responsible for any
faults or damages caused by not following the instructions correctly.
e lamp is only intended for indoor use, consult a professionally qualied electrician if any doubt.
Follow the guidance:
Kizu Table Lamp, Small - 220-240V~ 50/60Hz - E14 LED Max 7W (Dimmable bulb only).
Kizu Table Lamp, Large - 220-240V~ 50/60Hz - E27 LED Max 11W (Dimmable bulb only).
e light bulb and lamp exterior may get hot after prolonged use.
Turn o the power (unplug from wall outlet) before replacing the bulb. Make sure the bulb has sucient time to
cool down. Do not subject the lamp to any shock as this may cause the lamp to brake.
Keep the product out of children’s reach. Dispose the packaging and do not allow children to play with it.
Do not modify the product in any way.
CLEANING
Turn o the electricity before cleaning the lamp. Wipe the lamp excterior with a soft dry or moist cloth. Do not
use any abrasive cleaning tools, and never use strong cleaning agents such as household glass cleaner, white spirit, or
turpentine.
MORE INFORMATION
For more information such as product overview, material description and disclaimers - please visit our website at
www.newworks.dk for further information. If you have any questions or comments, please do not hesitate to con-
tact us at [email protected].

Assembly & Care Guide
Kizu Table Lamp
[email protected] Frederiksgade 1, Ground Floor, 1265 København DK www.newworks.dk
Read the instruction carefully and turn o electricity at main circuit breaker panel before beginning the installation.
Warning all wires are connected - when unpacking the box, be careful not to pull wires, as this may result in a bad
connection. Do not connect the electricity until the lamp is fully assembled.
ASSEMBLY INSTRUCTIONS
1. Place the lamp on a levelled and stable surface - Make sure only to lift the lamp by its base.
Insert the shade into the top of the base, then turn it ve times to the right (anticlockwise).
2. en, turn the shade the opposite direction (clockwise) until it is mounted correctly. Make sure not to turn
it too hard, as this could break the lampshade.
3. Install the light bulb - Make sure only to use one of the approved bulb types - E27 Light Bulb, LED Max 11W
/ E14 LED max 7W Dimmable bulb only (Not included)
4. Place the Acrylic lid on top and connect to electricity.
5 x Anticlockwise Clockwise