Danfoss KP 34 User manual

KP 34, KP 35, KP 36 and KP 37 Ptest max.
t1min. -40 °F KP 34: 87 psi
t1max. 149 °F KP 35: 319 psi
KP 36: 319 psi
t2min. -40 °F KP 37: 465 psi
t2max. 212 °F
No maintenance is required for the switches after nal installation.
CAUTION:
The mounting panel must be plane to avoid damage of switch.
Installation guide
Pressure switch
Types KP 34, KP 35, KP 36 and KP 37
© Danfoss A/S (AC-MCI / jmn), 2013-11 IC.PI.P10.E3.02 / 520B5882 1
060R9365 060R9365

Please note: scale in KP units is indicative only. For accurate
setting or when using according to FM approval use additional
pressure gauge to set the unit.
2 IC.PI.P10.E3.02 / 520B5882 © Danfoss A/S (AC-MCI / jmn), 2013-11
CAUTION:
Disconnect power supply before wiring connections are made or service to avoid possible electrical shock or damage
to equipment.
Do never touch live parts with your ngers or with any tool.
When used acc. to UL or FM regulations
Use copper wire only
Tightening torque 20 lb. in.
Voltage
AC DC
FL
A
LR
A
Resist.
lead
Pilot
duty
240 8 48 8A 3A
120 16 96 16A
240 12W
Listed refrigeration
controller 61B5
Contact system with standard AG contacts
Single pole changeover switch (SPDT).
Alternating current:
AC-1: 16 A, 400 V
AC-3: 16 A, 400 V
AC-15: 10 A, 400 V
Direct current:
DC-13: 12 W, 220 V
Contact system with gold contacts
Single pole changeover switch (SPDT): 1…30 mA, 5...30 V DC.
Contact load when Au surface isburned away:
Alternating current:
AC-1: 10 A, 400 V
AC-3: 6 A, 400 V
AC-15: 4 A, 400 V
Direct current:
DC-13: 12 W, 220 V