NexSens SP Series User manual

2091 Exchange Court
Fairborn, Ohio 45324
937-426-2703
www.NexSens.com
NexSens SP-Series Solar Power Pack
Quick Start Guide
1
The SP-Series Solar Power Packs feature a solar panel, regulator, and battery
housed in a weather tight enclosure. Solar Power Packs are used to provide
continuous power for X2 and V2 systems.
Installation
1. Install the mounting bracket onto a 1-½” to 2” pole using the included U-Bolt
hardware or attach the bracket to a panel as shown.
a. Ensure the arrow on the back of the bracket is pointing up.

2091 Exchange Court
Fairborn, Ohio 45324
937-426-2703
www.NexSens.com
NexSens SP-Series Solar Power Pack
Quick Start Guide
2
2. Install the solar panel onto the mounting bracket by inserting one of the
included ¼-20 x 1-½” screws through the center hole of both pieces and
tightening with a 3/16 hex driver.
3. Tilt the panel to the desired angle (30° or 45°) and lock into place by
inserting the second included ¼-20 x 1-½” screw through both parts and
tightening.
4. Connect the UW-6 plug on the Solar Power Pack to the device to supply
power.