Nexcom Nano 1190 User manual

NEXCOM International Co., Ltd.

Published December 2016 www.nexcom.com

NEXCOM International Co., Ltd.

Mobile Computing Solutions

MVS 5200/5210/5210-R & NANO 1190

NVR User Manual

Contents

Preface: Quick Installation Guide........................... 1

System Configuration: .....................................................................1

Playback: .........................................................................................3

Chapter 1: Main Console ........................................ 4

1. System Information.....................................................................5

2. Screen Division:...........................................................................5

3. Sub-screen:.................................................................................6

4. Snapshot: ...................................................................................6

5. Audio Volume Control: ...............................................................6

6. System Setting:...........................................................................7

6.1 Camera Page at System Setup Dialog: ....................................7

6.1.1 Auto Setting .....................................................................8

6.1.2 Template Setting:..............................................................9

6.1.3 Camera List: ...................................................................10

6.1.4 Camera Setting:..............................................................11

6.1.5 Search Camera: ..............................................................14

6.2 Recording Page at System Setup Dialog:...............................15

6.3 Network page at System setup dialog:..................................17

6.4 System Page at System Setup Dialog: ...................................19

6.5 User Page at System Setup Dialog: .......................................22

6.6 Motion Detection Page at System Setup Dialog: ...................24

7. System Management: ...............................................................26

7.1 System Management:...........................................................26

7.2 Disk Management: ...............................................................33

7.3 Snapshot:.............................................................................34

7.4 Event Snapshot: ...................................................................35

8. Event Setting: ...........................................................................37

8.1 Add a New Event: ................................................................37

8.2 Modify Existing Event Schedule or Action: ............................39

8.3 Delete Existing Event Schedule or Action: .............................39

8.4 Action Types:........................................................................40

9. Log Viewer: ..............................................................................42

iii

Contents

9.1 System Log:..........................................................................42

9.2 Event Log: ............................................................................43

9.3 Bit-rate Log: .........................................................................44

10. Schedule Monitor: ..................................................................45

10.1 Two-way Audio: .................................................................45

10.2 Audio Volume Adjustment: ................................................45

10.3 PTZ Control: .......................................................................45

10.4 E-map: ...............................................................................47

Chapter 2: Playback .............................................. 49

1. Search History Record Data: ......................................................50

2. Playback Control Button(s):.......................................................52

3. Convert to AVI file: ...................................................................54

4. Backup: ....................................................................................54

5. Playback Status:........................................................................55

6. Sequential Search: ....................................................................55

Chapter 3: Remote Service ................................... 57

1. Installation:...............................................................................57

2. Login: .......................................................................................57

3. Live Preview: .............................................................................58

4. Playback: ..................................................................................60

4.1 Search History Recorded File(s):.............................................61

4.1.1 Search history file(s) dialog:.............................................61

4.1.2 Select a day to search history file(s): ................................62

4.1.3 Select record mode(s) / Event Type: .................................62

4.1.4 Start search:....................................................................63

4.1.5 Review history record file(s) in search period: ..................63

4.1.6 Assign time period of search result:.................................63

4.1.7 Select the camera(s) to playback: ....................................64

4.1.8 Start playback history file(s):............................................64

4.2 Playback Control Button(s): ..................................................65

4.3 Playback Speed Control:.......................................................65

4.4 Division Control Buttons:......................................................66

4.5 Convert to AVI file:...............................................................66

4.5.1 Convert file dialog: .........................................................67

4.5.2 Select a day to convert history file(s): ..............................67

4.5.3 Assign time slice to convert job:......................................68

Contents

4.5.4 Select cameras to convert job: ........................................68

4.5.5 Select a folder to save converted file: ..............................68

4.5.6 Start converting job: .......................................................68

4.6 Backup:................................................................................69

4.6.1 Backup file dialog: ..........................................................69

4.6.2 Select a day to backup:...................................................70

4.6.3 Assign time slice to backup job: ......................................70

4.6.4 Select cameras to backup job:.........................................70

4.6.5 Select a folder to save backup file(s):...............................70

4.6.6 Start backup job: ............................................................70

4.7 Switch Audio Play Mode:......................................................71

4.8 Playback Setting: ..................................................................71

4.9 Snapshot Dialog: ..................................................................72

4.9.1 Snapshot all dialog: ........................................................72

4.9.2 Select snapshot image: ...................................................72

4.9.3 Select snapshot folder:....................................................73

4.9.4 Select file format: ...........................................................73

4.9.5 Save snapshot images:....................................................73

4.9.6 Saved image file name:...................................................73

4.10 Playback Status: .................................................................74

4.11 Operation With Sub-screen: ...............................................74

4.11.1 Define display camera(s) sequence: ...............................74

4.11.2 Digital zoom at sub-screen:...........................................75

4.11.3 Switch to Fullscreen: .....................................................75

4.11.4 Snapshot of sub-screen:................................................75

4.11.5 Motion Search: .............................................................77

4.11.6 Sequential Search: ........................................................78

4.11.6.1 Define search time period: .........................................79

4.11.6.2 Start search and rollback:...........................................80

4.11.6.3 Detail window for snapshots:.....................................81

4.11.6.4 Preview mode of search result:...................................81

5. Remote System Setting: ............................................................82

5.1 Camera Setting: ...................................................................82

5.2 Schedule Setting: .................................................................85

5.3 Network Setting: ..................................................................87

5.4 System Setting: ....................................................................89

5.5 User Setting: ........................................................................91

5.6 Motion Config: ....................................................................93

Contents

6. Remote System Management: ..................................................95

6.1 Maintenance: .......................................................................95

7. Remote Event Setting:...............................................................97

7.1 Add a New Event: ................................................................98

7.2 Modify Existing Event Schedule or Action: ............................99

7.3 Delete Existing Event Schedule or Action: ...........................100

7.4 Action Types:......................................................................100

Chapter 4: Utility................................................. 103

1. Event File Viewer.....................................................................103

Preface: Quick Installation Guide

System Configuration:

1. Power on the MVS 52 series/NANO 1190 and wait until the system boots.

2. Login to the NVR system, default username is “admin” without

password.

PrefaCe: QuiCk installation Guide

3. Click to enter system setting pages.

4. Click “Auto Setting” button at Camera’s setting page, the system

will automatically insert camera from the intranet or camera

connected to the NVR’s switch.

Preface: Quick Installation Guide

5. Configure each camera’s parameters for streaming.

6. Configure each camera’s recording schedule at “Recording” page.

7. Click the “OK” button to save settings and start recording jobs.

Preface: Quick Installation Guide

Playback:

1. Click to enter the playback page.

2. Click to enter the record data search dialog.

3. Select a playback date on calendar control, and click the “Search”

button to start searching record data.

4. Select cameras and playback time period on search result by

dragging a time bar on the timeline or via date-time picker control.

5. Click the “OK” button to prepare playback data and return to the

playback main page.

6. Click to start playback.

Chapter 1: Main Console

This is the main control panel of the system. It provides live stream preview,

system setup, two-way audio, playback, volume control, snapshot, start or

stop monitor, and PTZ controls.

ChaPter 1: Main Console

Divide buttons Login/

Logout

PTZ

buttons

System

information

Function

buttons

Display

preview

Chapter 1: Main Console

1. System Information

System Information

Date

Logout current user

Time

Display version number

Weekday

Schedule Recording

Event alarm status

HDD available space

2. Screen Division:

Configure the preview screen to a particular layout division by clicking

these buttons.

Button Description

Switch to Division 1

Switch to Division 4

Switch to Division 9

Switch to full screen. Right click the mouse button

to cancel full screen mode.

Chapter 1: Main Console

3. Sub-screen:

Digital Zoom

Sub-screen window supports digital zoom, the operation steps are as

follows:

1. Click on preview image to switch current focus channel.

2. Scroll the mouse wheel, forward for digital zoom-in, and backward

for zoom-out.

3. Switch division mode will reset digital zoom status to default.

Popup Menu

Right click the mouse button, select an option from the popup menu.

1. Change current channel display camera.

2. Change current division mode.

3. Switch current channel display ratio mode.

4. Switch to Full Screen mode / Cancel Full Screen mode.

5. Reset all channels to default camera list.

6. Snapshot current display.

7. Enable / Disable Auto Switch.

4. Snapshot:

Click to take a snapshot to the hard disk drive, you can manage

snapshots at the system management “snapshot” page.

5. Audio Volume Control:

Click to switch between mute or unmute.

Status Description

System is on unmute mode.

System is on mute mode.

Chapter 1: Main Console

6. System Setting:

Click setup button and select “System Setting” from the pop-up

menu to enter the System Setting dialog.

6.1 Camera Page at System Setup Dialog:

Chapter 1: Main Console

6.1.1 Auto Setting

Click the “Auto Setting” button to automatically add

cameras to the system. Maximum number of cameras

supported depends on NVR’s model.

After clicking the button, the system will show the fuzzy

search filter dialog, you can filter the search by model name,

IP address or MAC address, or you can keep them empty to

search all cameras.

Auto setting can insert intranet’s cameras, even ones located

behind several switch hubs. Alternatively, you can directly

insert cameras on the NVR’s switch hub, then click the

“Auto Setting“ button to add them into the system.

Using the “Auto Setting“ function, you won’t need to key-

in any network IP or subnet mask parameters, you only need

to click “Auto Setting“ button to add IP cameras.

Chapter 1: Main Console

6.1.2 Template Setting:

When you use “Auto Setting” to add a new camera,

the system will use the camera template from “Template

Setting” to set the camera parameters.

After you confirm the template, in most cases, you will no

longer need to set camera’s parameters again.

You can configure the quick template from the camera

setting page, in most cases you only need to set the

camera’s resolution and frames per second.

If you need to set a more detailed template, please click the

“Advanced” button to enter the template setting dialog.

Resolution:

The new camera will try to fit the selected resolution, if you

select “Max”, camera will use the maximum resolution, or

you could select another resolution, in which the system will

choose the next closest supported resolution of the camera.

Chapter 1: Main Console

FPS:

Set the frames per second of camera, system will try to set a

near or equal FPS to camera.

Rate Control:

Set the rate control algorithm of the new camera.

Quality:

If you select EVBR for new cameras, you can set the VBR

quality here.

Account:

Setup the default login camera user account.

Password:

Setup the default login camera password.

6.1.3 Camera List:

List all the inserted IP camera’s name, click the row of

camera to display detailed information and live stream video.

Tick the check box to enable the camera, otherwise the

camera will be disabled.

This camera is enabled.

This camera is disabled.

If the camera is disabled, NVR will not connect to it. This will

keep the camera settings stored in the system without using

any system performance and won’t add any error messages.

Chapter 1: Main Console

Switch Camera Sequential:

Right click on the camera, and select another camera in the

popup menu, the system will switch these two camera’s

setting.

Quick Setup:

1. Select a camera

2. Click the “Quick Setup” button.

3. Select a action:

i. Copy to:

Copy selected camera’s setting to all channels or a

single channel

ii. Switch To:

Switch selected camera and target camera sequential

position.

iii. Remove all:

Remove all camera setting.

6.1.4 Camera Setting:

Key-in or modify camera’s information here.

Vendor:

Select camera’s vendor or use ONVIF protocol.

Detect:

Check available cameras and respective model names.

Camera Name:

Key in camera name here.

Chapter 1: Main Console

IP Address:

Key in camera’s IP address.

HTTP port:

Set camera’s HTTP port, default is 80.

RTSP port:

Set camera’s RTSP port for TCP streaming, default is 554.

ONVIF Authentication:

Select connect to camera with WSSE authentication or

without authentication.

User Name:

Set the Username for camera login.

Password:

Set the Password for camera login.

Chapter 1: Main Console

Set Parameter:

Select stream profile / resolution for preview and recording.

Select the FPS of the display and recording frame rate.

Enable Audio to receive audio stream, enable it when you

need live audio and record audio to files.

Enable Audio Record to record audio to files.

Enable Two Way Audio when you need to send voice data

to the IP camera.

Adjust Input and Output Gain value with IP camera.

• The parameter dialogs are different with each

vendor, depending on the camera’s capability.

Add Camera:

1. Click “Search” and wait till search completes.

2. Select a camera on the search result list.

3. Preview live stream video at the preview window to

confirm current camera.

4. Click “Add” to add selected camera into system.

Chapter 1: Main Console

Delete Camera:

1. Select a camera from installed camera list.

2. Click “Delete” to remove the selected camera from the

list.

Update Camera Setting:

1. Select a camera from the installed camera list.

2. Modify camera’s setting at each setting field.

3. Click “Update” to save the modified result.

• Updated settings will write to disk after clicking “OK” at

the bottom of the page. If you click “Cancel” to leave

the setting page, the system will discard all your modified

settings.

Clear Button:

Clear all setting fields.

6.1.5 Search Camera:

Click “Search” button, system will list all the cameras

detected in the “Search List”, you can click on each row to

preview live video stream.

You can click on the header column to sort the current row

data.

Chapter 1: Main Console

6.2 Recording Page at System Setup Dialog:

The system supports weekly schedule recording, you can define

different schedules for each camera and each weekday here.

Configure recording schedule steps:

1. Select a camera:

Click on camera list to select a

camera to configure.

2. Select a weekday:

Click on a weekday bar, system

will list time periods for this

weekday.

3. Configure time period:

Add new period:

Drag the mouse cursor on a

blank area, or click the “Insert”

button.

This manual suits for next models

Table of contents

Other Nexcom DVR manuals

Nexcom

Nexcom NViS 5604-SERIES User manual

Nexcom

Nexcom NViS 1482 Series User manual

Popular DVR manuals by other brands

Lawmate

Lawmate PV-RC200HD Operation manual

TiVo

TiVo Series3 HD quick start guide

urmet domus

urmet domus 1093/040 instruction manual

JVC

JVC HM-DH40000U instructions

Swann

Swann Advanced Quad Processor Easy setup guide

Honeywell

Honeywell HD-DVR-1004 quick start guide

TeleEye

TeleEye RN284 user manual

Next Premium H.264 user manual

CBC

CBC Digimaster DR8HL instruction manual

Toshiba

Toshiba SD-1700 owner's manual

EverFocus

EverFocus VANGUARD 4x2H user manual

Interlogix

Interlogix TruVision DVR 41 quick start guide

Conceptronic

Conceptronic C8CHCCTVKITP User's installation and operation manual

Sony

Sony Handycam Vision video Hi8 XR CCD-TRV87 operating instructions

ID View

ID View IV-LP16D1 user manual

Vitek

Vitek VT-EH Series Quick installation guide

Samsung

Samsung SRN-473S Quick manual

Toshiba

Toshiba surveillix KV-PCDVR Operation manual

Nexcom NANO 1190 User manual

Popular DVR manuals by other brands