Activating the Nexus Hawk™
Accessing the Management
Console
Connecting to a Cellular Data
network
• Connect the Nexus Hawk to DC
power (11.5v to 52v, center pin +)
• Connect the supplied RED Ethernet
crossover ca le etween the
computer and the Nexus Hawk’s
“Eth1” port.
• Open a we rowser and enter the
following into its Address line:
http://192.168.1.1
• Defaults:
o User name = manager
Password = manager
• Assure you are using a
“Preferred Card” (see we -site)
• Provision the data card prior to
inserting it into the Nexus Hawk
• Insert it into the Nexus Hawk
o Most cards will auto-discover
o Some may need you to enter
a “Custom APN” in
SETUP|PCMCIA. Ask your
data carrier if needed.
Connecting an IP Video Camera
or Digital Video Recorder (DVR)
(Optional) Activating Wi-Fi
(Optional) Activating GPS
• Follow “Accessing the Management
Console” a ove
• Select “Help” utton on the Splash
Screen
• Select the document titled “Quick
Configuration Guide”
• Follow “Accessing the Management
Console” a ove
• Select “Help” utton on the Splash
Screen
• Select the document titled “Quick
Configuration Guide”
• Follow “Accessing the
Management Console” a ove
• Select “Help” utton on the
Splash Screen
• Select the document titled “Quick
Configuration Guide”
NOTE: It may take your GPS up to
30-minutes to locate itself the
FIRST time that it is powered up.
The fewer o structions to the sky,
the faster this operation is.
External antenna is required.
Revised 2007-10
Activating the Nexus Hawk™
Accessing the Management
Console
Connecting to a Cellular Data
network
• Connect the Nexus Hawk to DC
power (11.5v to 52v, center pin +)
• Connect the supplied RED Ethernet
crossover ca le etween the
computer and the Nexus Hawk’s
“Eth1” port.
• Open a we rowser and enter the
following into its Address line:
http://192.168.1.1
• Defaults:
o User name = manager
Password = manager
• Assure you are using a
“Preferred Card” (see we -site)
• Provision the data card prior to
inserting it into the Nexus Hawk
• Insert it into the Nexus Hawk
o Most cards will auto-discover
o Some may need you to enter
a “Custom APN” in
SETUP|PCMCIA. Ask your
data carrier if needed.
Connecting an IP Video Camera
or Digital Video Recorder (DVR)
(Optional) Activating Wi-Fi
(Optional) Activating GPS
• Follow “Accessing the Management
Console” a ove
• Select “Help” utton on the Splash
Screen
• Select the document titled “Quick
Configuration Guide”
• Follow “Accessing the Management
Console” a ove
• Select “Help” utton on the Splash
Screen
• Select the document titled “Quick
Configuration Guide”
• Follow “Accessing the
Management Console” a ove
• Select “Help” utton on the
Splash Screen
• Select the document titled “Quick
Configuration Guide”
NOTE: It may take your GPS up to
30-minutes to locate itself the
FIRST time that it is powered up.
The fewer o structions to the sky,
the faster this operation is.
External antenna is required.
Revised 2007-10
