miseno MM5636SLED User manual

MODEL:
MM2432SLED
LED LIGHTED MIRROR
USER GUIDE

IMPORTANT SAFETY INFORMATION
WARNING
This product must be installed in accordance with the installation instruction by
qualified technician. Failure to follow instruction could result in death or serious
bodily injury.
Please read through this installation instruction so you will know how to install
and operate your model properly. Keep this document in a safe place for future
reference after use.
CAUTION
This product must be serviced by qualified personnel. ALWAYS unplug the power
cord or turn off the circuit breaker before service.
PACKAGE CONTENTS
2
(MM2432SLED x 1)
(x1)
Mirror
Mounting Bracket Screw Drywall Anchor
Customer Service: 855.480.2915 | [email protected]
(MM2432SLED x 4) (MM2432SLED x 4)

INSTALLATION
For drywall installation,
mark the hole locations and
drillɌ6mm holes for the
drywall anchors.
Insert provided drywall
anchors.
Install the mounting bracket.
Connect to 110V power
supply.
Hang the mirror to the wall and
make sure the bracket in the
back of the mirror lineup with
the mounting bracket properly.
Press the mirror down
slightly and make sure the
brackets fit properly.
3
•Using the wall studs to hang the mirror is highly recommended.
Customer Service: 855.480.2915 | [email protected]

INSTALLATION DIMENSIONS
4
Customer Service: 855.480.2915 | [email protected]
Model# A B C
MM2432SLED 24 32 1 5/8
C
A
B

BASIC OPERATION
5
Customer Service: 855.480.2915 | [email protected]
1. Touch switch
a. Press the switch once to turn on/off the LED lights.
b. When the lights are on, press and hold the switch for about 3 seconds
to change the color temperature.