Newfeel F4 Series User manual

I
F4 Series 4 Head Animation Laser Light
User Manual

II
Thank you for using the 4 heads animation laser projector. For the sake of safety and better operation of this projector,
please read this manual carefully before use and operation, lest incur any personal injury or damage to the projector
●Package list:
When you unpack the case, please take time to examine the items as follows:
········RGB animation laser projector 1 pc
········Power cord 1 pc
······· User manual 1 pc
Warning!!!Do not look straight at the light source when the light is on
● technical parameters：
Rated Voltage: AC100V~230V 50~60Hz±10%
Power consumption: 300W max
Laser modulation: analog modulation
Laser wavelength: R638nm，G520nm，B450nm
Laser power: RGB6000mw*4PCS
Laser color: RGB
Scan system: ±20K *4pcs
Control mode: DMX512，music，automatic，master&salve
Working environment: indoor
working temperature: －10°C~45°C
● menu setting：
Display instruction:
menu
Function
auto
Dmx-512
little-endian
Color setting
DMX step
version，speed
Up
Numbe
r
increas
e
Axxx,
change
number
to select
the speed
dxxx,
Change
Number
To set
th
e
Address
Setx，
0：positive，
1：negative
Cxx,
0：TTL
1：TTL
enhanced，
2：
RGB,analog
color
S. xxx，0：
dmx follow
good ，the
bigger the
number is，
dmx will be
more
smooth.
Vx:V the number
means version
number.
The third means
function.
The fourth means
speed
Dow
n
Numbe
r
decrea
se
confirm
After a few seconds of confirmation,the current value of the setting will be stored
If the function is changed, the second dot will flash, and the second dot will stay on when
MENU UP DOWN ENTER

III
you press ok.After a few seconds, the state is saved and the second dot goes off.
If the parameter is changed, the third dot will flash. After pressing the ok key, the third
dot will stay on.After a few seconds, the state is saved and the third dot goes off.
function
automati
c
Setting
dmx
addr
ess
The scan heads
of 6 sets are
arranged
directionally ,
0: address
code small end
arrangement,1
: address code
big end
arrangement
Different
graphs have
corresponding
values.Specific
reference
actual effect, it
is good to use
default value
commonly
The default is
0, and the
performance
is more
focused on
brightness.
If you pay
more attention
to color
expression,
please choose
2, of course,
the overall
color
brightness will
be a little
lower.
This is just for
identification.Para
meters are fixed
and not
adjustable.
The third part:
A means walk with
it, d means walk
without it
Fourth note:
3 represents 30K
and above,
respectively 1
represents
10-15k, and 2
represents
20k-25k
● channel mode：
Total is 4 heads，below is channel of each head, total is 72 CH：
（if address code is 1：so the first channel of first head is 1. the first channel at the second head is 19. the first channel of third head is
37，the first channel of fourth head is 55.
Ch1 allColor
0 - 255
0 - 100%
Total dimming
Ch2 Red
0 - 255 Red
0 - 100%
Ch3 Green
0 - 255 Green
0 - 100%
Ch4 Blue
0 - 255 Blue
0 - 100%
Ch5 Pan Coarse
0 - 255 Pan MSB
X moving
To center the graph, the
channel value should be set
to 128 by default.If the
channel value is 0, the
image is on the side. If it is
outside the display range, it
is closed.
Ch6 Pan Fine
0 - 255 Pan LSB
X fine tuning
Ch7 Tilt Coarse
0 - 255 Tilt MSB
Y moving
Ch8 Tilt Fine
0 - 255 Tilt LSB
Y fine tuning
Ch9 Off / Dot / Gobo
Gobo 0 – 255
Every 3 value
select one
pattern
Ch10 Zoom
0 - 127 Gobo size
Pattern size
0 the biggest，127the
smallest
128-191
From small to big
191 is the slowest
192-255
From big to small
192 is the slowest
Ch11 Strobe
0-4 Stobe off Strobe
effect
No strobe

IV
5 - 255 Strobe speed
strobe
Ch12 rotate
0 - 127 Gobo rotate
rotation
128-191
Clockwise
rotation
191 is the slowest
192-255
Anticlockwise
rotation
192 is the slowest
Ch13：Color
0-3
Fix color
4-6
Light off
7-9
white
10-127
Color select
128-255
Corresponding
color palette
table 64 color
(solid color)
Ch14：Drawing
0-127
Gradually in
128-255
Gradually out
Ch15：DrawColor，need
to use with “Drawing”
channel will work well.
0-3
Solid color
4-6
Light off
7-9
white
10-127
Color select
128-255
Corresponding
color palette
table 64 color
(solid color)
CH16：X wave
0
No wave
1-63
Small wave
64-127
Big wave
128-191
Small
wave/speed
Auto wave effect
192-255
Big wave/speed
Auto wave effect
CH17：Y wave
0
No wave
1-63
Small wave
64-127
Big wave
128-191
Small
wave/speed
Auto wave effect
192-255
big wave/speed
Auto wave effect
CH18 dot mode
0-9
Highlight
brightness.Calcul
ate: channel
value %10
In here can be adjust period
of CH16，CH17
0-129
Show the number
of points, evenly
distributed.Line
display point.
Calculation: channel value
/10
130-255
Show the number

V
of points, evenly
distributed.Bolt
show points
●Maintenance
It is very important to keep this RGB animation laser light clean, therefore please clean Dust-proof glass monthly
to keep the lights away from dust, dirt or fog juice.