Newbealer NV8530A User manual

MICROCRYSTALLINE
BLACKHEAD
SUCTION REMOVER
NV8530A
USER MANUAL
Please read this manual carefully before
using and keep this in a safe place for
future reference.

- 01 -
● Please use a hot steamer or a hot towel for
3-5mins prior to use to open pores.
● Before using it, please make sure the
sponge has put into the filter cup and the
sponge must be dry or the liquid will damage
the device.
● Please don't press the probe firmly on your
skin, the machine has strong suction.
● Do not leave the Blackhead Remover on a
single spot on your skin for longer than 2
seconds. This may lead to redness/bruising
on the skin.
● Starting from your chin, move the head of
the Blackhead Remover out towards your
cheeks. Use on the forehead area and move
it from the middle to both sides. Use on
T-area and move from the bottom up.
● Do not place or drop into water or other
liquid.
● The probe with microcrystalline particle
needs to be used according to your skin, once
a week for the dry skin, twice for the oily skin
or mixed skin, within 5 minutes every time.
● Do not use it while bathing or in the shower.
● Please do not use scrub cream or exfoliator
before or after skincare.
● Please pay more attention to moisturizing
and sun care after skincare.
Safety Instructions

● 3 levels, suitable for all kinds of skin.
● Gentle care, 4 types of suction head
optional
● With various functions, it can clean
pores, remove blackheads and tighten skin
● Using vacuum suction technology, gently
lift and massage the skin to avoid hurt，
keep skin firm and elastic.
- 02 -
Function
● Do not use the device over any scar or
wounds on your skin.
● After skincare, the skin may feel a little
tingling and flushed because of blood
circulation, it is normal and it will fade away
within 30 minutes.
● This product is not for people who disable
on physical, sensory or mental or lack
experience or knowledge (including children)
and it must have a guardian from next to
monitor and to guide the use of our products
and can bear the responsibility.
● This product is not suitable for body parts
which had have cosmetic or rhinoplasty
operation, pregnant women, heart patients,
also not suitable for use.

Strongest suction for stubborn
blackheads, acne, and grease,
suitable for dry skin.
Large Round Silicone
Suction Head
4 Replaceable
Working Probe
On/Off Switch
Level Indicator
Charging Indicator
Body Charging
Base
USB Charging
Interface
Low
Mid
High
- 03 -
Product details
Differnet suction heads

Gentle suction for the thin,
tender, sensitive skin to
clean dirt.
1. Insert a dry filter sponge
inside the filter cup as
shown.
Small Round
Suction Head
Remove blackheads and clean dirt
High adsorption for exfoliating
keratin and dead skin, makes
the skin delicate glow young and
bright. Suitable for all types of
skins.
Microcrystalline
Beauty Suction
Head
Medium suction for blackheads,
acne and grease. Suitable for
oily skin. Also used to remove
fine lines & increase skin
elasticity.
Oval Suction
Silicone Head
2. Choose appropriate suction
head according to your skin and
install it.
Operation and Use

7. Slowly move the suction
head on the blackhead area.
8.Use the machine to slide in
the horizontal direction instead
of the vertical direction, avoid
pulling the skin.
3. Use a hot steamer or a hot
towel for 3-5 minutes to open up
your pores.
4. Apply a cotton pad dripping
with the derived solution to the
blackhead area for 3-5 minutes.
5. Long press the button for
1.5s to switch it on.
6. Short press the button to
choose suitable level for your
skin.
- 05 -

9. Keep the suction head on the
same spot for 1-2s to suck
blackhead or acne out. Repeat
the operation.
1. Replace with oval head.
11. Clean your face with
water.
12. Apply cool mist steam or
appropriate mask to shrink
pores.
2. Long press the button for
1.5s to switch it on.
10. Long press this button
for 1.5s to turn it off.
- 06 -
Lift skin, smooth fine lines

3. Short press the button to
choose suitable level for your
skin.
5.Repeat the operation several
times in the direction indicated
by the arrow.
6. After use, long press the
button to switch it off.
7. When charging, the two
holes at the bottom should
be aligned with the two
convex points at the base.
4. Move the device in one
direction, once it suctioned
please pull it away after 1-2s.
Microcrystalline blackhead remover Model: NV8530A
Net Weight: 7oz (200g)
Input Voltage: 5V 1A
Dimension:7.7*2.6*1.8in
Current: 0.6A
Suction Power: 53Kpa-65Kpa
Battery Capacity: 500mAh
- 07 -
Specifications

1. Please use the supplied USB cable to
connect the unit for charging. When the
charge gets low (the indicator flashes red),
you should charge the device by placing it in
its charging base.
2. The charging indicator lights red while the
battery is charging and changes to blue
when charging is finished. It takes about one
hour for a 100% charge and is enough for
1-hour continuous usage.
3. Built-in 500 mAh rechargeable battery can
be used for 1-hour continuously on a single
charge and it's easy to charge through USB
interface at anytime and anywhere.
4. After use, you can take off the suction
head and clean it with a cotton swab.
5. Filter sponges should be cleaned after
each use and can be changed after using
the device for a longer period of time, or
when it is too dirty to be cleaned.
6. Please stop using this unit if the shell is
damaged or a malfunction occurs in the
mechanical and electronic components.
7. Please store this unit in a cool and dry
place, away from sunlight.
8. The Blackhead Remover can be wiped
down with a dry or damp cloth. Please don't
- 08 -
Maintenance

Warranty Details
- 07 -
Maintenance
rinse it with water and use corrosive
solutions (such as alcohol, gasoline, nail
polish remover, etc.) to wipe the body,
which may damage the device.
9. Do not disassemble the machine without
permission.
10. Unplug the charging cable before
using, cleaning or repairing the unit.
11. Before using the device, please make
sure the suction head and filter sponge are
dry.
12. In order to avoid environmental
pollution, the machine is not allowed
randomly discarded.
13. Please avoid any collision to prevent
damage to the device.
Thank you for selecting a Newbealer
product! Enjoy a warranty for the black-
head remover for one year.
If you experience any issues with this
product, or its performance is not what you
had expected, please contact us.