If you have any problems with this product or require any
replacement fittings please contact Customer Services Tel:
0844 844 8999
• WARNING: Do not leave the child unattended;
• Please note that all assembly fittings shall aways be correctly tightened and checked regularly;
• Weight of the child the product is the intended up to a max.weight of 15 kg;
• Any additional or replacement parts shall only be obtained from the manufacturer or distributor;
• Do not to use the changing unit when any part is broken ,torn or missing;
• Wall fixings are not included.
• When mat fitted, there must be a maximum gap of 30mm between the mat sides and ends and the barrier sides andends.
•This item should not be dismantled for transportation or storage.
• Ensure the product is protected with mats and coasters when items are placed on the surfaces, to prevent scratching or damage.
• Do not put hot dishes directly on the surfaces of the item.
• Made from honeycomb board, partical board & MDF with a wood effect finish.
• Keep fittings out of children's reach and keep children well away from the construction area.
• Any spills should be removed immediately with a soft clean damp cloth and dried immediately.
• Made in China.
• Do not use furniture polish.
• A minimum of two persons is required to assemble this product.
• We recommend the use of the wall attachment bracket/strap provided for safety reasons.
• Do not rub or scrub the surface when cleaning.
ASSEMBLY INSTRUCTIONS.
IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.
Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is found to be faulty.
Should you need to return the unassembled product, please repack in the original packaging.
IMPORTANT
• We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step
instructions.
• Carefully check that you have all parts before beginning assembly.
• Be aware of the risk of open fire and other sources of strong heat,such as electric bar fires,gas fires etc.in the vicinity of the
changing unit;
• Please do not apply adhesive substrates for example , sticky tape to the product.
• We recommend that the packaging is used to protect the surfaces during assembly.
• For general cleaning, periodically dust with a soft cloth.
• Avoid keeping furniture in direct sunlight or close to any heat sources as this can cause cracking, discolouration or warping.
• Never drag pieces of furniture across the floor as this will cause damage to the joints.
• All assembly fixings should always be tightened properly and periodically check all fixings and tighten if necessary.
• The changing unit requires a changing mat measuring a maximum width of 510 mm / length of 740mm and thickness of 30mm.
882871 LITTLE HADBURY CHANGING STATION
882871 LITTLE HADBURY CHANGING STATION882871 LITTLE HADBURY CHANGING STATION
882871 LITTLE HADBURY CHANGING STATION
Page 1 of 11
