Nexxt Solutions KS-602 User manual

Android & IOS System
Product Features
Works with Amazon Alexa and Google Home, commanded by you voice.
Control you home with your smart phone app or tablets from anywhere at anytime.
Timing switch to turn ON/OFF your lights and appliances automatically.
Intelligent sharing can be freely Shared with family members
Refined appearance and made of fire resistant material, Safe and Durable.
Overload protection, easy to replaces your traditional mechanical switch
(Requires a neutral wire).
The Smart Switch blende well with any room decor with its elegant, minimal
design with sensitive capacitive touch control.
Its LEDs can guide you at night when lights go off and you an simply turn it
ON/OFF by directly pressing.
Specifications
Type
Model
Power supply mode
Rated Current
Rated Voltage
Rated Power
Wireless Frequency
Wireless Standard
120 Wi-Fi Smart Wall Light Switch
KS-602
Neutral-Live Wire
15A(Max)
AC110-125V~50/60Hz
1650W
2.4GHZ
IEEE802.11 b/g/n
Attention
Products can only be paired on 2.4G-Wifi-Router, don’t accept the
5G-Wifi-Router
Please set your home Wi-Fi account name and passwords use numeric
and letters, don’t use special symbols
Wall Switch(Load/live)
(Required connect the Load/Live wires
correctly. they are not interchangeable.
if you are not sure which of the two
wires is live and which is load,
simply try one configuration)
Load Live
Neutral
Ground
Note: verify all the connections are correct
and wire nuts are screwed tightly
(Optional .
suggest to connect up)
The ground line (Required)
(Required)
INSTALL THE WALL SWITCH
Version :KKS602201712122.0
Cut off the power before installation
Please use it only when it’s installed with RCD
or current leakage protector at home

Federal Communications Commission (FCC) Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
●Reorient or relocate the receiving antenna.
●Increase the separation between the equipment and receiver.
●Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
●Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications made to this device not expressly approved by NEXXT
SOLUTIONS may void the FCC authorization to operate this device.
Note: The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the user’s
authority to operate the equipment.
RF exposure statement:
The transmitter must not be colocated or operated in conjunction with any other antenna or
transmitter. This equipment complies with the FCC RF radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and operated with a
Minimum distance of 20cm between the radiator and any part of your body.