Nex-tech XC5906 User manual

XC5906
10 in 1
Multifunction USB
Type-C Power Hub
10 in 1
Multifunction USB
Type-C Power Hub
Instruction Manual

Note:
The USB-C source devices (mobile/notebook/tablet PC)
must support video output.
The USB-C source devices (mobile/notebook/tablet PC)
must support OTG.
If the power supply ability of USB-C source
devices (mobile/notebook/tablet PC) can not satisfy
product use, please insert it into the USB-C Power Delivery
port for power supply in case of any unstable connections.
1. Ethernet Port
2. VGA Port
3. HDMI Port
4. PD3.0
5. 3.5mm Audio Port
6. USB-A 3.0 Port
7. SD & microSD Card Port
This is a metallic multifunctional USB-C hub, which can
extend the USB-C port on your laptop. More ports can
be extended including HDMI, VGA, Ethernet, USB-A 3.0
and USB-C female PD charge.
Product Introduction
Product Diagram
43
1
6
2
5
7

Features
Support SST
Foldable Design
Comply with USB-C interface specification
Built in conversion chip, plug and play
1. Max Ethernet Speed: 1000Mbps.
2. VGA:
1080P@60HZ, downward compatible with ,1080I , 720P.
3. HDMI:
4Kx2K 30HZ(3840x2160), downward compatible
with 1080P, 1080I, 720P.
HDMI will be 1080P@60HZ while HDMI & VGA.
work simultaneously.
4. USB-C Female Charging Port:
PD3.0; Support 100W power in; Power out
(charging) is limited to 87-96W for safety.
5. 3.5mm Analog Audio Output
6. USB-A 3.0:
Transmission speed 5Gbps, downward compatible
with USB2.0; power supply up to 4.5W Max.
7. SD/TF Card Reader:
Read: 20-40MB/s; Write: 10-30MB/s;
Data transfer rates are subject to the speed of the
memory card itself and your computer's USB port.
Ambient Working Temperature: 0°C-70°C (32°F- 158°F)
Storage Temperature: -30°C-120°C (-22°F- 248°F)
Ambient Humidity: 20% - 80% RH
Storage Humidity: 20% - 90% RH
Storage Conditions

Connection
PD3.0
Mobile
Notebook
Tablet PC
USB-A 3.0 x 3
Note :
1. For Video output, USB-C source devices must support video output.
2. Charging power should be maintained between 87 and 96 watts
f or optimal efficiency.
SD & microSD
Card Reader
Distributed by:
Electus Distribution Pty. Ltd.
320 Victoria Rd, Rydalmere
NSW 2116 Australia
www.electusdistribution.com.au
Made in China