Next Highbury 676207 User manual

676207

HIGHBURY PAINTED CHANGER CHEST
676207
Assembly instructions
Warnings Number of people required to assemble
Important: Retain these instructions for future reference.
Time to assemble
Do's Tools required
Missing parts
Home service technicians
You can write to us at:
Produced in China for NEXT Retail Ltd. 1
676207-2014-V1.
WARNING Do not leave your child unattended-your child's safety is your
responsibility.
BEFORE YOU START
Two peoples are required to assemble this item
Don'ts
Look out for the symbol througout this manual. Wherever you see it we will
have a handy tip to help you with the assembly of your product.
If you are missing anyfixtures and fittings for your product. Please contact our
customer service team on 0333 777 8999 and they will be happy to arrange for
a replacement to be sent to you free of charge
If you have a fault with your product. Please contact our customer service team
on 0333 777 8999. If you have had the product for 28 days or less you may be
offered a replacement,refund or for a fully trained home service technician to
visit your home to assess the fault and repair the product where possible. If you
have had the product for more than 28 days we will send an independant home
service technician to review and repair the product where possible and
recommend further action.
Next Retail Ltd.
Desford Road,
Leicester,
LE 19 4AT
Home customer Services
Do ont place your changer or dresser in the close proximity of an open
fire and the sources of heat, such as radiators, electric or gas fires.
To view our full furniture range please visit www.next.co.uk
Due to the size of the product we recommend that it is assembled in the
room intended for use.
Take care that no screws are loose, because a child could trap parts
of the body or clothing, which could pose a risk of strangulation.
Unwrap all packaging materials and place the components on a clean
surface to protect it from damage, We recommend that the packaging is
used to protect the surfaces during assembly.
Carefully check that you have all the parts before beginning assembly.
Never allow anykind of liquid to remain on your furniture. Absorption can
cause wood to warp or finishes to de-laminate.
Do not place your changer in the close proximity of windows.
WARNING Do not use the changer or dresser if any part is broken, torn
or missing.
WARNING There are many small components used in the
construction of this changer or dresser, these items should be kept
out of reach of young children whilst assembling the unit.
Place your changer or dresser on a stable surface.
Please periodically check all fittings and re-tighten as necessary. Please
do not drag or pull your furniture.
Wipe occasionally with a soft cloth slightlydampened with water. Then
buff with a dry clean soft cloth.
Wipe occasionally with a soft cloth slightlydampened with water. Then buff
with a dry clean soft cloth.
We recommend a changing pad no more than 3cm in thickness.
When you are ready to start, make sure that you have the right tools
and plenty of space.
Avoid exposing the furniture to excessive heat or direct sunlight as this can
cause deterioration of the colour.
WARNING Never leave babies unattended.
not supplied not supplied
PH2
CORSICA COFFEE TRUNK
896938
Assembly instructions
1
SPECIAL TIPS FOR FITTING CAM-LOCKS
AND CAM-PILLARS
CAM-LOCK
WHEN FITTING CAMS
ENSURE STARTING POSITION CORRECT
BEFORE YOU INSERT CONNECTING CAM-PILLAR
TURN CLOCKWISE UNTIL SECURE
Align with long point of cross
CORRECT WRONG
Pillar head needs to be in centre
CAM-PILLAR
Tighten until shoulder is flush
with panel.Do not overtighten
or undertighten (see example below) Shoulder
NO GAP
Panel
Panel
Tips
1.5 hour

676207
GETTING TO KNOW YOUR PRODUCT

676207

WHEN FITTING CAMS
ENSURE STARTING POSITION CORRECT
BEFORE YOU INSERT CONNECTING CAM-PILLAR
TURN CLOCKWISE UNTIL SECURE
Align with long point of cross
CORRECT WRONG
Pillar head needs to be in centre
Insert the cam lock into the face of the
panel in the positions shown. Ensure
that the opening in the base of the cam
faces the hole in the edge of the panel
as shown;this allows the head of the cam dowel
to locate properly in the cam lock...
CORSICA COFFEE TRUNK
896938
Assembly instructions
Produced in China for Next Retail Ltd.
896398-2014-V1. 6
Produced in China for Next Retail Ltd.
896398-2014-V1.
not supplied
PH2 K x2 4 x 21mm
not supplied
PH2 E x8 4 x 38mm
Screw locations are marked with a
punch mark.You furniture is
assembled using a cam lock and
dowel system. This system combines a
quick and easy assembly with strenght and a
clean finish.
not supplied
PH2 C x4 10 x 15mm
not supplied
B x86 x 30mm
CAM-PILLAR
Tighten until shoulder is flush
with panel.Do not overtighten
or undertighten (see examplebelow) Shoulder
NO GAP
Panel
Panel
not supplied
PH2 D x4 7 x 35mm
1
2 3
4
not supplied
not supplied
676207
not supplied
H
H
H
H
H
H
20
9×2
19×2
not supplied
PH2
H
HH
H
A×6
A×6 E
2
3

not supplied
PH2
B×6
9
4
18
3
II
I
I
I
I
I
I
I
I
I
4
20
2
3
5
5
676207
not supplied
PH2

B×6
3
2
I×6
1
17
676207
not supplied
PH2
not supplied
PH2

I
I
3
2
I×6
1
2
3
676207
not supplied
PH2
not supplied
PH2

WHEN FITTING CAMS
ENSURE STARTING POSITION CORRECT
BEFORE YOU INSERT CONNECTING CAM-PILLAR
TURN CLOCKWISE UNTIL SECURE
Align with long point of cross
CORRECT WRONG
Pillar head needs to be in centre
Insert the cam lock into the face of the
panel in the positions shown. Ensure
that the opening in the base of the cam
faces the hole in the edge of the panel
as shown;this allows the head of the cam dowel
to locate properly in the cam lock...
CORSICA COFFEE TRUNK
896938
Assembly instructions
Produced in China for Next Retail Ltd.
896398-2014-V1. 6
Produced in China for Next Retail Ltd.
896398-2014-V1.
not supplied
PH2 K x2 4 x 21mm
not supplied
PH2 E x8 4 x 38mm
Screw locations are marked with a
punch mark.You furniture is
assembled using a cam lock and
dowel system. This system combines a
quick and easy assembly with strenght and a
clean finish.
not supplied
PH2 C x4 10 x 15mm
not supplied
B x86 x 30mm
CAM-PILLAR
Tighten until shoulder is flush
with panel.Do not overtighten
or undertighten (see examplebelow) Shoulder
NO GAP
Panel
Panel
not supplied
PH2 D x4 7 x 35mm
1
2 3
4
10
10
2
3
not supplied
PH2
12
A
AA
C
B
D
B
B
B
13
14
16
12
H×2
H×2
not supplied
676207
not supplied
PH2
not supplied
PH2
not supplied
PH2
not supplied
PH2
M×5
N×5
N×22

K
J
K
J
K
J
11 15
I×4
I×4
F×2
676207
I
not supplied
PH2
not supplied
PH2
not supplied
PH2
10
10
2
3
not supplied
PH2
12
A
AA
C
B
D
B
B
B
13
14
16
12
H×2
H×2
not supplied
676207
not supplied
PH2
not supplied
PH2
not supplied
PH2
not supplied
PH2
M×5
N×5
N×22

S×2
S×2
S×2
S×2
T
676207
8
2
1
6
7
7
not supplied
E
E
E
E
E
E
E
E

1
not supplied
PH2
676207
8
6
7
7
O×4
P×2
Q×2
O×6

When you use the top changer,please attach the wall strap on
Please attach the wall strap on rear of the top panel.
rear of the changer , If you no need the changer and removed .
not supplied
PH2
3 3
LRG
676207
Move the item into position and attach the end of the strap to the wall
WARNING: Always ensure the area to be drilled is free from hidden
electrical wires, water and gas pipes.
NOTE: Wall fixings are not included, please source suitable fixings for your
wall type, if in doubt, please consult a qualified tradesman.
with the approciate screw, washer and wall plug for your wall type.