Newell Rubbermaid pelouze DYMO P100S User manual

by
MODEL P100S 100 lb Mechanical Shipping Scale
MODEL P250S 250 lb Mechanical Shipping Scale
USER GUIDE

DYMO by Pelouze Mechanical Shipping Scale
Your new Mechanical Shipping Scale weighs
items in one pound increments. This User Guide
provides instructions for using the scale.
Locking and Unlocking the Scale
The scale is equipped with a Memory Lock™
lever. When an item being weighed extends
over the front of the scale and you cannot see
the display, you can lock the display using the
Memory Lock lever.
The scale is shipped with the Memory Lock
lever in the locked position.
Unlock the scale before placing an item on the scale or turning the adjustment knob.
To unlock the scale
♦ Push the Memory Lock lever up.
To lock the scale
♦ Push the Memory Lock lever down.
The scale display now remains locked in position until you unlock the scale.
Adjusting the Scale to Zero
Complete the following procedure before using the scale for the first time.
To adjust the scale to zero
1. Place the scale on a firm, flat surface.
2. Turn the adjustment knob until the indicator line aligns with zero on the scale display.
Perform this procedure from time to time to ensure the scale continues to produce accurate
readings.
Using the Scale
Always make sure that the indicator line is aligned with zero on the scale display before
placing an item on the scale platform. If the indicator line is not aligned correctly, adjust the
scale as described in “Adjusting the Scale to Zero”.
To weigh an item
♦ Place an item on the scale platform.
Memory Lock lever
Adjustment
knob
!

Caring for the Scale
With proper care and handling, your scale will give you years of service. Keep the following in
mind when using your scale:
• Your scale works best when operated and stored at normal room temperature. Avoid
lengthy exposure to extreme heat or cold.
• Only operate the scale on a stable, vibration free surface.
• Exposure to dust, dirt, moisture, vibration, and air currents can affect the reliability and
accuracy of your scale.
• Although this scale is designed to be quite durable, gently place items to be weighed on the
platform. Avoid rough treatment, as this may permanently damage the scale and void your
warranty.
• You can permanently damage the scale by placing significantly overweight items on the
scale platform.
• Avoid shaking, dropping, or otherwise shocking the scale. This is a precision instrument and
MUST BE HANDLED WITH EXTREME CARE.
Technical Specifications
For information about our other scale products, visit www.dymo.com. To obtain support,
contact Technical Support at [phone]. You can also obtain support at www.dymo.com.
Warranty
Your DYMO® Scale comes with a warranty against defects in materials, design, or workmanship, for one year from the
original date of purchase, when used in accordance with all operating instructions. Normal wear and tear is not covered,
nor is excessive use, abuse or damage caused by a user either intentionally or accidentally.
EXCEPT AS PROVIDED HEREIN, DYMO MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, AND DYMO SPECIFICALLY
EXCLUDES WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DYMO’S LIABILITY UNDER
THIS WARRANTY SHALL BE LIMITED TO REPAIR OR REPLACEMENT OF THE SCALE. DYMO SHALL NOT BE RESPONSIBLE FOR
ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES, WHETHER OR NOT FORESEEABLE.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE
TO STATE AND COUNTRY TO COUNTRY.
In the event of a product failure, please visit www.dymo.com/support or contact DYMO Technical Support to obtain a
Return Material Authorization (RMA) number and further instructions to return your product.
Model Capacity Resolution Units Operating Temperature
P100S 100 pounds 1 pound pounds 32° - 104° F (0° - 40° C)
P250S 250 pounds 1 pound pounds 32° - 104° F (0° - 40° C)
© 2008 Sanford, L.P. All rights reserved. Revised 09/08.
No part of this document or the software may be reproduced or transmitted in any form or by any
means or translated into another language without the prior written consent of Sanford, L.P.

Produced by:
DYMO, Stamford, CT
800-426-7827: www.dymo.com
© 2008 Sanford, L.P.