Newacalox R8 Series Instruction Manual

NEWACALOX Magnetic Soldering Helping Hands R8 Series
Notice
Thank you for choosing our product! To ensure proper and safe functioning of the product,
please read the manual carefully before use. Please always follow these instructions for safe
usage.
If you have any questions about the product or experience any problems, please contact us. We
will be happy to serve you.
Keep this manual for future reference.
Technical information
Model
N-AGR9
Color
Black
Base Material
Iron
Base Dimension
25*20 cm(10”x8”)
Base Weight
4.4 Lbs
Base Thickness
6 mm
Universal Joint Pipe Material
Iron
Universal Joint Pipe Length
310mm(12.2”/5.9”)
Absorption
Magnetic

Packaging contents
Iron Base
1 piece
Hot air gun holder
1 piece

PCB Board Fixed Clips
1 piece
Universal Joint Pipe（310mm）
3 piece
Alligator Clips
3 piece
Non-slip Rubber Feet
4 pieces
Rotating bracket
1 piece
Lamps
1 piece
Technical information
Model
4AB1-OE
Color
black
Base Material
Iron
Base Dimension
23*15 cm(9.05”x5.9”)
Base Weight
2.6 Lbs
Base Thickness
4.2mm
Universal Joint Pipe Material
Iron
Universal Joint Pipe Length
310mm (12.2”)
Absorption
Magnetic
Packaging contents
Iron Base
1 piece
Universal Joint Pipe（150mm/310mm）
4 piece
Alligator Clips
4 piece
Non-slip Rubber Feet
4 pieces

Technical information
Model
N-AGR8-BK9
Color
Black
Base Material
Iron
Base Dimension
25*20 cm(10”x8”)
Base Weight
2.6 Lbs
Base Thickness
4.2mm
Universal Joint Pipe Material
Iron
Universal Joint Pipe Length
310/150mm(12.2”/5.9”)
Absorption
Magnetic
Packaging contents
Iron Base
1 piece
Hot air gun holder
1 piece
PCB Board Fixed Clips
1 piece
Universal Joint Pipe（150mm/310mm）
4 piece
Alligator Clips
4 piece
Non-slip Rubber Feet
4 pieces
Warning
Compare the parts with the package contents. If you are missing a part, please contact us by
email: [e-mail].
For the overall installation, please refer to the installation video on the Amazon sales page.
☒Do not leave packaging material lying around carelessly. These may become dangerous playing
material for children. Do not dispose of the packing materials until the product is installed.
☒When picking up the auxiliary hand, pay attention to hold it firmly, so as not to fall off and

hurt.
☒Please keep the surface clean and dry when using it. Moisture or debris will reduce the
suction
T r o u b l e s h o o t
Failure phenomenon
Causes
Elimination method
alligator clip falls off
The clamped data board
exceeds the weight that the
clamp can bear
Reduce the weight
The screw of the alligator clip
is loose
Tighted the screw
Alligator clip Loose
The clip is not in place
Clip more place
The product is damaged
please contact us
No suction
Magnet is missing
please contact us
Magnet is broken
Replace one,please contact us
Operation method
1. Install the hot air gun holder: Open the accessory package, take out the pattern screws, install
them on the iron pipe, and align the screw holes to tighten.
The circular metal ring is placed at the bottom of the iron pipe, which is used to adjust the height
of the holder and fix it.
2. Easy to install.
Remove the packaging of the base, put the flexible arm on the iron plate, and you can start your
welding work.
3.360°rotation Flexible Arm, adjustable fixed position
Take out the mother board that needs to be repaired, adjust the position and direction of the
flexible arm, and fix PCB with an alligator clip. The flexible arms have the right amount of rigidity
so they'll stay in place yet reposition easily and without any springiness. There's a thumbscrew to
change the angle of the alligator clips without having to twist the base.
4. Each of the spring clamps has thick heat shrink tubing covering the jaws, which works like
rubber protection, avoiding damage to the parts you working on.
Cleaning and care
1. Under no circumstances use aggressive cleanings agents, cleaning alcohol, or other chemical
solutions since these can penetrate the housing or impair functionality.
2. Clean the product with a dry, microfiber cloth
3. Should the alligator become loose, it can be easily tightened again.